Open In App

Conversion of S-R Flip-Flop into T Flip-Flop

Last Updated : 22 Apr, 2020
Improve
Improve
Like Article
Like
Save
Share
Report

Prerequisite – Flip-flop
Here, we will discuss the process of conversion of S-R Flip-Flop into a T Flip-Flop using an example.

Rules for conversion:

  • Step-1:
    Find the characteristics table of required flip-flop and the excitation table of the existing (given) flip-flop.
  • Step-2:
    Find the expression of given flip-flop in terms of required flip-flop using K-map.
  • Step-3:
    Find the circuit diagram of required flip-flop.

S-R Flip-Flop to T Flip-Flop:
Following is the characteristics table of T flip-flop and excitation table of S-R flip-flop.

Now, using K-map we get the expression for of S & R in terms of T.

S = TQn’ & R = TQn

Therefore, the circuit diagram for conversion of S-R flip-flop into T flip-flop is:


Previous Article
Next Article

Similar Reads

Conversion of J-K Flip-Flop into T Flip-Flop
Prerequisite - Flip-flop 1. J-K Flip-Flop: JK flip-flop shares the initials of Jack Kilby, who won a Nobel prize for his fabrication of the world's first integrated circuit, some people speculate that this type of flip flop was named after him because a flip-flop was the first device that Kilby build when he was developing integrated circuits. J-K
1 min read
Conversion of J-K Flip-Flop into D Flip-Flop
Prerequisite - Flip-flop 1. JK Flip-Flop: JK Flip-Flip is basically a gated SR flip-flop which has an additional input that is clock input. It prevents the invalid output that may be obtained when both the inputs are 1. 2. D Flip-Flop: D Flip-Flop is a modified SR flip-flop which has an additional inverter. It prevents the inputs from becoming the
1 min read
Conversion of S-R Flip-Flop into D Flip-Flop
Prerequisite - Flip-flop 1. S-R Flip-Flop : S-R flip-flop is similar to S-R latch expect clock signal and two AND gates. The circuit responds to the positive edge of clock pulse to the inputs S and R. 2. D Flip-Flop : D Flip-Flop is a modified SR flip-flop which has an additional inverter. It prevents the inputs from becoming the same value. Conver
1 min read
JK Flip Flop and SR Flip Flop
Flip-Flop is popularly known as the basic digital memory circuit. It has two states as logic 1(High) and logic 0(low) states. A flip flop is a sequential circuit which consists of a single binary state of information or data. The digital circuit is a flip flop which has two outputs and are of opposite states. It is also known as a Bistable Multivib
3 min read
Flip-Flop types, their Conversion and Applications
In this article, we will go through the Flip-Flop types, their Conversion and their Applications, First, we will go through the definition of the flip-flop with its types in brief, and then we will go through the conversion of the flip-flop with its applications, At last, we will conclude our article with some FAQs. Table of Content Flip-FlopTypes
7 min read
Master-Slave JK Flip Flop
Prerequisite - Flip-flop types and their Conversion Race Around Condition In JK Flip-flop - For J-K flip-flop, if J=K=1, and if clk=1 for a long period of time, then Q output will toggle as long as CLK is high, which makes the output of the flip-flop unstable or uncertain. This problem is called race around condition in J-K flip-flop. This problem
3 min read
D Flip Flop
Prerequisite : Introduction to Sequential Circuit Flip Flop is an electronic device or to be precise a kind of memory component that can hold one bit of data. A flip flop has two states, that is "SET" and "RESET". Those states are represented with the binary values 0 and 1. The flip flop remains in its current state until its receives a signal that
5 min read
Mod 6 Johnson Counter (with D flip-flop)
Johnson counters are one of the most important applications of shift registers. They are created by connecting multiple flip-flops to one another (such that the output of one flip-flop is the input for another), and by connecting the complement of the output of the last flip-flop to the input of the first flip-flop. For a mod 6 Johnson counter, 3 f
1 min read
Mod 2 Ring Counter (with D flip-flop)
Ring counters are one of the most important applications of shift registers. They are created by connecting multiple flip-flops to one another (such that the output of one flip-flop is the input for another), and by connecting the output of the last flip-flop to the input of the first flip-flop. For a mod 2-ring counter, two flip-flops will be requ
1 min read
What is JK Flip-Flop ?
In Digital Electronics and communication science, flip-flops are widely used for handling binary information. These fundamental building blocks are used to store and manipulate information as per our needs. From the Flipflop family, Jack Kilby flip-flop(JK Flipflop) is very prominent as it is very versatile and can be used as a basic memory element
4 min read
Article Tags :