# Modulo 10^9+7 (1000000007)

In most programming competitions, we are required to answer the result in 10^9+7 modulo. The reason behind this is, if problem constraints are large integers, only efficient algorithms can solve them in an allowed limited time.**What is modulo operation:**

The remainder obtained after the division operation on two operands is known as modulo operation. The operator for doing modulus operation is **‘%’**. For ex: a % b = c which means, when a is divided by b it gives the remainder c, 7%2 = 1, 17%3 = 2.**Why do we need modulo:**

- The reason of taking Mod is to prevent integer overflows. The largest integer data type in C/C++ is
*unsigned long long int*which is of 64 bit and can handle integer from 0 to (2^64 – 1). But in some problems where the growth rate of output is very high, this high range of unsigned long long may be insufficient.

Suppose in a 64 bit variable ‘A’, 2^62 is stored and in another 64 bit variable ‘B’, 2^63 is stored. When we multiply A and B, the system does not give a runtime error or exception. It just does some bogus computation and stores the bogus result because the bit size of the result comes after multiplication overflows.

- In some of the problems, to compute the result modulo inverse is needed and this number helps a lot because it is prime. Also, this number should be large enough otherwise modular inverse techniques may fail in some situations.

Due to these reasons, problem setters require to give the answer as a result of modulo of some number **N**.

There are certain criteria on which the value of N depends:

- It should just be large enough to fit in the largest integer data type i.e it makes sure that there is no overflow in the result.
- It should be a prime number because if we take mod of a number by Prime the result is generally spaced i.e. the results are very different results in comparison to mod the number by non-prime, that is why primes are generally used for mod.

10^9+7 fulfills both the criteria. It is the first 10-digit prime number and fits in int data type as well. In fact, any prime number less than 2^30 will be fine in order to prevent possible overflows.**How modulo is used:**

A few distributive properties of modulo are as follows:

- ( a + b) % c = ( ( a % c ) + ( b % c ) ) % c
- ( a * b) % c = ( ( a % c ) * ( b % c ) ) % c
- ( a – b) % c = ( ( a % c ) – ( b % c ) ) % c
~~( a / b ) % c = ( ( a % c ) / ( b % c ) ) % c~~

So, modulo is distributive over +, * and – but not over / [Please refer Modular Division for details]**NOTE:** The result of ( a % b ) will always be less than b.

In the case of computer programs, due to the size of variable limitations, we **perform modulo M at each intermediate stage** so that range overflow never occurs.

Example: a = 145785635595363569532135132 b = 3151635135413512165131321321 c = 999874455222222200651351351 m = 1000000007 Print (a*b*c)%m.Method 1:First, multiply all the number and then take modulo: (a*b*c)%m = (459405448184212290893339835148809 515332440033400818566717735644307024625348601572) % 1000000007 a*b*c does not fit even in the unsigned long long int due to which system drop some of its most significant digits. Therefore, it gives the wrong answer. (a*b*c)%m = 798848767Method 2:Take modulo at each intermediate steps: i = 1 i = (i*a) % m // i = 508086243 i = (i*b) % m // i = 144702857 i = (i*c) % m // i = 798848767 i = 798848767 Method 2 always gives the correct answer.

Function for finding factorial of a large number using modulo but at different positions.

## C++

`unsigned ` `long` `long` `factorial(` `int` `n)` `{` ` ` `const` `unsigned ` `int` `M = 1000000007;` ` ` `unsigned ` `long` `long` `f = 1;` ` ` `for` `(` `int` `i = 1; i <= n; i++)` ` ` `f = f * i; ` `// WRONG APPROACH as` ` ` `// f may exceed (2^64 - 1)` ` ` `return` `f % M;` `}` `// This code is contributed by Shubham Singh` |

## C

`unsigned ` `long` `long` `factorial(` `int` `n)` `{` ` ` `const` `unsigned ` `int` `M = 1000000007;` ` ` `unsigned ` `long` `long` `f = 1;` ` ` `for` `(` `int` `i = 1; i <= n; i++)` ` ` `f = f * i; ` `// WRONG APPROACH as` ` ` `// f may exceed (2^64 - 1)` ` ` `return` `f % M;` `}` |

## Java

`static` `long` `factorial(` `int` `n)` `{` ` ` `const` `long` `M = ` `1000000007` `;` ` ` `long` `f = ` `1` `;` ` ` `for` `(` `int` `i = ` `1` `; i <= n; i++)` ` ` `f = f * i; ` `// WRONG APPROACH as` ` ` `// f may exceed (2^64 - 1)` ` ` `return` `f % M;` `}` `// This code is contributed by rutvik_56.` |

## Python3

`def` `factorial( n) :` ` ` `M ` `=` `1000000007` ` ` `f ` `=` `1` ` ` `for` `i ` `in` `range` `(` `1` `, n ` `+` `1` `):` ` ` `f ` `=` `f ` `*` `i ` `# WRONG APPROACH as` ` ` `# f may exceed (2^64 - 1)` ` ` `return` `f ` `%` `M` `# This code is contributed by` `# Shubham Singh(SHUBHAMSINGH10)` |

## C#

`static` `long` `factorial(` `int` `n)` `{` ` ` `const` `long` `M = 1000000007;` ` ` `long` `f = 1;` ` ` `for` `(` `int` `i = 1; i <= n; i++)` ` ` `f = f * i; ` `// WRONG APPROACH as` ` ` `// f may exceed (2^64 - 1)` ` ` `return` `f % M;` `}` `// This code is contributed by pratham76.` |

## Javascript

`function` `factorial( n)` `{` ` ` `let M = 1000000007;` ` ` `let f = 1;` ` ` `for` `(let i = 1; i <= n; i++)` ` ` `f = f * i; ` `// WRONG APPROACH as` ` ` `// f may exceed (2^64 - 1)` ` ` `return` `f % M;` `}` `# This code is contributed by` `# Shubham Singh(SHUBHAMSINGH10)` |

## C++

`unsigned ` `long` `long` `factorial(` `int` `n)` `{` ` ` `const` `unsigned ` `int` `M = 1000000007;` ` ` `unsigned ` `long` `long` `f = 1;` ` ` `for` `(` `int` `i = 1; i <= n; i++)` ` ` `f = (f*i) % M; ` `// Now f never can` ` ` `// exceed 10^9+7` ` ` `return` `f;` `}` `// This code is contributed by Shubham Singh` |

## C

`unsigned ` `long` `long` `factorial(` `int` `n)` `{` ` ` `const` `unsigned ` `int` `M = 1000000007;` ` ` `unsigned ` `long` `long` `f = 1;` ` ` `for` `(` `int` `i = 1; i <= n; i++)` ` ` `f = (f*i) % M; ` `// Now f never can` ` ` `// exceed 10^9+7` ` ` `return` `f;` `}` |

## Java

`static` `long` `factorial(` `int` `n)` `{` ` ` `long` `M = ` `1000000007` `;` ` ` `long` `f = ` `1` `;` ` ` `for` `(` `int` `i = ` `1` `; i <= n; i++)` ` ` `f = (f*i) % M; ` `// Now f never can` ` ` `// exceed 10^9+7` ` ` `return` `f;` `}` `// This code is contributed by Dharanendra L V.` |

## Python3

`def` `factorial( n) :` ` ` `M ` `=` `1000000007` ` ` `f ` `=` `1` ` ` `for` `i ` `in` `range` `(` `1` `, n ` `+` `1` `):` ` ` `f ` `=` `(f ` `*` `i) ` `%` `M ` `# Now f never can` ` ` `# exceed 10^9+7` ` ` `return` `f` `# This code is contributed by` `# Shubham Singh(SHUBHAMSINGH10)` |

## C#

`static` `long` `factorial(` `int` `n)` `{` ` ` `long` `M = 1000000007;` ` ` `long` `f = 1;` ` ` `for` `(` `int` `i = 1; i <= n; i++)` ` ` `f = (f*i) % M; ` `// Now f never can` ` ` `// exceed 10^9+7` ` ` `return` `f;` `}` `// This code is contributed by Dharanendra L V.` |

## Javascript

`function` `factorial( n)` `{` ` ` `let M = 1000000007;` ` ` `let f = 1;` ` ` `for` `(let i = 1; i <= n; i++)` ` ` `f = (f*i) % M; ` `// Now f never can` ` ` `// exceed 10^9+7` ` ` `return` `f;` `}` |

The same procedure can be followed for addition.

(a + b + c) % M is the same as ( ( ( a + b ) % M ) + c ) % M.

Perform % M every time a number is added so as to avoid overflow.

**Note:** In most of the programming languages (like in C/C++) when you perform the modular operation with negative numbers it gives a negative result like -5%3 = -2, but what the result comes after the modular operation should be in the range 0 to n-1 means the -5%3 = 1. So for this convert it into a positive modular equivalent.

## C++

`int` `mod(` `int` `a, ` `int` `m)` `{` ` ` `return` `(a % m + m) % m;` `}` `// This code is contributed by` `// Shubham Singh(SHUBHAMSINGH10)` |

## C

`int` `mod(` `int` `a, ` `int` `m)` `{` ` ` `return` `(a%m + m) % m;` `}` |

## Java

`static` `int` `mod(` `int` `a, ` `int` `m)` `{` ` ` `return` `(a%m + m) % m;` `}` `// This code is contributed by` `//Shubham Singh(SHUBHAMSINGH10)` |

## Python3

`def` `mod(a, m):` ` ` `return` `(a` `%` `m ` `+` `m) ` `%` `m` `# This code is contributed by` `# Shubham Singh(SHUBHAMSINGH10)` |

## C#

`static` `int` `mod(` `int` `a, ` `int` `m)` `{` ` ` `return` `(a % m + m) % m;` `}` `// This code is contributed by` `//Shubham Singh(SHUBHAMSINGH10)` |

## Javascript

`function` `mod( a, m)` `{` ` ` `return` `(a%m + m) % m;` `}` |

But the rules are different for division. To perform division in modulo arithmetic, we need to first understand the concept of modulo multiplicative inverse.

**Modulo multiplicative Inverse(MMI):**

The multiplicative inverse of a number y is z **iff (z * y) == 1.**

Dividing a number x by another number y is the same as multiplying x with the multiplicative inverse of y.

x / y == x * y^(-1) == x * z (where z is multiplicative inverse of y).

In normal arithmetic, the multiplicative inverse of y is a float value. Ex: Multiplicative inverse of 7 is 0.142…, of 3 is 0.333… .

In mathematics, the modular multiplicative inverse of an integer ‘a’ is an integer ‘x’ such that the product ax is congruent to 1 with respect to the modulus m.

ax = 1( mod m)

The remainder after dividing ax by the integer m is 1.

Example: If M = 7, the MMI of 4 is 2 as (4 * 2) %7 == 1, If M = 11, the MMI of 7 is 8 as (7 * 8) % 11 == 1, If M = 13, the MMI of 7 is 2 as (7 * 2) % 13 == 1.

Observe that the MMI of a number may be different for different M.

So, if we are performing modulo arithmetic in our program and we need the result of the operation x / y, we should NOT perform

z = (x/y) % M;

instead, we should perform

y_inv = findMMI(y, M); z = (x * y_inv) % M;

Now one question remains.. How to find the MMI of a number n.

There exist two algorithms to find MMI of a number. First is the **Extended Euclidean algorithm** and the second using **Fermat’s Little Theorem**.

You can find both the methods in the given link:

Modular multiplicative inverse

Finding modular multiplicative inverses also has practical applications in the field of cryptography, i.e. public-key cryptography and the RSA Algorithm. A benefit for the computer implementation of these applications is that there exists a very fast algorithm (the extended Euclidean algorithm) that can be used for the calculation of modular multiplicative inverses.**References: **

https://www.quora.com/What-exactly-is-print-it-modulo-10-9-+-7-in-competitive-programming-websites

https://discuss.codechef.com/questions/4698/use-of-modulo-1000007-in-competitions

https://codeaccepted.wordpress.com/2014/02/15/output-the-answer-modulo-109-7/

This article is contributed by **Akash Gupta**. If you like GeeksforGeeks and would like to contribute, you can also write an article using write.geeksforgeeks.org or mail your article to review-team@geeksforgeeks.org. See your article appearing on the GeeksforGeeks main page and help other Geeks.

Please write comments if you find anything incorrect, or you want to share more information about the topic discussed above.