Open In App

Waterfall Model – Software Engineering

Last Updated : 21 May, 2024
Like Article

The classical waterfall model is the basic software development life cycle model. It is very simple but idealistic. Earlier this model was very popular but nowadays it is not used. However, it is very important because all the other software development life cycle models are based on the classical waterfall model.

What is the SDLC Waterfall Model?

The waterfall model is a software development model used in the context of large, complex projects, typically in the field of information technology. It is characterized by a structured, sequential approach to project management and software development.

The waterfall model is useful in situations where the project requirements are well-defined and the project goals are clear. It is often used for large-scale projects with long timelines, where there is little room for error and the project stakeholders need to have a high level of confidence in the outcome.

Features of the SDLC Waterfall Model

  1. Sequential Approach: The waterfall model involves a sequential approach to software development, where each phase of the project is completed before moving on to the next one.
  2. Document-Driven: The waterfall model relies heavily on documentation to ensure that the project is well-defined and the project team is working towards a clear set of goals.
  3. Quality Control: The waterfall model places a high emphasis on quality control and testing at each phase of the project, to ensure that the final product meets the requirements and expectations of the stakeholders.
  4. Rigorous Planning: The waterfall model involves a rigorous planning process, where the project scope, timelines, and deliverables are carefully defined and monitored throughout the project lifecycle.

Overall, the waterfall model is used in situations where there is a need for a highly structured and systematic approach to software development. It can be effective in ensuring that large, complex projects are completed on time and within budget, with a high level of quality and customer satisfaction.

Importance of SDLC Waterfall Model

  1. Clarity and Simplicity: The linear form of the Waterfall Model offers a simple and unambiguous foundation for project development.
  2. Clearly Defined Phases: The Waterfall Model’s phases each have unique inputs and outputs, guaranteeing a planned development with obvious checkpoints.
  3. Documentation: A focus on thorough documentation helps with software comprehension, upkeep, and future growth.
  4. Stability in Requirements: Suitable for projects when the requirements are clear and steady, reducing modifications as the project progresses.
  5. Resource Optimization: It encourages effective task-focused work without continuously changing contexts by allocating resources according to project phases.
  6. Relevance for Small Projects: Economical for modest projects with simple specifications and minimal complexity.

Phases of SDLC Waterfall Model – Design

The Waterfall Model is a classical software development methodology that was first introduced by Winston W. Royce in 1970. It is a linear and sequential approach to software development that consists of several phases that must be completed in a specific order.

The Waterfall Model has six phases which are:

1. Requirements: The first phase involves gathering requirements from stakeholders and analyzing them to understand the scope and objectives of the project.

2. Design: Once the requirements are understood, the design phase begins. This involves creating a detailed design document that outlines the software architecture, user interface, and system components.

3. Development: The Development phase include implementation involves coding the software based on the design specifications. This phase also includes unit testing to ensure that each component of the software is working as expected.

4. Testing: In the testing phase, the software is tested as a whole to ensure that it meets the requirements and is free from defects.

5. Deployment: Once the software has been tested and approved, it is deployed to the production environment.

6. Maintenance: The final phase of the Waterfall Model is maintenance, which involves fixing any issues that arise after the software has been deployed and ensuring that it continues to meet the requirements over time. 

The classical waterfall model divides the life cycle into a set of phases. This model considers that one phase can be started after the completion of the previous phase. That is the output of one phase will be the input to the next phase. Thus the development process can be considered as a sequential flow in the waterfall. Here the phases do not overlap with each other. The different sequential phases of the classical waterfall model are shown in the below figure.


Waterfall Model-Software Engineering

Let us now learn about each of these phases in detail which include further phases.

1. Feasibility Study:

The main goal of this phase is to determine whether it would be financially and technically feasible to develop the software. 
The feasibility study involves understanding the problem and then determining the various possible strategies to solve the problem. These different identified solutions are analyzed based on their benefits and drawbacks, The best solution is chosen and all the other phases are carried out as per this solution strategy. 

2. Requirements Analysis and Specification:

The requirement analysis and specification phase aims to understand the exact requirements of the customer and document them properly. This phase consists of two different activities. 

  • Requirement gathering and analysis: Firstly all the requirements regarding the software are gathered from the customer and then the gathered requirements are analyzed. The goal of the analysis part is to remove incompleteness (an incomplete requirement is one in which some parts of the actual requirements have been omitted) and inconsistencies (an inconsistent requirement is one in which some part of the requirement contradicts some other part).
  • Requirement specification: These analyzed requirements are documented in a software requirement specification (SRS) document. SRS document serves as a contract between the development team and customers. Any future dispute between the customers and the developers can be settled by examining the SRS document.

3. Design:

The goal of this phase is to convert the requirements acquired in the SRS into a format that can be coded in a programming language. It includes high-level and detailed design as well as the overall software architecture. A Software Design Document is used to document all of this effort (SDD).

4. Coding and Unit Testing:

In the coding phase software design is translated into source code using any suitable programming language. Thus each designed module is coded. The unit testing phase aims to check whether each module is working properly or not. 

5. Integration and System testing:

Integration of different modules is undertaken soon after they have been coded and unit tested. Integration of various modules is carried out incrementally over several steps. During each integration step, previously planned modules are added to the partially integrated system and the resultant system is tested. Finally, after all the modules have been successfully integrated and tested, the full working system is obtained and system testing is carried out on this. 
System testing consists of three different kinds of testing activities as described below.

  • Alpha testing: Alpha testing is the system testing performed by the development team.
  • Beta testing: Beta testing is the system testing performed by a friendly set of customers.
  • Acceptance testing: After the software has been delivered, the customer performs acceptance testing to determine whether to accept the delivered software or reject it.

6. Maintenance:

Maintenance is the most important phase of a software life cycle. The effort spent on maintenance is 60% of the total effort spent to develop a full software. There are three types of maintenance.

  • Corrective Maintenance: This type of maintenance is carried out to correct errors that were not discovered during the product development phase.
  • Perfective Maintenance: This type of maintenance is carried out to enhance the functionalities of the system based on the customer’s request.
  • Adaptive Maintenance: Adaptive maintenance is usually required for porting the software to work in a new environment such as working on a new computer platform or with a new operating system.

Advantages of the SDLC Waterfall Model

The classical waterfall model is an idealistic model for software development. It is very simple, so it can be considered the basis for other software development life cycle models. Below are some of the major advantages of this SDLC model.

  • Easy to Understand: The Classical Waterfall Model is very simple and easy to understand.
  • Individual Processing: Phases in the Classical Waterfall model are processed one at a time.
  • Properly Defined: In the classical waterfall model, each stage in the model is clearly defined.
  • Clear Milestones: The classical Waterfall model has very clear and well-understood milestones.
  • Properly Documented: Processes, actions, and results are very well documented.
  • Reinforces Good Habits: The Classical Waterfall Model reinforces good habits like define-before-design and design-before-code.
  • Working: Classical Waterfall Model works well for smaller projects and projects where requirements are well understood.

Disadvantages of the SDLC Waterfall Model

The Classical Waterfall Model suffers from various shortcomings we can’t use it in real projects, but we use other software development lifecycle models which are based on the classical waterfall model. Below are some major drawbacks of this model.

  • No Feedback Path: In the classical waterfall model evolution of software from one phase to another phase is like a waterfall. It assumes that no error is ever committed by developers during any phase. Therefore, it does not incorporate any mechanism for error correction. 
  • Difficult to accommodate Change Requests: This model assumes that all the customer requirements can be completely and correctly defined at the beginning of the project, but the customer’s requirements keep on changing with time. It is difficult to accommodate any change requests after the requirements specification phase is complete. 
  • No Overlapping of Phases: This model recommends that a new phase can start only after the completion of the previous phase. But in real projects, this can’t be maintained. To increase efficiency and reduce cost, phases may overlap. 
  • Limited Flexibility: The Waterfall Model is a rigid and linear approach to software development, which means that it is not well-suited for projects with changing or uncertain requirements. Once a phase has been completed, it is difficult to make changes or go back to a previous phase.
  • Limited Stakeholder Involvement: The Waterfall Model is a structured and sequential approach, which means that stakeholders are typically involved in the early phases of the project (requirements gathering and analysis) but may not be involved in the later phases (implementation, testing, and deployment).
  • Late Defect Detection: In the Waterfall Model, testing is typically done toward the end of the development process. This means that defects may not be discovered until late in the development process, which can be expensive and time-consuming to fix.
  • Lengthy Development Cycle: The Waterfall Model can result in a lengthy development cycle, as each phase must be completed before moving on to the next. This can result in delays and increased costs if requirements change or new issues arise.

When to Use the SDLC Waterfall Model?

Here are some cases where the use of the Waterfall Model is best suited:

  • Well-understood Requirements: Before beginning development, there are precise, reliable, and thoroughly documented requirements available.
  • Very Little Changes Expected: During development, very little adjustments or expansions to the project’s scope are anticipated.
  • Small to Medium-Sized Projects: Ideal for more manageable projects with a clear development path and little complexity.
  • Predictable: Projects that are predictable, low-risk, and able to be addressed early in the development life cycle are those that have known, controllable risks.
  • Regulatory Compliance is Critical: Circumstances in which paperwork is of utmost importance and stringent regulatory compliance is required.
  • Client Prefers a Linear and Sequential Approach: This situation describes the client’s preference for a linear and sequential approach to project development.
  • Limited Resources: Projects with limited resources can benefit from a set-up strategy, which enables targeted resource allocation.

The Waterfall approach involves little client engagement in the product development process. The product can only be shown to end consumers when it is ready.

Applications of SDLC Waterfall Model

  • Large-scale Software Development Projects: The Waterfall Model is often used for large-scale software development projects, where a structured and sequential approach is necessary to ensure that the project is completed on time and within budget.
  • Safety-Critical Systems: The Waterfall Model is often used in the development of safety-critical systems, such as aerospace or medical systems, where the consequences of errors or defects can be severe.
  • Government and Defense Projects: The Waterfall Model is also commonly used in government and defense projects, where a rigorous and structured approach is necessary to ensure that the project meets all requirements and is delivered on time.
  • Projects with well-defined Requirements: The Waterfall Model is best suited for projects with well-defined requirements, as the sequential nature of the model requires a clear understanding of the project objectives and scope.
  • Projects with Stable Requirements: The Waterfall Model is also well-suited for projects with stable requirements, as the linear nature of the model does not allow for changes to be made once a phase has been completed.

For more, you can refer to the Uses of Waterfall Model.


The Waterfall Model has greatly influenced conventional software development processes. This methodical, sequential technique provides an easily understood and applied structured framework. Project teams have a clear roadmap due to the model’s methodical evolution through the phases of requirements, design, implementation, testing, deployment, and maintenance.

Frequently Asked Questions on Waterfall Model (SDLC) – FAQs

1. What is the difference between the Waterfall Model and Agile Model?

Ans: The main difference between the Waterfall Model and the Agile Model is that the Waterfall model relies on thorough front planning whereas the Agile model is more flexible as it takes these processes in repeating cycles.

2. What is the Waterfall Process?

Ans: The Waterfall process is a step-by-step development and project management process. As the name suggests, this model follows a straight path where each step (like planning, designing, building, testing, and launching) needs to be finished before moving to the next. This approach works well for projects where all the steps are clear from the beginning.

3. What are the benefits of the Waterfall Model?

Ans: The waterfall Model has several benefits as it helps projects keep a well-defined, predictable project under the budget.

4. Is Waterfall better than Agile?

Ans: Waterfall works best for well-defined, unchanging projects, while Agile is for dynamic, evolving projects. For more differences, refer – Waterfall vs Agile.

Related Articles:

For more Software Engineering Models, you can refer to:

Previous Article
Next Article

Similar Reads

Failure of Waterfall model - Software Engineering
This article focuses on discussing various reasons for the failure of the waterfall model. What is the Waterfall Model?The Waterfall Model is also known as the traditional waterfall software life cycle model. It is very simple to understand and use. In the waterfall model, each phase must be completed before the next phase can begin and there is no
3 min read
Iterative Waterfall Model - Software Engineering
In a practical software development project, the classical waterfall model is hard to use. So, the iterative waterfall model can be thought of as incorporating the necessary changes to the classical waterfall model to make it usable in practical software development projects. It is almost the same as the classical waterfall model, except some chang
8 min read
Difference between Waterfall model and Incremental model
Waterfall Model is also known as Classical/Traditional Model. Sometimes It is referred as linear-sequential life cycle model because all phases involve in this model completed one by one in linear fashion. In this model, we get software after completion of all coding phase. This model is basically used for small projects. There exist only one cycle
3 min read
Difference between Waterfall model and Prototype model
Comparison of the waterfall model with the prototype model. Many people today think that both of these strategies are obsolete and should be sent to history's trash. This is untrue, though, because there are still instances in which one strategy is more practical and appropriate than another. Having a clear understanding of the variations between t
5 min read
Difference between RAD Model and Waterfall Model
The waterfall model is a linearly sequential life cycle model of software development in which software testing is carried out after all coding steps have been completed. This is the most fundamental distinction between the waterfall model and the RAD model. Rapid Application Development (RAD), on the other hand, uses an incremental approach to sof
4 min read
Why Spiral Model is Better than Waterfall Model?
The spiral model is mainly used in the development processes of complex projects while the Waterfall model is used for simple projects. Both of these models are selected as per the characteristics of the project. The risks during the project are handled by using the Spiral model and it may be considered better than the waterfall model. Also, we wil
5 min read
Difference between V-model and Waterfall model
In the software business, the Waterfall model and the V-Model are both highly popular development approaches. Both of these paradigms provide systematic assistance for the creation of apps. The primary distinction between the V-Model and the Waterfall Model is that the V-Model identifies flaws during the testing phase, whereas the Waterfall Model i
5 min read
Difference between Waterfall Model and Spiral Model
The waterfall model and Spiral model are used in software development. Waterfall model is also known as the classical or linear model because it follows sequential stages while the spiral model does not follow the sequential stages it follows the evolutionary way. The amount of risk in the waterfall model is more as compared to the spiral model bec
3 min read
Pham-Nordmann-Zhang Model (PNZ model) - Software Engineering
Pham Nordmann Zhang (PNZ) model is used to evaluate the reliability prediction of a component-based system or software and fault tolerance structures techniques.PNZ is considered to be one of the best models, which is based on the nonhomogeneous Poisson process(NHPP). Our goal is to produce a reliability prediction tool using PNZ models based on re
7 min read
When should you use Waterfall Model
The Waterfall Model is the earliest SDLC approach that was used for software development. This model is an example of a sequential model. So it is also referred to as a linear sequential life cycle model. The waterfall model is very simple to understand and use. In a waterfall model, each phase must be completed before the next phase can begin. Als
2 min read
Article Tags :