Advanced RISC Machine (ARM) Processor is considered to be family of Central Processing Units that is used in music players, smartphones, wearables, tablets and other consumer electronic devices.
The architecture of ARM processor is created by Advanced RISC Machines, hence name ARM. This needs very few instruction sets and transistors. It has very small size. This is reason that it is perfect fit for small size devices. It has less power consumption along with reduced complexity in its circuits.
They can be applied to various designs such as 32-bit devices and embedded systems. They can even be upgraded according to user needs.
The main features of ARM Processor are mentioned below :
- Multiprocessing Systems –
ARM processors are designed so that they can be used in cases of multiprocessing systems where more than one processors are used to process information. First AMP processor introduced by name of ARMv6K had ability to support 4 CPUs along with its hardware.
- Tightly Coupled Memory –
Memory of ARM processors is tightly coupled. This has very fast response time. It has low latency (quick response) that can also be used in cases of cache memory being unpredictable.
- Memory Management –
ARM processor has management section. This includes Memory Management Unit and Memory Protection Unit. These management systems become very important in managing memory efficiently.
- Thumb-2 Technology –
Thumb-2 Technology was introduced in 2003 and was used to create variable length instruction set. It extends 16-bit instructions of initial Thumb technology to 32-bit instructions. It has better performance than previously used Thumb technology.
- One cycle execution time –
ARM processor is optimised for each instruction on CPU. Each instruction is of fixed length that allows time for fetching future instructions before executing present instruction. ARM has CPI (Clock Per Insttuction) of one cycle.
- Pipelining –
Processing of instructions is done in parallel using pipelines. Instructions are broken down and decoded in one pipeline stage. The pipeline advances one step at a time to increase throughput (rate of processing).
- Large number of registers –
Large number of registers are used in ARM processor to prevent large amount of memory interactions. Registers contain data and addresses. These act as local memory store for all operations.
Attention reader! Don’t stop learning now. Get hold of all the important CS Theory concepts for SDE interviews with the CS Theory Course at a student-friendly price and become industry ready.
- Advantages and Disadvantages of ARM processor
- Difference between Normal Processor and AI Processor
- Difference between 8051 and ARM
- Difference between AVR and ARM
- Difference between PIC and ARM
- Difference between RISC and CISC processor | Set 2
- Introduction of Input-Output Processor
- Vector processor classification
- Macro Processor
- Operation of SIMD Array Processor
- Types of Array Processor
- Microprocessor | Intel x86 evolution and main features
- Computer Organization | Amdahl's law and its proof
- Introduction of Control Unit and its Design
- Memory Hierarchy Design and its Characteristics
- Subprogram and its Characteristics
- Data Storage and its Sorts
- I/O Channels and its types
- Data Hazards and its Handling Methods
- Pipelined architecture with its diagram
If you like GeeksforGeeks and would like to contribute, you can also write an article using contribute.geeksforgeeks.org or mail your article to email@example.com. See your article appearing on the GeeksforGeeks main page and help other Geeks.
Please Improve this article if you find anything incorrect by clicking on the "Improve Article" button below.