Open In App

7 Tips To Write Clean And Better Code in 2024

Last Updated : 16 Jan, 2024
Like Article

Software engineering is not just all about learning a language and building some software. As a software engineer or software developer, you are expected to write good software. So the question is what makes good software? Good software can be judged by reading some pieces of code written in the project. If the code is easy to understand and easy to change then definitely it’s a good software and developers love to work on that.


It’s a common thing in development that nobody wants to continue a project with horrible or messy code (It becomes a nightmare sometimes…). Sometimes developers avoid writing clean code due to deadline pressure. They rush to go faster but what happens actually is they end up going slower. It creates more bugs which they need to fix later going back on the same piece of code. This process takes much more time than the amount of time spent on writing the code. A study has revealed that the ratio of time spent reading code versus writing is well over 10 to 1.


It doesn’t matter if you are a beginner or an experienced programmer, you should always try to become a good programmer (not just a programmer…). Remember that you are responsible for the quality of your code so make your program good enough so that other developers can understand and they don’t mock you every time to understand the messy code you wrote in your project. Before we discuss the art of writing clean and better code let’s see some characteristics of it…

What Makes a Code “a Clean Code”?

  1. Clean code should be readable. If someone is reading your code they should have a feeling of reading poetry or prose.
  2. Clean code should be elegant. It should be pleasing to read and it should make you smile.
  3. Clean code should be simple and easy to understand. It should follow the single responsibility principle (SRP).
  4. Clean code should be easy to understand, easy to change, and easy to take care of.
  5. Clean code should run all the tests.

“Clean code is simple and direct. Clean code reads like a well-written prose. Clean code never obscures the designer’s intent but rather is full of crisp abstractions and straightforward lines of control.” -Grady Booch (Author of Object-Oriented Analysis and Design with Applications)

7 Tips To Write Clean And Better Code

Writing Clean Code is important for better collaboration among developers. You can easily debugg the issues in clean and redable code. Also, a clean and redable code reduce the maintenance cost drastically and enhance the overall quality of software. So, below are some of the best practices and tips that software developers follow to write clean and better code.

1. Use Meaningful Names

You will be writing a lot of names for variables, functions, classes, arguments, modules, packages, directories, and things like that. Make a habit to use meaningful names in your code. Whatever names you mention in your code it should fulfill three purposes…what it does, why it exists, and how it is used. For Example:

int b; // number of users.

In the above example, you need to mention a comment along with the name declaration of a variable which is not a characteristic of a good code. The name that you specify in your code should reveal its intent. It should specify the purpose of a variable, function, or method. So for the above example, a better variable name would be:- int number_of_users. It may take some time to choose meaningful names but it makes your code much cleaner and easy to read for other developers as well as for yourself. Also, try to limit the names to three or four words.

2. Single Responsibility Principle (SRP)

Classes, Functions, or methods are a good way to organize the code in any programming language so when you are writing the code you really need to take care that how to write a function that communicates its intent. Most beginners do this mistake they write a function that can handle and do almost everything (perform multiple tasks). It makes your code more confusing for developers and creates problems when they need to fix some bugs or find some piece of code. So when you are writing a function you should remember two things to make your function clean and easy to understand…

  1. They should be small.
  2. They should do only one thing and they should do it well.

The above two points clearly mention that your function should follow the single responsibility principle. This means it shouldn’t have a nested structure or it should not have more than two indent levels. Following this technique make your code much more readable and other developers can easily understand or implement another feature if your function fulfills a specific task. Also, make sure that your function should not have more than three arguments. More arguments perform more tasks so try to keep the arguments as less as possible. Passing more than three arguments makes your code confusing, quite large, and hard to debug if any problem would be there. If your function has a try/catch/finally statement then make a separate function containing just the try-catch-finally statements. Take care of your function name as well. Use a descriptive name for your function which should clearly specify what it does.


function subtract(x, y) {
return x - y;

In the above example, the function name clearly shows that its purpose is to perform subtraction for two numbers, also it has only two arguments. Read more about writing a good function from the link 7 Common Programming Principles That Every Developer Must Follow and SOLID Principle.

3. Avoid Writing Unnecessary Comments

It’s a common thing that developers to use comments to specify the purpose of a line in their code. It’s true that comments are really helpful in explaining the code and what it does but it also requires more maintenance of your code. In development, code move here and there but if the comment remains in the same place then it can create a big problem. It can create confusion among developers and they get distracted as well due to useless comments. It’s not like you shouldn’t use comments at all, sometimes it is important, for example…if you are dealing with third-party API where you need to explain some behavior there you can use comments to explain your code but don’t write comments where it’s not necessary. Today modern programming languages syntax are English-like through and that’s good enough to explain the purpose of a line in your code. To avoid comments in your code use meaningful names for variables, functions, or files.

Good code is its own best documentation. As you’re about to add a comment, ask yourself, “How can I improve the code so that this comment isn’t needed?” Improve the code and then document it to make it even clearer. -Steve McConnell

4. Write Readable Code For People

A lot of people especially beginners make mistakes while writing code they write everything in a single line and don’t give proper whitespace, indentation, or line breaks in their code. It makes their code messy and difficult to maintain. There’s always a chance that another human will get to your code and they will have to work with it. It wastes other developers’ time when they try to read and understand the messy code. So always pay attention to the formatting of your code. You will also save your time and energy when you will get back to your own code after a couple of days to make some changes. So make sure that your code should have proper indentation, space, and line breaks to make it readable to other people. The coding style and formatting affect the maintainability of your code. A software developer is always remembered for the coding style he/she follows in his/her code. 


// Bad Code
class CarouselRightArrow extends Component{render(){return (<a href="" className="carousel__arrow carousel__arrow--left" onClick={this.props.onClick}> <span className="fa fa-2x fa-angle-left"/> </a> );}};
// Good Code
class CarouselRightArrow extends Component {
  render() {
    return (
        className="carousel__arrow carousel__arrow--left"
        <span className="fa fa-2x fa-angle-left" />

Code formatting is about communication, and communication is the professional developer’s first order of business. -Robert C. Martin (Uncle Bob)

5. Write Unit Tests

Writing Unit tests is very important in development. It makes your code clean, flexible, and maintainable. Making changes in code and reducing bugs becomes easier. There is a process in software development which is called Test Driven Development (TDD) in which requirements are turned into some specific test cases then the software is improved to pass new tests. According to Robert C. Martin (Uncle Bob), the three laws of TDD demonstrates that…

  1. You are not allowed to write any production code unless it is to make a failing unit test pass.
  2. You are not allowed to write any more of a unit test than is sufficient to fail, and compilation failures are failures.
  3. You are not allowed to write any more production code than is sufficient to pass the one failing unit test.


After I jumped on board the unit testing bandwagon, the quality of what I deliver has increased to the point that the amount of respect I get from my colleagues makes me feel awkward. They think I’m blessed or something. I’m not gifted or blessed or even that talented, I just test my code. – Justin Yancey, Senior Systems Development Engineer, Amazon

6. Be Careful With Dependencies

In software development, you really need to be careful about your dependencies. If possible your dependencies should always be a singular direction. It means….let’s say we have a kitchen class that is dependent on a dishwasher class. As long as the dishwasher doesn’t also dependent on the kitchen class this is a one-directional dependency. The kitchen class is just using the dishwasher but the dishwasher doesn’t really care and anyone can use it. It doesn’t have to be a kitchen. This example of one-directional dependency is easier to manage however it’s impossible to always have one-directional dependency but we should try to have as many as possible. When dependency goes in multiple directions, things get much more complicated. In bidirectional dependency both entities depend on each other, so they have to exist together even though they are separate. It becomes hard to update some systems when their dependencies don’t form a singular direction. So always be careful about managing your dependencies.

7. Make Your Project Well Organized

This is a very common problem in software development that we add and delete so many files or directories in our project and sometimes it becomes complicated and annoying for other developers to understand the project and work on that. We agree that you can not design a perfect organization of folders or files on day one but later on, when your project becomes larger you really need to be careful about the organization of your folder, files, and directories. A well-structured folder and file make everything clear and it becomes easier to understand a complete project, search some specific folder and make changes in it. So make sure that your directory or folder structure should be in an organized manner (The same applies to your code as well). 

Best Books For Understanding How to Write Clean and Better Code:


For the purpose of creating high-quality software that is ultimately simple to maintain, test, and update, cleaner and better code must be written. In a Project different developers have to add multiple features on a shared project, so it become important for a developer to write , more clean and redable code that can be easily understandable by its naming convention itself. Developers can produce software that is reliable, scalable, and simple to use by adhering to the 7 recommended practices listed above and writing the code in a clear, organized, legible, and efficient manner.

FAQs on Clean And Better Code

1. How can I write clean and Better Code?

Write Clean and Better code is a best practice which comes with experience. But here are some tips that you can follow to write clean and better code:

1. Use meaningful names
2. Single Responsibility Principle (SRP)
3. Avoid Writing Unnecessary Comments
4. Write Readable Code For People
5. Write Unit Tests

2. Why is writing Clean and Better Code is important?

While working on a Project, multiple people interact with the codebase, so it is important for a Programmer to write clean and better code.

3. How can I reduce Code Duplication?

To reduce Code Duplication, you can follow “DRY” (Do not Repeat Yourself) Principle. It is one of the important aspect of writing clean and maintainable code.

Similar Reads

10 Tips and Tricks to Write the Better Python Code
Writing code is hard, and Python programmers often face a steep learning curve. One of the most common issues that can prevent you from writing readable code is bad practices in organizing your code. In this article, we'll discuss some ways to help you avoid making those mistakes and get better at writing Python code. [caption width="800"] [/captio
9 min read
Best Practices to Write Clean Python Code
Python is one of the most loved programming languages today. Shockingly, Python has overtaken Java in the list of top programming languages and is now the most studied language! It is the second most used language after JavaScript and is slowly beating the competition to be on the top. It is used extensively across various domains like web developm
6 min read
7 Tips to Become a Better Java Programmer in 2024
Java is a very successful and popular programming language. It is very reliable and is widely used in our day-to-day lives, prominently seen in web or mobile applications. There is much demand for Java these days and Java programmers are being recruited largely in the Information Technology sector.  Want to learn Java programming and have zero expe
3 min read
Debugging: Tips To Get Better At It
Debugging... One of the most terrible and painful things for developers and no matter what every developer has to go through this phase while working on a project. You start working on a project with full enthusiasm. You wrote thousands of lines of clean code in your development environment, everything works fine there but when you try to take the
8 min read
How to Google like a Pro – 10 Google Search Tips for Better Results!
Every single day, countless individuals rely on Google search to fulfill their diverse needs. Whether it's students seeking knowledge for their assignments, professionals conducting research, or even those looking for a quick dose of entertainment, Google is the go-to tool. However, are you truly harnessing the power of effective Google search tips
12 min read
12 Tips to Become a Better Programmer
Becoming a good programmer is something that every computer science student wants. Students try to learn coding from the start of their college in order for becoming good programmers. You just have to start from the basics and then learn slowly, as codes are the building blocks for any program therefore it is necessary that you learn it step by ste
5 min read
10 Tips to Maximize Your Python Code Performance in 2024
Python is a powerful programming language that has been gaining popularity in recent years. It's known for its versatility and ease of use, making it a great choice for beginners and experienced programmers alike. However, with so many resources available on the internet, it can be difficult to know where to start. That's why we've put together thi
19 min read
What is Clean Architecture in Android?
With the growing period of technology, it is critical to get the architecture right if you want to build a fantastic software program, which is why it’s so essential. If you’re interested in creating android apps with the help of clean architecture, then you have arrived at the right place. Here, we aren’t just providing you the MVVM (Model View-Vi
5 min read
7 Clean Coding Practices Developers Should Follow
Developers have this tendency to write efficient code but sometimes they lack clean coding practice. A good developer is one who writes code that is understandable by machines but the best developer writes code that is understandable by other developers. The code written should look good, clear, and understandable. [caption width="800"] [/caption]
5 min read
What is a Clean Frontend Architecture?
In recent years, front-end development has taken a massive leap. The rise of frameworks and libraries has transformed the way developers approach problems and create exquisite user experiences. All this makes it essential to write good code in order to make the application more modular, scalable, and testable. This can be achieved by implementing t
12 min read