Flip-flop is a basic digital memory circuit, which stores one bit of information.Flip flops are the fundamental blocks of most sequential circuits. It is also known as a bistable multivibrator or a binary or one-bit memory. Flip-flops are used as memory elements in sequential circuit.
The output is obtained in a sequential circuit from combinational circuit or flip-flop or both. The state of flip-flop changes at active state of clock pulses and remains unaffected when the clock pulse is not active. In particular, clocked flip flops serve as memory elements in synchronous sequential Circuits and unclocked flip-flops (i.e., latches) serve as memory elements in asynchronous sequential circuits.
Latch is an electronic device, which changes its output immediately based on the applied input. It is used to store either 1 or 0 at any specified time. It consists of two inputs namely “SET” and RESET and two outputs, which are complement to each other.
Difference between Flip-flop and Latch :
|1||Flip-flop is a bistable device i.e., it has two stable states that are represented as 0 and 1.||Latch is also a bistable device whose states are also represented as 0 and 1.|
|2||It checks the inputs but changes the output only at times defined by the clock signal or any other control signal.||It checks the inputs continuously and responds to the changes in inputs immediately.|
|3||It is a edge triggered device.||It is a level triggered device.|
|4||Gates like NOR, NOT, AND, NAND are building blocks of flip flops.||These are also made up of gates.|
|5||They are classified into asynchronous or synchronous flipflops.||There is no such classification in latches.|
|6||It forms the building blocks of many sequential circuits like counters.||These can be used for the designing of sequential circuits but are not generally preferred.|
|7||a, Flip-flop always have a clock signal||latche doesn’t have a clock signal|
|8||Flip-flop can be build from Latches||Latches can’t build from gates|
|9||ex:D Flip-flop, JK Flip-flop||ex:SR Latch, D Latch|
Don’t stop now and take your learning to the next level. Learn all the important concepts of Data Structures and Algorithms with the help of the most trusted course: DSA Self Paced. Become industry ready at a student-friendly price.
- Difference between 4NF and 5NF
- Difference between RAM and ROM
- Difference between T-SQL and PL-SQL
- Difference between TCP and RTP
- Difference Between Blu-Ray and DVD
- Difference between LAN, MAN and WAN
- Difference between CD-R and CD-RW
- Difference between E-paper and LCD
- Difference between Router and Hub
- Difference between From and Where Clause in SQL
- Difference between AES and DES ciphers
- Difference between FTP and TFTP
- Difference between EIGRP and BGP
- Difference between LAN and VLAN
- Difference between Hub and Switch
- Difference between 1NF and 2NF in DBMS
- Difference between OSPF and BGP
- Difference between MD5 and SHA1
- Difference between DNS and DHCP
- Difference between ARP and RARP
If you like GeeksforGeeks and would like to contribute, you can also write an article using contribute.geeksforgeeks.org or mail your article to firstname.lastname@example.org. See your article appearing on the GeeksforGeeks main page and help other Geeks.
Please Improve this article if you find anything incorrect by clicking on the "Improve Article" button below.