In this article, we will discuss Time-Space Trade-Off in Algorithms. A tradeoff is a situation where one thing increases and another thing decreases. It is a way to solve a problem in:

• Either in less time and by using more space, or
• In very little space by spending a long amount of time.

The best Algorithm is that which helps to solve a problem that requires less space in memory and also takes less time to generate the output. But in general, it is not always possible to achieve both of these conditions at the same time. The most common condition is an algorithm using a lookup table. This means that the answers to some questions for every possible value can be written down. One way of solving this problem is to write down the entire lookup table, which will let you find answers very quickly but will use a lot of space. Another way is to calculate the answers without writing down anything, which uses very little space, but might take a long time. Therefore, the more time-efficient algorithms you have, that would be less space-efficient.

• Compressed or Uncompressed data
• Re Rendering or Stored images
• Smaller code or loop unrolling
• Lookup tables or Recalculation

Compressed or Uncompressed data: A space-time trade-off can be applied to the problem of data storage. If data stored is uncompressed, it takes more space but less time. But if the data is stored compressed, it takes less space but more time to run the decompression algorithm. There are many instances where it is possible to directly work with compressed data. In that case of compressed bitmap indices, where it is faster to work with compression than without compression.

Re-Rendering or Stored images: In this case, storing only the source and rendering it as an image would take more space but less time i.e., storing an image in the cache is faster than re-rendering but requires more space in memory.

Smaller code or Loop Unrolling: Smaller code occupies less space in memory but it requires high computation time that is required for jumping back to the beginning of the loop at the end of each iteration. Loop unrolling can optimize execution speed at the cost of increased binary size. It occupies more space in memory but requires less computation time.

Lookup tables or Recalculation: In a lookup table, an implementation can include the entire table which reduces computing time but increases the amount of memory needed. It can recalculate i.e., compute table entries as needed, increasing computing time but reducing memory requirements.

For Example: In mathematical terms, the sequence Fn of the Fibonacci Numbers is defined by the recurrence relation:

Fn = Fn – 1 + Fn – 2
where, F0 = 0 and F1 = 1.

A simple solution to find the Nth Fibonacci term using recursion from the above recurrence relation.

Below is the implementation using recursion:

## C++

 `// C++ program to find Nth Fibonacci``// number using recursion``#include ``using` `namespace` `std;` `// Function to find Nth Fibonacci term``int` `Fibonacci(``int` `N)``{``    ``// Base Case``    ``if` `(N < 2)``        ``return` `N;` `    ``// Recursively computing the term``    ``// using recurrence relation``    ``return` `Fibonacci(N - 1) + Fibonacci(N - 2);``}` `// Driver Code``int` `main()``{``    ``int` `N = 5;` `    ``// Function Call``    ``cout << Fibonacci(N);` `    ``return` `0;``}`

## Java

 `// Java program to find Nth Fibonacci``// number using recursion``class` `GFG {` `    ``// Function to find Nth Fibonacci term``    ``static` `int` `Fibonacci(``int` `N)``    ``{``        ``// Base Case``        ``if` `(N < ``2``)``            ``return` `N;` `        ``// Recursively computing the term``        ``// using recurrence relation``        ``return` `Fibonacci(N - ``1``) + Fibonacci(N - ``2``);``    ``}` `    ``// Driver Code``    ``public` `static` `void` `main(String[] args)``    ``{``        ``int` `N = ``5``;` `        ``// Function Call``        ``System.out.print(Fibonacci(N));``    ``}``}` `// This code is contributed by rutvik_56.`

## Python3

 `# Python3 program to find Nth Fibonacci``# number using recursion`  `# Function to find Nth Fibonacci term``def` `Fibonacci(N:``int``):``    ``# Base Case``    ``if` `(N < ``2``):``        ``return` `N` `    ``# Recursively computing the term``    ``# using recurrence relation``    ``return` `Fibonacci(N ``-` `1``) ``+` `Fibonacci(N ``-` `2``)`  `# Driver Code``if` `__name__ ``=``=` `'__main__'``:``    ``N ``=` `5` `    ``# Function Call``    ``print``(Fibonacci(N))`

## C#

 `// C# program to find Nth Fibonacci``// number using recursion``using` `System;``class` `GFG``{` `  ``// Function to find Nth Fibonacci term``  ``static` `int` `Fibonacci(``int` `N)``  ``{` `    ``// Base Case``    ``if` `(N < 2)``      ``return` `N;` `    ``// Recursively computing the term``    ``// using recurrence relation``    ``return` `Fibonacci(N - 1) + Fibonacci(N - 2);``  ``}` `  ``// Driver Code``  ``public` `static` `void` `Main(``string``[] args)``  ``{``    ``int` `N = 5;` `    ``// Function Call``    ``Console.Write(Fibonacci(N));``  ``}``}` `// This code is contributed by pratham76.`

## Javascript

 `// Javascript program to find Nth Fibonacci``// number using recursion` `// Function to find Nth Fibonacci term``function` `Fibonacci(N)``{``    ``// Base Case``    ``if` `(N < 2)``        ``return` `N;` `    ``// Recursively computing the term``    ``// using recurrence relation``    ``return` `Fibonacci(N - 1) + Fibonacci(N - 2);``}` `// Driver Code``    ``let N = 5;` `    ``// Function Call``    ``console.log(Fibonacci(N));``    ` `// This code is contributed by Utkarsh`

Output
```5
```

Time Complexity: O(2N)
Auxiliary Space: O(1)

Explanation: The time complexity of the above implementation is exponential due to multiple calculations of the same subproblems again and again. The auxiliary space used is minimum. But our goal is to reduce the time complexity of the approach even it requires extra space. Below is the Optimized approach discussed.

Efficient Approach: To optimize the above approach, the idea is to use Dynamic Programming to reduce the complexity by memoization of the overlapping subproblems as shown in the below recursion tree:

Below is the implementation of the above approach:

## C++

 `// C++ program to find Nth Fibonacci``// number using recursion``#include ``using` `namespace` `std;` `// Function to find Nth Fibonacci term``int` `Fibonacci(``int` `N)``{``    ``int` `f[N + 2];``    ``int` `i;` `    ``// 0th and 1st number of the``    ``// series are 0 and 1``    ``f[0] = 0;``    ``f[1] = 1;` `    ``// Iterate over the range [2, N]``    ``for` `(i = 2; i <= N; i++) {` `        ``// Add the previous 2 numbers``        ``// in the series and store it``        ``f[i] = f[i - 1] + f[i - 2];``    ``}` `    ``// Return Nth Fibonacci Number``    ``return` `f[N];``}` `// Driver Code``int` `main()``{``    ``int` `N = 5;` `    ``// Function Call``    ``cout << Fibonacci(N);` `    ``return` `0;``}`

## Java

 `// Java program to find Nth Fibonacci``// number using recursion``import` `java.io.*;` `class` `GFG {` `// Function to find Nth Fibonacci term``static` `int` `Fibonacci(``int` `N)``{``    ``int``[] f= ``new` `int``[N + ``2``];``    ``int` `i;` `    ``// 0th and 1st number of the``    ``// series are 0 and 1``    ``f[``0``] = ``0``;``    ``f[``1``] = ``1``;` `    ``// Iterate over the range [2, N]``    ``for` `(i = ``2``; i <= N; i++) {` `        ``// Add the previous 2 numbers``        ``// in the series and store it``        ``f[i] = f[i - ``1``] + f[i - ``2``];``    ``}` `    ``// Return Nth Fibonacci Number``    ``return` `f[N];``}` `// Driver Code``public` `static` `void` `main (String[] args)``{``    ``int` `N = ``5``;` `    ``// Function Call``    ``System.out.println(Fibonacci(N));` `}``}` `// This code is submitted by Pushpesh Raj`

## Python3

 `# Python3 program to find Nth Fibonacci``# number using recursion` `# Function to find Nth Fibonacci term``def` `Fibonacci(N):``    ``f``=``[``0``]``*``(N ``+` `2``)` `    ``# 0th and 1st number of the``    ``# series are 0 and 1``    ``f[``0``] ``=` `0``    ``f[``1``] ``=` `1` `    ``# Iterate over the range [2, N]``    ``for` `i ``in` `range``(``2``,N``+``1``) :` `        ``# Add the previous 2 numbers``        ``# in the series and store it``        ``f[i] ``=` `f[i ``-` `1``] ``+` `f[i ``-` `2``]``    `  `    ``# Return Nth Fibonacci Number``    ``return` `f[N]`  `# Driver Code``if` `__name__ ``=``=` `'__main__'``:``    ``N ``=` `5` `    ``# Function Call``    ``print``(Fibonacci(N))`

## C#

 `// C# program to find Nth Fibonacci``// number using recursion``using` `System;` `class` `GFG {` `// Function to find Nth Fibonacci term``static` `int` `Fibonacci(``int` `N)``{``    ``int``[] f= ``new` `int``[N + 2];``    ``int` `i;` `    ``// 0th and 1st number of the``    ``// series are 0 and 1``    ``f[0] = 0;``    ``f[1] = 1;` `    ``// Iterate over the range [2, N]``    ``for` `(i = 2; i <= N; i++) {` `        ``// Add the previous 2 numbers``        ``// in the series and store it``        ``f[i] = f[i - 1] + f[i - 2];``    ``}` `    ``// Return Nth Fibonacci Number``    ``return` `f[N];``}` `// Driver Code``public` `static` `void` `Main()``{``    ``int` `N = 5;` `    ``// Function Call``    ``Console.Write(Fibonacci(N));` `}``}` `// This code is contributed by Aman Kumar`

## Javascript

 `// Function to find Nth Fibonacci term``function` `fibonacci(N) {``  ``const f = ``new` `Array(N + 2).fill(0);` `  ``// 0th and 1st number of the``  ``// series are 0 and 1``  ``f[0] = 0;``  ``f[1] = 1;` `  ``// Iterate over the range [2, N]``  ``for` `(let i = 2; i <= N; i++) {``    ``// Add the previous 2 numbers``    ``// in the series and store it``    ``f[i] = f[i - 1] + f[i - 2];``  ``}` `  ``// Return Nth Fibonacci Number``  ``return` `f[N];``}` `// Driver Code``const N = 5;` `// Function Call``console.log(fibonacci(N));`

Output
```5
```

Time Complexity: O(N)
Auxiliary Space: O(N)

Explanation: The time complexity of the above implementation is linear by using an auxiliary space for storing the overlapping subproblems states so that it can be used further when required.

Previous
Next