Isochoric Process in thermodynamics is referred to as a process in which the volume remains constant and the work done in this case is zero. This process is also called the Isometric Process, or Constant-Volume Process. The volume of gas in this process always remains constant and the work done in this thermodynamic process is zero.
In this article, we will learn about, the Isochoric Process Definition, its Formula, Examples, and others in detail.
What is an Isochoric Process
Isochoric process is also known as a constant-volume process. It is a thermodynamic process where the total volume of the system remains constant and so the work done in this process is zero.
An example of an isochoric process is when air is heated or called in a closed container its volume always remains constant.
Isochoric Process Formula
Isochoric process is defined as the thermodynamic proess in which the volume of the system remained constant so the the change in volume is zero and hence the work done by the gas is zero. Mathematically Isochoric Process is expressed as
For Isochoric Process,
Change in Volume(â–³V) = 0
Now, work done by the gas is,
W = P.â–³V = P.0 = 0
Thus, the work done by the gas in the Isochoric process is zero.
W = 0
Isochoric Process Characteristics
- It takes place at constant volume, also known as an isometric process.
- In an isochoric process, the work done is zero, as the volume of the system remains constant.
- This means that the change in volume ( ΔV ) is equal to zero, and as a result, the work done ( W ) equals zero.
- On a pressure-volume (P-V) diagram, an isochoric process appears as a straight vertical line.
Examples of Isochoric Process
Some important examples of isochoric processes include:
Otto Cycle: This thermodynamic cycle is applicable in car engines and represents heat transfer during the ignition process. In an Otto cycle the first and the last process is isochoric in nature, where the heat and pressure change without any change in the volume of the gas.
Heating of Water in a Tightly Sealed Flask: If we heat the water inside a closed flask then the volume of the water remains constant even though its temperature increases and its pressure also increases. This is the example of Isochoric process.
Pressure Cooker: When sealed closed, the volume inside cannot change, so when heat is added, pressure and temperature increase rapidly. However, pressure cookers expand slightly, and some gas is released from a valve on top.
Work Done and Heat Transfer in Isochoric Process
Since Volume of the system remains constant in an Isochoric process. This means that the system does no work, as work is defined as force times distance, and there is no change in distance (since the volume is constant). However, heat can still be transferred into or out of the system, which will cause a change in internal energy. The change in internal energy is equal to the quantity of heat transferred.
W = 0 (In case of Isochoric Process)
Now, the equation for the heat transferred in an isochoric process is:
Q = ΔU + W
W = 0
Q = ΔU
Mathematical Representation of Isochoric Process
The isochoric process can be represented mathematically by the following equation:
ΔU = Q
Equation is based on the first law of thermodynamics, which states that the total energy of an isolated system is constant. In an isochoric process, the total energy of the system is equal to the internal energy of the system, so the change in internal energy is equal to the heat added to the system.
The following equation can also represent the isochoric process:
CvΔT = Q
where,
- Cv is Molar Heat Capacity at a Constant Volume
- ΔT is Change in Temperature of System
First Law of Thermodynamics in Isochoric Process
According to the first law of thermodynamics the total energy of an isolated system remains constant. This means that the energy within the system can only be transferred or transformed, not created or destroyed. In an isochoric process, the only energy transfer that occurs is heat transfer. Therefore, the change in the system’s internal energy is equal to the amount of heat transferred into or out of the system.
The equation for the first law of thermodynamics for an isochoric process is:
ΔU = Q
Since the work done by the system is zero, the equation can also be written as:
ΔU = Q + W
Plugging in W = 0, we get the equation for the first law of thermodynamics for an isochoric process:
ΔU = Q
This equation means that the change in internal energy of the system is equal to the amount of heat transferred into or out of the system. If the system is heated, the internal energy increases and Q is positive. If the system is cooled, the internal energy decreases, and Q is negative.
Also Check, Second Law of Thermodynamics
Isochoric Process in Ideal Gases
For an ideal gas, the relationship between pressure (P), temperature (T), and volume (V) is given by the ideal gas law:
PV = nRT
Since V is constant for an isochoric process, we can rearrange the ideal gas law to get:
P/T = V = constant
This means that the pressure and temperature of an ideal gas are directly proportional to each other in an isochoric process. In other words, if the temperature of an ideal gas increases, the pressure will also increase, and vice versa
PV Diagrams of Isochoric Process
A vertical line represents an isochoric process on a PV diagram. This is because the volume of the system does not change, so the pressure can only change vertically. This is shown in the image added below as the PV diagram of Isochoric process,
Isochoric processes are often used to model the heating or cooling of a gas in a sealed container. For example, when a gas is heated in a closed container, the pressure of the gas will increase. This is because the gas molecules move faster and hit the walls of the container more often.
Applications of the Isochoric Process
Here are some real-world examples of isochoric processes:
- Heating or Cooling a Confined gas: A common example of an isochoric process is heating or cooling a gas in a sealed container. For instance, consider a balloon filled with air and placed in a refrigerator. As the air cools, its internal energy decreases, and its pressure and temperature drop. However, the volume of the balloon remains constant due to its rigid container.
- Heating a Material in a Bomb Calorimeter: A bomb calorimeter is a device used to measure a substance’s combustion heat. The substance is placed within a sealed chamber, and its combustion is initiated. The heat released during the combustion causes the temperature of the substance and the surrounding water to rise, but the volume remains constant.
- Gas Compression in a Piston-Cylinder Device with a Locked Piston: In a piston-cylinder device, the piston can move up and down, changing the volume of the enclosed gas. However, if the piston is locked in place, the volume remains constant, and any gas compression or expansion would be an isochoric process.
- Isometric Exercise: It involves contracting muscles against an immovable object, such as pushing against a wall. During these exercises, the muscles exert tension, but since there is no movement, no work is done, and the process is considered isochoric.
- Gas Storage in Tanks: Gas storage tanks, such as those used for storing propane or compressed air, typically maintain a constant volume. When gas is added or removed from the tank, the pressure fluctuates, but the volume remains constant, making it an isochoric process.
In addition to these examples, isochoric processes play a role in various thermodynamic cycles, such as the Otto and Diesel cycles, commonly used in internal combustion engines. Understanding isochoric processes is essential for analyzing the efficiency and performance of these engines.
Read More,
Isochoric Process JEE Questions
Q1. What is true regarding the work performed by a system whose volume remains constant and undergoes an increase in pressure?
The system does no work. The answer to this question, is given using formula, W = −PΔV
Q2. Which is Correct?
- In an Isobaric Process, ∆P = 0
- In an Isochoric Process, ∆W = 0
- In an Isothermal Process, ∆T = 0
- In an Isothermal Process, ∆Q = 0
Option (4) In an Isothermal Process, ∆Q = 0 is Correct
Q3. In which thermodynamic process, volume remains same
- Isobaric
- Isothermal
- Adiabatic
- Isochoric
Option (4) Isochoric is Correct
Q4. In a reversible Isochoric change
- ∆W = 0
- ∆Q = 0
- ∆T = 0
- ∆U = 0
Option (1) ∆W = 0 is Correct
Q5. In an Isochoric process if T1 = 27° C and T2 = 127° C, then P1/P2 is equal to
- 9/59
- 2/3
- 3/4
- 7/57
Option (3) 3/4 is Correct
At Constant Volume P ~ T,
P1/P2 = T1/T2
P1/P2 = 300/400 = 3/4
Isochoric Process Numericals
Numericals on Isochoric Process are added below,
Example 1: 500 g of water is heated from 30°C to 60°C. Determine the water’s change in internal energy, ignoring its small expansion? (specific heat of water 4184 J/kg.K)
Solution:
- Water’s volume barely changes when it heats up from 30°C to 60°C.
- Work done by the system is zero in an Isochoric process.
- Heat supplied to it is used to increase only the internal energy.
∆U = Q = msv ∆T
Given,
- Mass of Water = 500 g = 0.5 kg
- Change in Temperature = (60 – 30) = 30 K
- s = 4184 J/kg.K
∆U = Q = 0.5×4184×30 = 62.76 kJ
Thus, change in internal energy is 62.76 kJ
Example 2: A gas in a 10 L volume cylinder is subjected to a pressure of 1 atm. The gas experiences a rise in temperature from 34 °C to 60 °C in an isochoric process. If molar specific heat Cv = 2.5 × R where R = 8.31 J/mol K. Calculate the change in Internal energy.
Solution:
Given,
- P = 1 atm = 101325 Pa
- V = 10 l = 0.01 m3
- ΔT = 60 – 34 = 26 °C = 26 K
- Cv = 2.5 × R = 2.5 × 8.31 = 20.775
Qv = nCv ΔT
Using Ideal Gas Equation
PV = nRT
n = PV/RT
n = ( 101325).(0.01)/(8.31).(26)
n= 0.39 moles
Therefore,
ΔU = Qv = nCv ΔT
ΔU = 0.39 x 2.5x 8.31x 26
ΔU = 210.65 J
Example 3: In a sealed container, 0.1 moles of monoatomic gas are kept at 27°C. The container is then heated to 500K. Calculate the change in internal energy of gas. (R = 8.315 J/mol.K)
Solution:
Given,
- n = 0.1 mol
- Ti = 27°C + 273 = 300 K
- Tf = 500 K
- R = 8.315 J/mol.K
For an isochoric process, ΔV = 0. Therefore work done is zeo.
From Frst law of Thermodynamics,
ΔU = ΔQ
For Monoatomic Gas,
ΔU = 3/2nRΔT
ΔU = 3/2nR(Tf – Ti)
ΔU = 3/2 (0.1 mol)(8.315 J/mol.K)(500K – 300K)
ΔU = 3/2 (0.1 mol)( 8.315 J/mol.K)(200K)
ΔU = 249.45 J
ΔU = 0.39 × 2.5 × 8.31 × 26
ΔU = 210.65 J
Example 4: 2 kg of water is heated from 50°C to 80°C in a closed vessel. What will be the change in the internal energy of the water? (specific heat of water = 4184 J/kg.K)
Solution:
Given,
- Mass of Water = 2 kg
- Ti = 50°C = 323K
- Tf = 80°C = 353K
- cv = 4184 J/kg.K
In an isochoric process, work done is 0. Hence the internal energy is only dependent on the heat absorbed. Thus,
ΔU = ΔQ = mcvΔT
ΔU = 2 kg × 4184 J/kg.K × (353K – 323K)
ΔU = 2 kg × 4184 J/kg.K × 30K
ΔU = 251.04 kJ
Isochoric Process Frequently Asked Questions
What is meant by Isochoric Process?
Isochoric process means a constant-volume process, where the volume of a closed system doesn’t change.
What is Work Done by an Ideal Gas in Isochoric Process?
In an isochoric process, the work done by an ideal gas is zero, as the volume remains constant.
What is PV Equation for Isochoric Process?
PV equation for Isochoric Process is P/T = V = constant
What is an Example of Isochoric Process?
Heating or Cooling a gas in a sealed container, like a balloon in a refrigerator, exemplifies an isochoric process in everyday situations.
How do you find Q in an Isochoric Process?
Q in Isochoric process is calculated as, ΔU = Q
What are Isochoric and Isobaric Processes?
Isochoric Process: When the volume stays the same, it’s isochoric. Imagine a balloon not changing its size.
Isobaric Process: When the pressure remains constant, like cooking in a pot with a lid on – pressure stays steady.
What is Iochoric Process of Heat Transfer?
Isochoric heat transfer: Heat added or removed without changing volume, like heating a closed bottle.
Share your thoughts in the comments
Please Login to comment...