Open In App

Allotropes of Sulphur

Last Updated : 30 Nov, 2021
Like Article

The tenth most prevalent element in the universe is sulphur. It can also be found in the form of sulphide in a variety of meteorites. The existence of a sulphur element in molten, gaseous, and solid states gives the Jupiter moon lo its unusual colours. Sulphur is the sixth most prevalent element on Earth in terms of mass. Elemental sulphur is most commonly found near volcanic areas and hot springs. In the past, Sicily was the principal source of sulphur. Submarine volcanoes also result in the production of molten sulphur lakes, which are mostly found on the seafloor.

Anaerobic bacteria’s action on sulphate minerals such as gypsum results in the synthesis of native sulphur. Previously, commercial production was based on fossil-based sulphur deposits from gypsum in salt domes. This process, however, is not currently the primary source of sulphur for commercial use. Many valuable metal ores, such as galena, blende, and gypsum, are sulphur compounds. It can be found in the ores as sulphides or sulphates. Sulfur compounds can also be found in natural gas, petroleum, and coal.


The element sulphur, often known as sulfur, is one of the most reactive elements in the periodic table. It is a non-metal that belongs to the periodic table’s group 16 (VI A). 

This chemical element has an atomic number of 16 and is symbolized as S. 

The elemental sulphur is a crystalline solid with a vivid yellow colour at room temperature. The element sulphur is prevalent throughout the universe. Sulfur has been used by humans since the dawn of time. Brimstone, which means “firestone,” was the name given to it in the past.

Physical Properties of Sulphur

  1. When found naturally, sulphur has a yellowish colour and is frequently found as a crystal.
  2. At room temperature, sulphur is non-reactive. Sulfur or sulphur can combine to form a variety of polyatomic molecules.
  3. S8, also known as octa-sulfur, is one of the most common sulphur molecules. It is a soft, odourless solid with a bright yellow colour. This molecule has a melting point of 115.21 degrees Celsius and a boiling point of 444.6 degrees Celsius. When this molecule is between its melting and boiling points, it polymerizes, resulting in increased viscosity but lower density.
  4. Depolymerization occurs at higher temperatures, resulting in decreased viscosity.
  5. Depending on the allotrope, the density varies.
  6. All stable sulphur allotropes do not allow electricity to pass through them. As a result, they are excellent electrical insulators.

Chemical Properties of Sulphur

  1. Sulfur combustion produces a blue flame and an unpleasant odour due to the formation of sulphur dioxide.
  2. Sulfur is insoluble in water but slightly soluble in nonpolar organic solvents such as benzene.
  3. This element’s most common oxidation states are +4 and +6.
  4. Sulfur is highly reactive and almost all elements react with it, including iridium, which is highly unreactive except for noble gases.
  5. Sulfur compounds have many unusual properties, including the ability to catenate in the same way that carbon does.
  6. Sulphur’s properties allow it to form chain structures as well as a ring system, similar to carbon.
  7. One of the most well-known sulphur compounds is hydrogen sulphide (H2S). It is a colourless, poisonous gas that smells like rotten eggs. It is naturally present in mineral water and volcanoes as vapours. A large amount of hydrogen sulphide is produced during the sulphur removal process from petroleum.
  8. Sulfur and oxygen can also combine to form a variety of compounds. Sulfur dioxide, a poisonous and colourless gas, is the most well-known sulphur oxide.
  9. In addition, it is used as a reducing agent and bleach in a variety of industries. It was also used by scientists to produce sulphur trioxide. This oxide is also beneficial in the ripening of fruits and the preservation of food.

Uses of Sulphur

  • Sulfur is required for the synthesis of other essential chemicals. Sulfuric acid, the most important chemical produced by sulphur, has numerous industrial applications.
  • The reaction of sulphur with methane produces carbon disulfide, which is required for the production of rayon and cellophane.
  • Another important application of sulphur is in the vulcanization of rubber.
  • Organosulfur compounds are found in a wide range of pharmaceutical products. It is also found in a variety of agrochemicals and dyestuffs.
  • Since ancient times, people have used elemental sulphur as pesticides and fungicides. Dusting sulphur (powdered sulphur) is a common pesticide used in organic farming.
  • Sulfur plays an important role in the body and is required for the synthesis of certain proteins. Sulfur, for example, is required for the synthesis of glutathione, which acts as a powerful antioxidant to protect your cells from damage.
  • While sulphur found in foods is beneficial to the body, there is little evidence that taking sulphur supplements is beneficial.
  • Sulfur is an FDA-approved ingredient for use in over-the-counter dandruff products. It is frequently used in conjunction with salicylic acid. However, there is limited evidence to support that use.
  • Sulfur supplements are frequently used to treat osteoarthritis.
  • When used topically, sulphur may be safe. Sulfur-containing products containing up to 10% sulphur have been used safely in clinical studies lasting up to eight weeks.

Allotropes of Sulphur

Sulphur generates a number of allotropes. The first is yellow rhombic sulphur (α-sulphur), and the second is monoclinic sulphur (β-sulphur). The most intriguing feature is that the allotropes of the sulphur compound are interconvertible in terms of thermal stability. It means that rhombic sulphur produces monoclinic sulphur when heated above 369K.

Rhombic sulphur (α-sulphur)

Rhombic sulphur is a crystalline substance with an octahedral shape. When we heat the roll sulphur solution in the CS2, we get rhombic sulphur. It has a yellow colour, a specific gravity of 2.06, and a melting point of 385.8K. Rhombic sulphur compounds are not soluble in water, but they are soluble in ether, benzene, or alcohol.

Monoclinic sulphur (β-sulphur)

When we melt rhombic sulphur in a dish and cool it, we get monoclinic sulphur. In this process, we poke two holes in the crust and pour out the remaining liquid. When the crust is removed after this process, we get colourless needle-shaped crystals of -sulphur.

Colloidal Sulphur

It is created by passing hydrogen sulphide through a saturated and cooled sulphur dioxide solution in water. The other method is to mix an alcohol and sulphur solution into the water. It also serves as a solvent in the carbon disulfide reaction. It can be used in pharmaceuticals.

Sample Questions

Question 1: What are the three common uses of sulfur?


It is used in the production of automobile batteries, fertiliser, oil refining, water treatment, and mineral extraction. Other uses for sulfur-based chemicals include rubber vulcanization, bleaching paper, and the manufacture of products such as cement, detergents, and pesticides.

Question 2: How does one get sulfur naturally?


Sulfur is extracted from natural gas, coal, crude oil, and other sources such as flue dust and gases produced during the processing of metal sulphide ores. Elemental sulphur can be obtained in a variety of forms, such as sulphur flowers, fine crystalline powder, and roll sulphur.

Question 3: What is the Biological Role of the Sulphur?


Sulphur is an important component of every living cell. It is found in equal amounts in the human body as potassium. The majority of sulphur in plants and animals is found in the form of amino acids. Eggs are heavy in sulphur, which helps chicks’ feathers grow. The smell of decaying eggs is caused by hydrogen sulphide production. Sulfur’s role in the cell is to decrease hydrogen and its electrons, allowing for cellular repair.

Question 4: What are some chemical properties of sulphur?


Due to the creation of sulphur dioxide, burning sulphur generates a blue flame and a disagreeable odour. Sulfur is water insoluble but somewhat soluble in non-polar organic solvents such as benzene. This element’s most prevalent oxidation states are +4 and +6. Except for noble gases, sulphur is highly reactive and almost reacts with all elements, including iridium, which is rather unreactive.

Question 5: What is octa-sulphur?


S8, also known as octa-sulfur, is a sulphur molecule. It’s a spongy, odourless solid with a bright yellow colour. This molecule polymerizes when it is between its melting and boiling temperatures, resulting in increased viscosity but lower density.

Previous Article
Next Article

Similar Reads

Sulphur has an Atomic number 16 and a Mass of 32. State the Number of Protons and Neutrons in the Nucleus of Sulphur. Give a simple Diagram to show the Arrangement of Electrons in an Atom of Sulphur.
The number of protons in the nucleus of an atom is equal to its atomic number. In the case of Sulphur (S), which has an atomic number of 16. This means that Sulphur atoms have 16 protons in their nuclei. To find the number of neutrons, we subtract the atomic number from the atomic mass. In this case, the atomic mass of sulphur is 32. Therefore, the
1 min read
Sulphur Monoxide and Sulphur Dioxide
Sulphur is plentiful, multivalent, and nonmetallic. At normal temperature, elemental sulphur is a bright yellow, crystalline solid. Sulfur is the tenth most abundant element in the universe by mass and the fifth most abundant on Earth. Sulfur on Earth is typically found in the form of sulphide and sulphate minerals, while it is occasionally discove
8 min read
Allotropes of Phosphorus
Despite the fact that people have been using the periodic table with phosphorus (P) in it for thousands of years, it was not until 1669 that it was isolated and named by a chemist named Brand. Phosphorus is an element that cannot be found naturally in our environment. It is highly reactive. Phosphorus is a chemical element with an atomic number of
5 min read
Allotropes of Carbon
Allotropes of Carbon are the forms of carbon that have different structures and properties. Allotrope is the phenomenon in which an element can exist in more than one physical state. The well-known allotropes of carbon are Diamond and Graphite. Various other allotropes of carbon are explained in the article below. In this article, we will learn abo
8 min read
Oxides of Sulphur
Sulphur oxide is a group of sulphur and oxygen compounds, the most important of which are sulphur dioxide (SO2) and sulphur trioxide (SO3), which are both produced in large amounts as intermediary steps in the production of sulfuric acid. The dioxide is sulphurous acid's acid anhydride (a chemical that reacts with water to generate acid), whereas t
8 min read
Oxoacids of Sulphur
Oxoacids are oxygen-containing acids. Many oxoacids, such as H2SO4, H2SO3, and others, are known to be formed by sulphur. When sulphur is coordinated to oxygen, it forms a tetrahedral structure in oxoacids. Sulfur oxoacids are sulphur, oxygen, and hydrogen-containing chemical compounds. Sulfuric acid is the most well-known and widely utilised in in
6 min read
Sulphur Dioxide - Structure, Preparation, Properties, Uses
The p-block, which spans groups 13 to 18, is located on the right side of the normal periodic table. Their electrical configuration is ns2 np1–6 in general. Despite being the first element in group 18, helium is not part of the p-block. Except for the first row, each row in the table has six p-elements. The only block with all three categories of e
8 min read