Skip to content
Related Articles

Related Articles

Data Types in C

Improve Article
Save Article
  • Difficulty Level : Easy
  • Last Updated : 09 Sep, 2022
Improve Article
Save Article

Each variable in C has an associated data type. Each data type requires different amounts of memory and has some specific operations which can be performed over it. It specifies the type of data that the variable can store like integer, character, floating, double, etc. The data type is a collection of data with values having fixed values, meaning as well as its characteristics. 

The data types in C can be classified as follows:

TypesDescription
Primitive Data TypesArithmetic types can be further classified into integer and floating data types.
Void TypesThe data type has no value or operator and it does not provide a result to its caller. But void comes under Primitive data types.
User Defined DataTypesIt is mainly used to assign names to integral constants, which make a program easy to read and maintain
Derived typesThe data types that are derived from the primitive or built-in datatypes are referred to as Derived Data Types.
Data Types in C

 

Different data types also have different ranges up to which they can store numbers. These ranges may vary from compiler to compiler. Below is a list of ranges along with the memory requirement and format specifiers on the 32-bit GCC compiler.

Data Type 
 
Memory (bytes) 
 
Range 
 
Format Specifier 
 
short int 
 

 
-32,768 to 32,767 
 
%hd 
 
unsigned short int 
 

 
0 to 65,535 
 
%hu 
 
unsigned int 
 

 
0 to 4,294,967,295 
 
%u 
 
int 
 

 
-2,147,483,648 to 2,147,483,647 
 
%d 
 
long int 
 

 
-2,147,483,648 to 2,147,483,647 
 
%ld 
 
unsigned long int 
 

 
0 to 4,294,967,295 
 
%lu 
 
long long int 
 

 
-(2^63) to (2^63)-1 
 
%lld 
 
unsigned long long int 
 

 
0 to 18,446,744,073,709,551,615 
 
%llu 
 
signed char 
 

 
-128 to 127 
 
%c 
 
unsigned char 
 

 
0 to 255 
 
%c 
 
float 
 

 
1.2E-38 to 3.4E+38%f 
 
double 
 

 
1.7E-308 to 1.7E+308%lf 
 
long double 
 
16 
 
3.4E-4932 to 1.1E+4932%Lf 
 

Integer Types

The integer data type in C is used to store the whole numbers without decimal values. Octal values, hexadecimal values, and decimal values can be stored in int data type in C. We can determine the size of the int data type by using the sizeof operator in C. Unsigned int data type in C is used to store the data values from zero to positive numbers but it can’t store negative values like signed int. Unsigned int is larger in size than signed int and it uses “%u” as a format specifier in C programming language. Below is the programming implementation of the int data type in C.

  • Range:  -2,147,483,648 to 2,147,483,647
  • Size: 2 bytes or 4 bytes
  • Format Specifier: %d

Note: The size of an integer data type is compiler-dependent, when processors are 16-bit systems, then it shows the output of int as 2 bytes. And when processors are 32-bit then it shows 2 bytes as well as 4 bytes.

C




// C program to print Integer data types.
#include <stdio.h>
 
int main()
{
    // Integer value with positive data.
    int a = 9;
   
    // integer value with negative data.
    int b = -9;
   
    // U or u is Used for Unsigned int in C.
    int c = 89U;
   
    // L or l is used for long int in C.
    long int d = 99998L;
 
    printf("Integer value with positive data: %d\n", a);
    printf("Integer value with negative data: %d\n", b);
    printf("Integer value with an unsigned int data: %u\n", c);
    printf("Integer value with an long int data: %ld", d);
 
    return 0;
}

Output

Integer value with positive data: 9
Integer value with negative data: -9
Integer value with an unsigned int data: 89
Integer value with an long int data: 99998

Character Types

Character data type allows its variable to store only a single character. The storage size of the character is 1. It is the most basic data type in C. It stores a single character and requires a single byte of memory in almost all compilers.

  • Range: (-128 to 127) or (0 to 255)
  • Size: 1 byte
  • Format Specifier: %c

C




// C program to print Integer data types.
#include <stdio.h>
 
int main()
{
 
    char a = 'a';
    char c;
 
    printf("Value of a: %c\n", a);
 
    a++;
    printf("Value of a after increment is: %c\n", a);
   
    // c is assigned ASCII values
    // which corresponds to the
    // character 'c'
    // a-->97 b-->98 c-->99
    // here c will be printed
    c = 99;
 
    printf("Value of c: %c", c);
 
    return 0;
}

Output

Value of a: a
Value of a after increment is: b
Value of c: c

Floating-Point Types

In C programming float data type is used to store floating-point values. Float in C is used to store decimal and exponential values. It is used to store decimal numbers (numbers with floating point values) with single precision.

  • Range: 1.2E-38 to 3.4E+38
  • Size: 4 bytes
  • Format Specifier: %f

C




// C Program to demonstrate use
// of Floating types
#include <stdio.h>
 
int main()
{
 
    float a = 9.0f;
    float b = 2.5f;
   
      // 2x10^-4
    float c = 2E-4f;
      printf("%f\n",a);
      printf("%f\n",b);
      printf("%f",c);
         
   
  return 0;
}

Output

9.000000
2.500000
0.000200

Double Types

A Double data type in C is used to store decimal numbers (numbers with floating point values) with double precision. It is used to define numeric values which hold numbers with decimal values in C. Double data type is basically a precision sort of data type that is capable of holding 64 bits of decimal numbers or floating points. Since double has more precision as compared to that float then it is much more obvious that it occupies twice the memory as occupied by the floating-point type. It can easily accommodate about 16 to 17 digits after or before a decimal point.

  • Range: 1.7E-308 to 1.7E+308
  • Size: 8 bytes
  • Format Specifier: %lf

C




// C Program to demonstrate
// use of double data type
#include <stdio.h>
 
int main()
{
 
    double a = 123123123.00;
    double b = 12.293123;
    double c = 2312312312.123123;
 
    printf("%lf\n", a);
 
    printf("%lf\n", b);
 
    printf("%lf", c);
 
    return 0;
}

Output

123123123.000000
12.293123
2312312312.123123

Void Data types

The void data type in C is used to specify that no value is present. It does not provide a result value to its caller. It has no values and no operations. It is used to represent nothing. Void is used in multiple ways as function return type, function arguments as void, and pointers to void.

Syntax:

// function return type void

void exit(int check);

// Function without any parameter can accept void.

int print(void);

// memory allocation function which
// returns a pointer to void.
void *malloc( size_t size); 

C




// C program to demonstrate
// use of void pointers
#include <stdio.h>
  
int main()
{
    int val = 30;
    void *ptr = &val;
    printf("%d", *(int *)ptr);
    return 0;
}

Output

30

We can use the sizeof() operator to check the size of a variable. See the following C program for the usage of the various data types:

C




// C Program to print size of
// different data type in C
#include <stdio.h>
 
int main()
{
      int size_of_int=sizeof(int);
     int size_of_char= sizeof(char);
      int size_of_float=sizeof(float);
    int size_of_double=sizeof(double);
   
    printf("The size of int data type : %d\n",size_of_int );
    printf("The size of char data type : %d\n",size_of_char);
    printf("The size of float data type : %d\n",size_of_float);
    printf("The size of double data type : %d",size_of_double);
   
  return 0;
}

Output

The size of int data type : 4
The size of char data type : 1
The size of float data type : 4
The size of double data type : 8

To check your knowledge of data types in C, go through the Quiz on Data Types.


My Personal Notes arrow_drop_up
Related Articles

Start Your Coding Journey Now!