# Persistent Segment Tree | Set 1 (Introduction)

Prerequisite :Segment Tree Persistency in Data Structure

Segment Tree is itself a great data structure that comes into play in many cases. In this post we will introduce the concept of Persistency in this data structure. Persistency, simply means to retain the changes. But obviously, retaining the changes cause extra memory consumption and hence affect the Time Complexity.

Our aim is to apply persistency in segment tree and also to ensure that it does not take more than **O(log n) time and space** for each change.

Let’s think in terms of versions i.e. for each change in our segment tree we create a new version of it.

We will consider our initial version to be Version-0. Now, as we do any update in the segment tree we will create a new version for it and in similar fashion track the record for all versions.

But creating the whole tree for every version will take O(n log n) extra space and O(n log n) time. So, this idea runs out of time and memory for large number of versions.

Let’s exploit the fact that for each new update(say point update for simplicity) in segment tree, At max logn nodes will be modified. So, our new version will only contain these log n new nodes and rest nodes will be the same as previous version. Therefore, it is quite clear that for each new version we only need to create these log n new nodes whereas the rest of nodes can be shared from the previous version.

Consider the below figure for better visualization(click on the image for better view) :-

Consider the segment tree with green nodes . Lets call this segment tree as **version-0**. The left child for each node is connected with solid red edge where as the right child for each node is connected with solid purple edge. Clearly, this segment tree consists of 15 nodes.

Now consider we need to make change in the leaf node 13 of version-0.

So, the affected nodes will be – **node 13 , node 6 , node 3 , node 1**.

Therefore, for the new version **(Version-1)** we need to create only these **4 new nodes**.

Now, lets construct version-1 for this change in segment tree. We need a new node 1 as it is affected by change done in node 13. So , we will first create a new** node 1′**(yellow color) . The left child for node 1′ will be the same for left child for node 1 in version-0. So, we connect the left child of node 1′ with node 2 of version-0(red dashed line in figure). Let’s now examine the right child for node 1′ in version-1. We need to create a new node as it is affected . So we create a new node called node 3′ and make it the right child for node 1′(solid purple edge connection).

In the similar fashion we will now examine for **node 3′**. The left child is affected , So we create a new node called **node 6′** and connect it with solid red edge with node 3′ , where as the right child for node 3′ will be the same as right child of node 3 in version-0. So, we will make the right child of node 3 in version-0 as the right child of node 3′ in version-1(see the purple dash edge.)

Same procedure is done for node 6′ and we see that the left child of node 6′ will be the left child of node 6 in version-0(red dashed connection) and right child is newly created node called **node 13′**(solid purple dashed edge).

Each **yellow color node** is a newly created node and dashed edges are the inter-connection between the different versions of the segment tree.

Now, the Question arises : **How to keep track of all the versions?**

– We only need to keep track the first root node for all the versions and this will serve the purpose to track all the newly created nodes in the different versions. For this purpose we can maintain an array of pointers to the first node of segment trees for all versions.

Let’s consider a very basic problem to see how to implement persistence in segment tree

Problem: Given an array A[] and different point update operations.Considering each point operation to create a new version of the array. We need to answer the queries of typeQ v l r :output the sum of elements in range l to r just after the v-th update.

We will create all the versions of the segment tree and keep track of their root node.Then for each range sum query we will pass the required version’s root node in our query function and output the required sum.

**Below is the C++ implementation for the above problem:-**

`// C++ program to implement persistent segment ` `// tree. ` `#include "bits/stdc++.h" ` `using` `namespace` `std; ` ` ` `#define MAXN 100 ` ` ` `/* data type for individual ` ` ` `* node in the segment tree */` `struct` `node ` `{ ` ` ` `// stores sum of the elements in node ` ` ` `int` `val; ` ` ` ` ` `// pointer to left and right children ` ` ` `node* left, *right; ` ` ` ` ` `// required constructors........ ` ` ` `node() {} ` ` ` `node(node* l, node* r, ` `int` `v) ` ` ` `{ ` ` ` `left = l; ` ` ` `right = r; ` ` ` `val = v; ` ` ` `} ` `}; ` ` ` `// input array ` `int` `arr[MAXN]; ` ` ` `// root pointers for all versions ` `node* version[MAXN]; ` ` ` `// Constructs Version-0 ` `// Time Complexity : O(nlogn) ` `void` `build(node* n,` `int` `low,` `int` `high) ` `{ ` ` ` `if` `(low==high) ` ` ` `{ ` ` ` `n->val = arr[low]; ` ` ` `return` `; ` ` ` `} ` ` ` `int` `mid = (low+high) / 2; ` ` ` `n->left = ` `new` `node(NULL, NULL, 0); ` ` ` `n->right = ` `new` `node(NULL, NULL, 0); ` ` ` `build(n->left, low, mid); ` ` ` `build(n->right, mid+1, high); ` ` ` `n->val = n->left->val + n->right->val; ` `} ` ` ` `/** ` ` ` `* Upgrades to new Version ` ` ` `* @param prev : points to node of previous version ` ` ` `* @param cur : points to node of current version ` ` ` `* Time Complexity : O(logn) ` ` ` `* Space Complexity : O(logn) */` `void` `upgrade(node* prev, node* cur, ` `int` `low, ` `int` `high, ` ` ` `int` `idx, ` `int` `value) ` `{ ` ` ` `if` `(idx > high or idx < low or low > high) ` ` ` `return` `; ` ` ` ` ` `if` `(low == high) ` ` ` `{ ` ` ` `// modification in new version ` ` ` `cur->val = value; ` ` ` `return` `; ` ` ` `} ` ` ` `int` `mid = (low+high) / 2; ` ` ` `if` `(idx <= mid) ` ` ` `{ ` ` ` `// link to right child of previous version ` ` ` `cur->right = prev->right; ` ` ` ` ` `// create new node in current version ` ` ` `cur->left = ` `new` `node(NULL, NULL, 0); ` ` ` ` ` `upgrade(prev->left,cur->left, low, mid, idx, value); ` ` ` `} ` ` ` `else` ` ` `{ ` ` ` `// link to left child of previous version ` ` ` `cur->left = prev->left; ` ` ` ` ` `// create new node for current version ` ` ` `cur->right = ` `new` `node(NULL, NULL, 0); ` ` ` ` ` `upgrade(prev->right, cur->right, mid+1, high, idx, value); ` ` ` `} ` ` ` ` ` `// calculating data for current version ` ` ` `// by combining previous version and current ` ` ` `// modification ` ` ` `cur->val = cur->left->val + cur->right->val; ` `} ` ` ` `int` `query(node* n, ` `int` `low, ` `int` `high, ` `int` `l, ` `int` `r) ` `{ ` ` ` `if` `(l > high or r < low or low > high) ` ` ` `return` `0; ` ` ` `if` `(l <= low and high <= r) ` ` ` `return` `n->val; ` ` ` `int` `mid = (low+high) / 2; ` ` ` `int` `p1 = query(n->left,low,mid,l,r); ` ` ` `int` `p2 = query(n->right,mid+1,high,l,r); ` ` ` `return` `p1+p2; ` `} ` ` ` `int` `main(` `int` `argc, ` `char` `const` `*argv[]) ` `{ ` ` ` `int` `A[] = {1,2,3,4,5}; ` ` ` `int` `n = ` `sizeof` `(A)/` `sizeof` `(` `int` `); ` ` ` ` ` `for` `(` `int` `i=0; i<n; i++) ` ` ` `arr[i] = A[i]; ` ` ` ` ` `// creating Version-0 ` ` ` `node* root = ` `new` `node(NULL, NULL, 0); ` ` ` `build(root, 0, n-1); ` ` ` ` ` `// storing root node for version-0 ` ` ` `version[0] = root; ` ` ` ` ` `// upgrading to version-1 ` ` ` `version[1] = ` `new` `node(NULL, NULL, 0); ` ` ` `upgrade(version[0], version[1], 0, n-1, 4, 1); ` ` ` ` ` `// upgrading to version-2 ` ` ` `version[2] = ` `new` `node(NULL, NULL, 0); ` ` ` `upgrade(version[1],version[2], 0, n-1, 2, 10); ` ` ` ` ` `cout << ` `"In version 1 , query(0,4) : "` `; ` ` ` `cout << query(version[1], 0, n-1, 0, 4) << endl; ` ` ` ` ` `cout << ` `"In version 2 , query(3,4) : "` `; ` ` ` `cout << query(version[2], 0, n-1, 3, 4) << endl; ` ` ` ` ` `cout << ` `"In version 0 , query(0,3) : "` `; ` ` ` `cout << query(version[0], 0, n-1, 0, 3) << endl; ` ` ` `return` `0; ` `} ` |

*chevron_right*

*filter_none*

Output:

In version 1 , query(0,4) : 11 In version 2 , query(3,4) : 5 In version 0 , query(0,3) : 10

Note : The above problem can also be solved by processing the queries offline by sorting it with respect to the version and answering the queries just after the corresponding update.

**Time Complexity :** The time complexity will be the same as the query and point update operation in the segment tree as we can consider the extra node creation step to be done in O(1). Hence, the overall Time Complexity per query for new version creation and range sum query will be **O(log n)**.

This article is contributed by **Nitish Kumar**. If you like GeeksforGeeks and would like to contribute, you can also write an article using contribute.geeksforgeeks.org or mail your article to contribute@geeksforgeeks.org. See your article appearing on the GeeksforGeeks main page and help other Geeks.

Please write comments if you find anything incorrect, or you want to share more information about the topic discussed above.

GeeksforGeeks has prepared a complete interview preparation course with premium videos, theory, practice problems, TA support and many more features. Please refer Placement 100 for details

## Recommended Posts:

- Persistent Trie | Set 1 (Introduction)
- Overview of Data Structures | Set 3 (Graph, Trie, Segment Tree and Suffix Tree)
- Cartesian tree from inorder traversal | Segment Tree
- Build a segment tree for N-ary rooted tree
- LIS using Segment Tree
- Segment Tree | Set 1 (Sum of given range)
- Segment Tree | (XOR of a given range )
- Segment Tree | Set 3 (XOR of given range)
- Reconstructing Segment Tree
- Segment tree | Efficient implementation
- Two Dimensional Segment Tree | Sub-Matrix Sum
- Lazy Propagation in Segment Tree | Set 2
- Number of subarrays with GCD = 1 | Segment tree
- Smallest subarray with GCD as 1 | Segment Tree
- Lazy Propagation in Segment Tree