How to Use VPN in Linux?

Quick Preview to Use VPN on Linux

Here is a quick solution for our active and speedy learners. Follow these steps to use VPN in Linux.

• Using Third-Party Service Provider:

1. Open Linux Terminal & execute command sudo apt-get install openvpn
2. Download Configuration Files Free of Cost from the Web Site.
3. Execute the command sudo openvpn –config under the installed directory.
4. Run the command sudo openvpn to start the service.

• Using Network Manager:

1. On Linux Terminal, execute the command sudo add-apt-repository universe
2. Install VPN using the command sudo add-get install network-manager-openvpn
3. Use VPN using the command sudo service network-manager restart

While surfing the internet, we often come across some web pages that are blocked for the country or the location from where we are searching. Also, you might access some websites where you don’t want to disclose the IP Address Identity to the network. In such cases, we should Use a VPN on Linux to protect the identity.

Execute VPN Linux has no different way to execute. To Operate VPN on Linux, the simple way to enable the VPN IP Address on the device. If you search your IP Address on Internet, you will find the Normal IP Address is different from the VPN IP Address. There are many third-party service providers present to Use VPN on Linux.

This article is intended to discuss a handful of methods to Use VPN on Linux operating system without having any networking issues.

Quick Highlights on VPN on Linux:

• The VPN stands for the Virtual Private Network.
• The VPN works as a secure tunnel between two or more computers connected to the internet.
• VPNs are created by maintaining security as the top priority.
• The VPN is used to protect online privacy.
• The VPN can share different IP Addresses at different times.
• The VPN makes it hard to locate the IP Address as it gets changed over time.

If you want to know more about the Virtual Private Network & its working process, check the article What is VPN & How It Works?

How to Use VPN on Linux?

To Execute VPN on Linux, the following guidelines can be used. We will start with the Downloading Configuration Files over Linux method.

Method 1: Use VPN on Linux using the Service Provider

Step 1: Open the Linux Terminal & execute the following command. It will install the Service Provider on the device without configuration files.

sudo apt-get install openvpn

Step 2: Now, the Configuration Files should be downloaded to use the service. For that purpose, you can use a Different Website to download the files. Click on the Linux option to get it.

Step 3: Now, under the Download Section, execute the following command to Config all the downloaded files.

udo openvpn --config

Step 4: At last, execute the command to enable the VPN Service on Linux & use it.

sudo openvpn

Method 2: Use VPN on Linux using Network Manager

Step 1: On the Terminal, execute the following Linux Command to add the repository for the Network Manager.

sudo add-apt-repository universe

Step 2: Now, it is time to download Network Manager along with the VPN. For that purpose, the following command will be used.

sudo add-get install network-manager-openvpn

Step 3: Now, if you Restart the VPN, it will be ready to use. For that case, the following command will be executed.

sudo service network-manager restart

As we can see the Configuration of VPN on Linux is not a challenging task. Using these couple of methods, you can use VPN on Linux for free without having any issues. When the VPN starts, the IP Address of the device will get changed in a particular time frame.

Frequently Asked Questions to Use VPN on Linux

How can I Use a VPN on Linux?

To use a VPN on Linux, the following steps should be executed with proper concentration.

1. Open Linux Terminal.
2. Execute the command sudo add-apt-repository universe.
3. Run the command sudo add-get install network-manager-openvpn
4. At last, the command sudo service network-manager restart will be executed.

Does VPN Come on Linux free of cost?

No! In most of the cases, a VPN Service is not available free of cost for the Linux distributions. However, there are a few tricks that can be used to get it free of cost. Also, some service provider provides free access to the service for a certain period.

How do I know that my VPN is activated on Linux?

When your VPN is activated, search for My IP Address on any favorite browser. From there you can check the IP Address. Now, after some time if you further check, you will find it is changed. Along with that, the location of the IP Address will be different from where you are currently operating.