A mode of data transmission in which a message is broken into a number of parts which are sent independently, over whatever route is optimum for each packet, and reassembled at the destination. Packet Switching uses Store and Forward technique while switching the packets; while forwarding the packet each hop first store that packet then forward.
As we know that the Data is divided into number of small packets to reduce the Total Delay. so, what do you think? Larger the number of packets, smaller the Delay?
No, Actually this is not True. Okay let’s understand with the example.
Given, Data size = 1000 Bytes Bandwidth = 1 MBps Header size = 100 Bytes Number of Hops = 3 assume Propagation dalay = 0
Explanation: These are different scenario as following below.
Case-1: If the number of Packets = 1
Size of the Data Packet, = Data size + Header size = 1000 + 100 = 1100 Bytes Transmission delay = L/BW = 1100/10^6 = 1.1 ms Total time taken = number of Hopes * Transmission delay = 3 * 1.1 = 3.3 ms
Case-2: If the number of Packets = 5
Size of each Data Packet = (1000/5) + 100 = 300 Bytes Transmission Delay for each Packet = 300/10^6 = 0.3 ms
Time taken by 1st Packet, = No of Hops * Transmission delay = 3*0.3 = 0.9 ms Time taken by the remaining 4 Packets = 4*Transmission delay = 4*0.3 = 1.2 ms Total Time Taken, = 0.9+1.2 = 2.1 ms
Case-3: If the no of Packets = 10
Size of each Data Packet = (1000/10) + 100 = 200 Bytes Transmission delay for each packet = 200/10^6 = 0.2 ms Time Taken by first Packet = 3*0.2 = 0.6 ms Time Taken by remaining Packets = 9*0.2 = 1.8ms Total Time Taken = 0.6+1.8 = 2.4 ms
Case-4: If the no of Packets = 20
Size of each Data Packet = (1000/20) + 100 = 150 Bytes Transmission delay for each Packet = 150/10^6 = 0.15 ms Time Taken by 1st Packet = 3*0.15 = 0.45 ms Time Taken by remaining 19 Packets = 19*0.15 = 2.85 ms Total Time Taken = 0.45 + 2.85 = 3.3 ms
As we can see that there exist a threshold value at which the Total time decreases and if we increase the number of Packets after that limit, Total time starts increasing. Initially the time is decreasing for some limit and after that time is going to increase. If the number of Packets are very large then it may take time more than the time taken by the transmission of single packet.
- Computer Network | Circuit Switching VS Packet Switching
- Computer Network | Packet Switching and Delays
- Computer Network | Switching techniques: Message switching
- Computer Network | Circuit Switching
- Difference between Circuit switching and Message switching
- Computer Network | Packet flow in different network
- Computer Network | Packet flow in the same network
- Computer Networks | Set 1
- Computer Networks | Set 14
- Computer Networks | Set 7
- Computer Networks | Set 8
- Computer Networks | Set 9
- Computer Networks | Set 10
- Computer Networks | Set 11
- Computer Networks | Set 13
If you like GeeksforGeeks and would like to contribute, you can also write an article using contribute.geeksforgeeks.org or mail your article to firstname.lastname@example.org. See your article appearing on the GeeksforGeeks main page and help other Geeks.
Please Improve this article if you find anything incorrect by clicking on the "Improve Article" button below.