There are two vessels of capacities ‘a’ and ‘b’ respectively. We have infinite water supply. Give an efficient algorithm to make exactly 1 litre of water in one of the vessels. You can throw all the water from any vessel any point of time. Assume that ‘a’ and ‘b’ are Coprimes.

Following are the steps:

Let V1 be the vessel of capacity ‘a’ and V2 be the vessel of capacity ‘b’ and ‘a’ is smaller than ‘b’.

**1)** Do following while the amount of water in V1 is not 1.

….**a)** If V1 is empty, then completely fill V1

….**b)** Transfer water from V1 to V2. If V2 becomes full, then keep the remaining water in V1 and empty V2

**2)** V1 will have 1 litre after termination of loop in step 1. Return.

Following is C++ implementation of the above algorithm.

## C++

`/* Sample run of the Algo for V1 with capacity 3 and V2 with capacity 7 ` `1. Fill V1: V1 = 3, V2 = 0 ` `2. Transfer from V1 to V2, and fill V1: V1 = 3, V2 = 3 ` `2. Transfer from V1 to V2, and fill V1: V1 = 3, V2 = 6 ` `3. Transfer from V1 to V2, and empty V2: V1 = 2, V2 = 0 ` `4. Transfer from V1 to V2, and fill V1: V1 = 3, V2 = 2 ` `5. Transfer from V1 to V2, and fill V1: V1 = 3, V2 = 5 ` `6. Transfer from V1 to V2, and empty V2: V1 = 1, V2 = 0 ` `7. Stop as V1 now contains 1 litre. ` ` ` `Note that V2 was made empty in steps 3 and 6 because it became full */` ` ` `#include <iostream> ` `using` `namespace` `std; ` ` ` `// A utility function to get GCD of two numbers ` `int` `gcd(` `int` `a, ` `int` `b) { ` `return` `b? gcd(b, a % b) : a; } ` ` ` `// Class to represent a Vessel ` `class` `Vessel ` `{ ` ` ` `// A vessel has capacity, and current amount of water in it ` ` ` `int` `capacity, current; ` `public` `: ` ` ` `// Constructor: initializes capacity as given, and current as 0 ` ` ` `Vessel(` `int` `capacity) { ` `this` `->capacity = capacity; current = 0; } ` ` ` ` ` `// The main function to fill one litre in this vessel. Capacity of V2 ` ` ` `// must be greater than this vessel and two capacities must be co-prime ` ` ` `void` `makeOneLitre(Vessel &V2); ` ` ` ` ` `// Fills vessel with given amount and returns the amount of water ` ` ` `// transferred to it. If the vessel becomes full, then the vessel ` ` ` `// is made empty. ` ` ` `int` `transfer(` `int` `amount); ` `}; ` ` ` `// The main function to fill one litre in this vessel. Capacity ` `// of V2 must be greater than this vessel and two capacities ` `// must be coprime ` `void` `Vessel:: makeOneLitre(Vessel &V2) ` `{ ` ` ` `// solution exists iff a and b are co-prime ` ` ` `if` `(gcd(capacity, V2.capacity) != 1) ` ` ` `return` `; ` ` ` ` ` `while` `(current != 1) ` ` ` `{ ` ` ` `// fill A (smaller vessel) ` ` ` `if` `(current == 0) ` ` ` `current = capacity; ` ` ` ` ` `cout << ` `"Vessel 1: "` `<< current << ` `" Vessel 2: "` ` ` `<< V2.current << endl; ` ` ` ` ` `// Transfer water from V1 to V2 and reduce current of V1 by ` ` ` `// the amount equal to transferred water ` ` ` `current = current - V2.transfer(current); ` ` ` `} ` ` ` ` ` `// Finally, there will be 1 litre in vessel 1 ` ` ` `cout << ` `"Vessel 1: "` `<< current << ` `" Vessel 2: "` ` ` `<< V2.current << endl; ` `} ` ` ` `// Fills vessel with given amount and returns the amount of water ` `// transferred to it. If the vessel becomes full, then the vessel ` `// is made empty ` `int` `Vessel::transfer(` `int` `amount) ` `{ ` ` ` `// If the vessel can accommodate the given amount ` ` ` `if` `(current + amount < capacity) ` ` ` `{ ` ` ` `current += amount; ` ` ` `return` `amount; ` ` ` `} ` ` ` ` ` `// If the vessel cannot accommodate the given amount, then ` ` ` `// store the amount of water transferred ` ` ` `int` `transferred = capacity - current; ` ` ` ` ` `// Since the vessel becomes full, make the vessel ` ` ` `// empty so that it can be filled again ` ` ` `current = 0; ` ` ` ` ` `return` `transferred; ` `} ` ` ` `// Driver program to test above function ` `int` `main() ` `{ ` ` ` `int` `a = 3, b = 7; ` `// a must be smaller than b ` ` ` ` ` `// Create two vessels of capacities a and b ` ` ` `Vessel V1(a), V2(b); ` ` ` ` ` `// Get 1 litre in first vessel ` ` ` `V1.makeOneLitre(V2); ` ` ` ` ` `return` `0; ` `} ` |

*chevron_right*

*filter_none*

## Java

`/* Sample run of the Algo for V1 with capacity 3 and V2 with capacity 7 ` `1. Fill V1: V1 = 3, V2 = 0 ` `2. Transfer from V1 to V2, and fill V1: V1 = 3, V2 = 3 ` `2. Transfer from V1 to V2, and fill V1: V1 = 3, V2 = 6 ` `3. Transfer from V1 to V2, and empty V2: V1 = 2, V2 = 0 ` `4. Transfer from V1 to V2, and fill V1: V1 = 3, V2 = 2 ` `5. Transfer from V1 to V2, and fill V1: V1 = 3, V2 = 5 ` `6. Transfer from V1 to V2, and empty V2: V1 = 1, V2 = 0 ` `7. Stop as V1 now contains 1 litre. ` ` ` `Note that V2 was made empty in steps 3 and 6 because it became full */` ` ` `class` `GFG ` `{ ` ` ` ` ` `// A utility function to get GCD of two numbers ` ` ` `static` `int` `gcd(` `int` `a, ` `int` `b) ` ` ` `{ ` ` ` `return` `b > ` `0` `? gcd(b, a % b) : a; ` ` ` `} ` ` ` ` ` `// Class to represent a Vessel ` ` ` `static` `class` `Vessel ` ` ` `{ ` ` ` ` ` `// A vessel has capacity, and ` ` ` `// current amount of water in it ` ` ` `int` `capacity, current; ` ` ` ` ` `// Constructor: initializes capacity ` ` ` `// as given, and current as 0 ` ` ` `public` `Vessel(` `int` `capacity) ` ` ` `{ ` ` ` `this` `.capacity = capacity; ` ` ` `current = ` `0` `; ` ` ` `} ` ` ` ` ` `// The main function to fill one litre ` ` ` `// in this vessel. Capacity of V2 must be ` ` ` `// greater than this vessel and two capacities ` ` ` `// must be coprime ` ` ` `void` `makeOneLitre(Vessel V2) ` ` ` `{ ` ` ` `// solution exists iff a and b are co-prime ` ` ` `if` `(gcd(capacity, V2.capacity) != ` `1` `) ` ` ` `return` `; ` ` ` ` ` `while` `(current != ` `1` `) ` ` ` `{ ` ` ` `// fill A (smaller vessel) ` ` ` `if` `(current == ` `0` `) ` ` ` `current = capacity; ` ` ` ` ` `System.out.print(` `"Vessel 1: "` `+ current + ` ` ` `" Vessel 2: "` `+ V2.current + ` `"\n"` `); ` ` ` ` ` `// Transfer water from V1 to V2 and ` ` ` `// reduce current of V1 by ` ` ` `// the amount equal to transferred water ` ` ` `current = current - V2.transfer(current); ` ` ` `} ` ` ` ` ` `// Finally, there will be 1 litre in vessel 1 ` ` ` `System.out.print(` `"Vessel 1: "` `+ current + ` ` ` `" Vessel 2: "` `+ V2.current + ` `"\n"` `); ` ` ` `} ` ` ` ` ` `// Fills vessel with given amount and ` ` ` `// returns the amount of water ` ` ` `// transferred to it. If the vessel ` ` ` `// becomes full, then the vessel ` ` ` `// is made empty ` ` ` `int` `transfer(` `int` `amount) ` ` ` `{ ` ` ` `// If the vessel can accommodate the given amount ` ` ` `if` `(current + amount < capacity) ` ` ` `{ ` ` ` `current += amount; ` ` ` `return` `amount; ` ` ` `} ` ` ` ` ` `// If the vessel cannot accommodate ` ` ` `// the given amount, then store ` ` ` `// the amount of water transferred ` ` ` `int` `transferred = capacity - current; ` ` ` ` ` `// Since the vessel becomes full, make the vessel ` ` ` `// empty so that it can be filled again ` ` ` `current = ` `0` `; ` ` ` ` ` `return` `transferred; ` ` ` `} ` ` ` `} ` ` ` ` ` `// Driver program to test above function ` ` ` `public` `static` `void` `main(String[] args) ` ` ` `{ ` ` ` `int` `a = ` `3` `, b = ` `7` `; ` `// a must be smaller than b ` ` ` ` ` `// Create two vessels of capacities a and b ` ` ` `Vessel V1 = ` `new` `Vessel(a); ` ` ` `Vessel V2 = ` `new` `Vessel(b); ` ` ` ` ` `// Get 1 litre in first vessel ` ` ` `V1.makeOneLitre(V2); ` ` ` `} ` `} ` ` ` `// This code is contributed by 29AjayKumar ` |

*chevron_right*

*filter_none*

## C#

`/* Sample run of the Algo for V1 with capacity 3 and V2 with capacity 7 ` `1. Fill V1: V1 = 3, V2 = 0 ` `2. Transfer from V1 to V2, and fill V1: V1 = 3, V2 = 3 ` `2. Transfer from V1 to V2, and fill V1: V1 = 3, V2 = 6 ` `3. Transfer from V1 to V2, and empty V2: V1 = 2, V2 = 0 ` `4. Transfer from V1 to V2, and fill V1: V1 = 3, V2 = 2 ` `5. Transfer from V1 to V2, and fill V1: V1 = 3, V2 = 5 ` `6. Transfer from V1 to V2, and empty V2: V1 = 1, V2 = 0 ` `7. Stop as V1 now contains 1 litre. ` ` ` `Note that V2 was made empty in steps 3 and 6 because it became full */` ` ` `using` `System; ` ` ` `class` `GFG ` `{ ` ` ` ` ` `// A utility function to get GCD of two numbers ` ` ` `static` `int` `gcd(` `int` `a, ` `int` `b) ` ` ` `{ ` ` ` `return` `b > 0 ? gcd(b, a % b) : a; ` ` ` `} ` ` ` ` ` `// Class to represent a Vessel ` ` ` `class` `Vessel ` ` ` `{ ` ` ` ` ` `// A vessel has capacity, and ` ` ` `// current amount of water in it ` ` ` `int` `capacity, current; ` ` ` ` ` `// Constructor: initializes capacity ` ` ` `// as given, and current as 0 ` ` ` `public` `Vessel(` `int` `capacity) ` ` ` `{ ` ` ` `this` `.capacity = capacity; ` ` ` `current = 0; ` ` ` `} ` ` ` ` ` `// The main function to fill one litre ` ` ` `// in this vessel. Capacity of V2 must be ` ` ` `// greater than this vessel and two capacities ` ` ` `// must be coprime ` ` ` `public` `void` `makeOneLitre(Vessel V2) ` ` ` `{ ` ` ` `// solution exists iff a and b are co-prime ` ` ` `if` `(gcd(capacity, V2.capacity) != 1) ` ` ` `return` `; ` ` ` ` ` `while` `(current != 1) ` ` ` `{ ` ` ` `// fill A (smaller vessel) ` ` ` `if` `(current == 0) ` ` ` `current = capacity; ` ` ` ` ` `Console.Write(` `"Vessel 1: "` `+ current + ` ` ` `" Vessel 2: "` `+ V2.current + ` `"\n"` `); ` ` ` ` ` `// Transfer water from V1 to V2 and ` ` ` `// reduce current of V1 by ` ` ` `// the amount equal to transferred water ` ` ` `current = current - V2.transfer(current); ` ` ` `} ` ` ` ` ` `// Finally, there will be 1 litre in vessel 1 ` ` ` `Console.Write(` `"Vessel 1: "` `+ current + ` ` ` `" Vessel 2: "` `+ V2.current + ` `"\n"` `); ` ` ` `} ` ` ` ` ` `// Fills vessel with given amount and ` ` ` `// returns the amount of water ` ` ` `// transferred to it. If the vessel ` ` ` `// becomes full, then the vessel ` ` ` `// is made empty ` ` ` `int` `transfer(` `int` `amount) ` ` ` `{ ` ` ` `// If the vessel can accommodate the given amount ` ` ` `if` `(current + amount < capacity) ` ` ` `{ ` ` ` `current += amount; ` ` ` `return` `amount; ` ` ` `} ` ` ` ` ` `// If the vessel cannot accommodate ` ` ` `// the given amount, then store ` ` ` `// the amount of water transferred ` ` ` `int` `transferred = capacity - current; ` ` ` ` ` `// Since the vessel becomes full, make the vessel ` ` ` `// empty so that it can be filled again ` ` ` `current = 0; ` ` ` ` ` `return` `transferred; ` ` ` `} ` ` ` `} ` ` ` ` ` `// Driver program to test above function ` ` ` `public` `static` `void` `Main(String[] args) ` ` ` `{ ` ` ` `int` `a = 3, b = 7; ` `// a must be smaller than b ` ` ` ` ` `// Create two vessels of capacities a and b ` ` ` `Vessel V1 = ` `new` `Vessel(a); ` ` ` `Vessel V2 = ` `new` `Vessel(b); ` ` ` ` ` `// Get 1 litre in first vessel ` ` ` `V1.makeOneLitre(V2); ` ` ` `} ` `} ` ` ` `// This code is contributed by Rajput-Ji ` |

*chevron_right*

*filter_none*

**Output: **

Vessel 1: 3 Vessel 2: 0 Vessel 1: 3 Vessel 2: 3 Vessel 1: 3 Vessel 2: 6 Vessel 1: 2 Vessel 2: 0 Vessel 1: 3 Vessel 2: 2 Vessel 1: 3 Vessel 2: 5 Vessel 1: 1 Vessel 2: 0

**How does this work?**

To prove that the algorithm works, we need to proof that after certain number of iterations in the while loop, we will get 1 litre in V1.

Let ‘a’ be the capacity of vessel V1 and ‘b’ be the capacity of V2. Since we repeatedly transfer water from V1 to V2 until V2 becomes full, we will have ‘a – b (mod a)’ water in V1 when V2 becomes full first time . Once V2 becomes full, it is emptied. We will have ‘a – 2b (mod a)’ water in V1 when V2 is full second time. We repeat the above steps, and get ‘a – nb (mod a)’ water in V1 after the vessel V2 is filled and emptied ‘n’ times. We need to prove that the value of ‘a – nb (mod a)’ will be 1 for a finite integer ‘n’. To prove this, let us consider the following property of coprime numbers.

For any two coprime integers ‘a’ and ‘b’, the integer ‘b’ has a multiplicative inverse modulo ‘a’. In other words, there exists an integer ‘y’ such that ‘b*y ≡ 1(mod)a’ (See 3rd point here). After ‘(a – 1)*y’ iterations, we will have ‘a – [(a-1)*y*b (mod a)]’ water in V1, the value of this expression is ‘a – [(a – 1) * 1] mod a’ which is 1. So the algorithm converges and we get 1 litre in V1.

This article is compiled by Aashish Barnwal. Please write comments if you find anything incorrect, or you want to share more information about the topic discussed above.

Attention reader! Don’t stop learning now. Get hold of all the important DSA concepts with the **DSA Self Paced Course** at a student-friendly price and become industry ready.

## Recommended Posts:

- Program to check if water tank overflows when n solid balls are dipped in the water tank
- Count of vessels completely filled after a given time
- Sum of series M/1 + (M+P)/2 + (M+2*P)/4 + (M+3*P)/8......up to infinite
- Find minimum moves to reach target on an infinite line
- Minimum steps needed to cover a sequence of points on an infinite grid
- Find the sum of infinite series 1^2.x^0 + 2^2.x^1 + 3^2.x^2 + 4^2.x^3 +.......
- Find if the given number is present in the infinite sequence or not
- Find the count of unvisited indices in an infinite array
- Minimum moves to reach target on a infinite line | Set 2
- Program to find amount of water in a given glass
- Container with Most Water
- Maximize count of empty water bottles from N filled bottles
- Find amount of water wasted after filling the tank
- Find the maximum angle at which we can tilt the bottle without spilling any water
- Minimum sprinklers required to water a rectangular park
- Sub-strings that start and end with one character and have at least one other
- Maximise the sum of two Numbers using at most one swap between them
- GCD of two numbers when one of them can be very large
- Make all elements zero by decreasing any two elements by one at a time
- Given two numbers as strings, find if one is a power of other