Open In App

Difference between Star topology and Bus topology

Last Updated : 16 May, 2023
Like Article

Prerequisite – Types of Network Topology 

1. Star Topology : 
Star topology is used for Local Area networks in which all nodes are connected to a central point called Hub, which connects them to the communication channel. The connections are in such a manner that n number of wires are required to connect n number of end devices or nodes. Traffic is generated from the central hub of the star. The central hub controls communication between all the nodes, message sent by one node reaches the hub first, and then it is transmitted to the receiver node through the hub. 


2. Bus Topology : 
Bus topology is a type of network topology in which all the devices are connected to a single cable which is called the backbone of the network. It consists of a terminator at each end of the cable. The network cable is responsible for the communication between the devices and when the data reaches the end of the cable it is removed by the terminator from the data line. It is the easiest network topology when the devices are to be connected linearly. 


Similarities  between Star Topology and Bus Topology:

  • Network Devices: Both Star topology and Bus topology can accommodate various network devices such as computers, printers, routers, switches, or any other network-enabled devices.
  • Communication: Both network topologies provide a communication medium that enables devices to communicate with each other.
  • Data Transmission: Both network topologies transmit data between network-enabled devices, although they use different methods of data transmission.
  • Network Maintenance: In both network topologies, network maintenance is required to ensure that the network is operating optimally.
  • Network Performance: In both network topologies, network performance can be impacted by factors such as network congestion, network security, and network speed.
  • Network Security: Both network topologies can implement security measures to protect the network and the data transmitted over it.
  • Network Standards: Both network topologies conform to established network standards, such as Ethernet or Wi-Fi.

    Differences between Star Topology and Bus Topology: 

S.NO. Star Topology Bus Topology
1. Star topology is a topology in which all devices are connected to a central hub. Bus topology is a topology where each device is connected to a single cable which is known as the backbone.
2. In star topology, if the central hub fails then the whole network fails. In a Bus topology, the failure of the network cable will cause the whole network to fail.
3. In star topology, there is a non-linear arrangement of nodes in a network. In a bus topology, there is a linear arrangement of nodes in a network.
4. Management of high traffic and performance of the network is highly dependent on the capacity of the central hub. Bus topology can not effectively manage a terminator’s high amount of traffic as if there is high traffic then the performance of the network is affected.
5. Star topology does not have any terminator. Bus topology has a terminators at both ends of the network.
6. Star topology has a high implementation cost because of the central hub and extra wires required for connection. Bus topology is less expensive than a star topology.
7. Data transmission is faster in a star topology. In a Bus topology, the data is transmitted slower as compared to a star topology.
8. In star topology the communication between nodes is done through a central hub, a message from the sender node reaches the central hub first then it is transmitted to the receiver node. In a Bus topology, the data from a sender device to a receiver device is sent directly.
9. Expansion is easier. Expansion of network i.e. addition of new node is difficult.
10. Fault identification and isolation are relatively easier. Fault identification and isolation are not easier.
11. Chances of data collision are less, Data collisions occur frequently
12. The signal transmission is not unidirectional. The signal transmission is  unidirectional.
13. Less chances of data collision in star topology. High chances of data collision in bus topology.


  • Star topology is frequently used in high-speed LANs.
  • Homes and workplaces frequently employ star topologies.


  • Ethernet networks 
  • The bus topology can be used for the further incorporate I/O devices like printers, scanners or others in a network at home/workplace.

Conclusion :

both Star and Bus Topology networks have their advantages and disadvantages, and the choice between them depends on the specific networking requirements. A Star Topology network is scalable and reliable but can be expensive, while a Bus Topology network is inexpensive but can be difficult to maintain and troubleshoot. Understanding the differences between the two network topologies can help in choosing the right one for a specific networking requirement.


Like Article
Suggest improvement
Share your thoughts in the comments

Similar Reads