Prerequisite – Introduction of Sequential Circuits
Sequential circuits are those which use previous and current input variables by storing their information and placing them back into the circuit on the next clock (activation) cycle.
There are two types of input to the combinational logic. External inputs which come from outside the circuit design which are not controlled by the circuit Internal inputs which are functions of a previous output state.
Asynchronous sequential circuits do not use clock signals as synchronous circuits do. Instead, the circuit is driven by the pulses of the inputs which means the state of the circuit changes when the inputs change. Also, they don’t use clock pulses. The change of internal state occurs when there is a change in the input variable. Their memory elements are either un-clocked flip-flops or time-delay elements. They are similar to combinational circuits with feedback.
- No clock signal, hence no waiting for a clock pulse to begin processing inputs, therefore fast. Their speed is faster and theoretically limited only by propagation delays of the logic gates.
- Robust handling. Higher performance function units, which provide average-case completion rather than worst-case completion. Lower power consumption because no transistor transitions when it is not performing a useful computation. Absence of clock drivers reduce power consumption. Less severe electromagnetic interference (EMI).
- More tolerant to process variations and external voltage fluctuations. Achieve high performance while gracefully handling variable input and output rates and mismatched pipeline stage delays. Freedom from difficulties of distributing a high-fan-out, timing-sensitive clock signal. Better modularity.
- Less assumptions about the manufacturing process. Circuit speed adapts to changing temperature and voltage conditions. Immunity to transistor-to-transistor variability in the manufacturing process, which is one of the most serious problems faced by the semiconductor industry
- Some asynchronous circuits may require extra power for certain operations.
- More difficult to design and subject to problems like sensitivity to the relative arrival times of inputs at gates. If transitions on two inputs arrive at almost the same time, the circuit can go into the wrong state depending on slight differences in the propagation delays of the gates which is known as race condition.
- Number of circuit elements (transistors) maybe double that of synchronous circuits. Fewer people are trained in this style compared to synchronous design. Difficult to test and debug. Their output is uncertain.
- Performance of asynchronous circuits may be reduced in architectures that have a complex data path. Lack of dedicated, asynchronous design-focused commercial EDA tools.
- Difference between Synchronous and Asynchronous Sequential Circuits
- Introduction of Sequential Circuits
- Synchronous Sequential Circuits in Digital Logic
- Construction of Combinational Circuits
- Combinational circuits using Decoder
- Differences between Synchronous and Asynchronous Counter
- Switch Debounce in Digital Circuits
- Mathematics | Walks, Trails, Paths, Cycles and Circuits in Graph
- Difference between combinational and sequential circuit
- RTL (Register Transfer Level) design vs Sequential logic design
- Concept Of Address Split in OS
- Concept behind Multiple Booting Guide
- Formation Of Process from Program
- Two Level Paging and Multi Level Paging in OS
If you like GeeksforGeeks and would like to contribute, you can also write an article using contribute.geeksforgeeks.org or mail your article to firstname.lastname@example.org. See your article appearing on the GeeksforGeeks main page and help other Geeks.
Please Improve this article if you find anything incorrect by clicking on the "Improve Article" button below.