Operators are used to perform operations on values and variables. These are the special symbols that carry out arithmetic and logical computations. The value the operator operates on is known as the Operand.
Table of Content
Python Bitwise Operators
Python bitwise operators are used to perform bitwise calculations on integers. The integers are first converted into binary and then operations are performed on each bit or corresponding pair of bits, hence the name bitwise operators. The result is then returned in decimal format.
Note: Python bitwise operators work only on integers.
| OPERATOR | NAME | DESCRIPTION | SYNTAX |
|---|---|---|---|
| & | Bitwise AND | Result bit 1, if both operand bits are 1; otherwise results bit 0. | x & y |
| | | Bitwise OR | Result bit 1, if any of the operand bit is 1; otherwise results bit 0. | x | y |
| ~ | Bitwise NOT | inverts individual bits | ~x |
| ^ | Bitwise XOR | Results bit 1,if any of the operand bit is 1 but not both, otherwise results bit 0. | x ^ y |
| >> | Bitwise right shift | The left operand's value is moved toward right by the number of bits specified by the right operand. | x>> |
| << | Bitwise left shift | The left operand's value is moved toward left by the number of bits specified by the right operand. | x<< |
Let's understand each operator one by one.
Bitwise AND Operator
The Python Bitwise AND (&) operator takes two equal-length bit patterns as parameters. The two-bit integers are compared. If the bits in the compared positions of the bit patterns are 1, then the resulting bit is 1. If not, it is 0.
Example: Take two bit values X and Y, where X = 7= (111)2 and Y = 4 = (100)2 . Take Bitwise and of both X & y
Note: Here, (111)2 represent binary number.
a = 10
b = 4
# Print bitwise AND operation
print("a & b =", a & b)
Output
a & b = 0Bitwise OR operator
The Python Bitwise OR (|) Operator takes two equivalent length bit designs as boundaries; if the two bits in the looked-at position are 0, the next bit is zero. If not, it is 1.
Example: Take two bit values X and Y, where X = 7= (111)2 and Y = 4 = (100)2 . Take Bitwise OR of both X, Y
a = 10
b = 4
# Print bitwise OR operation
print("a | b =", a | b)
Output
a | b = 14Bitwise XOR Operator
The Python Bitwise XOR (^) Operator also known as the exclusive OR operator, is used to perform the XOR operation on two operands. XOR stands for "exclusive or", and it returns true if and only if exactly one of the operands is true. In the context of bitwise operations, it compares corresponding bits of two operands. If the bits are different, it returns 1; otherwise, it returns 0.
Example: Take two bit values X and Y, where X = 7= (111)2 and Y = 4 = (100)2 . Take Bitwise and of both X & Y
a = 10
b = 4
# print bitwise XOR operation
print("a ^ b =", a ^ b)
Output
a ^ b = 14Bitwise NOT Operator
The preceding three bitwise operators are binary operators, necessitating two operands to function. However, unlike the others, this operator operates with only one operand.
The Python Bitwise Not (~) Operator works with a single value and returns its one’s complement. This means it toggles all bits in the value, transforming 0 bits to 1 and 1 bits to 0, resulting in the one’s complement of the binary number.
Example: Take two bit values X and Y, where X = 5= (101)2 . Take Bitwise NOT of X.
a = 10
b = 4
# Print bitwise NOT operation
print("~a =", ~a)
Output
~a = -11
Bitwise Shift
These operators are used to shift the bits of a number left or right thereby multiplying or dividing the number by two respectively. They can be used when we have to multiply or divide a number by two.
Python Bitwise Right Shift
Shifts the bits of the number to the right and fills 0 on voids left( fills 1 in the case of a negative number) as a result. Similar effect as of dividing the number with some power of two.
Example 1: a = 10 = 0000 1010 (Binary) a >> 1 = 0000 0101 = 5 Example 2: a = -10 = 1111 0110 (Binary) a >> 1 = 1111 1011 = -5
a = 10
b = -10
# print bitwise right shift operator
print("a >> 1 =", a >> 1)
print("b >> 1 =", b >> 1)
Output
a >> 1 = 5
b >> 1 = -5
Python Bitwise Left Shift
Shifts the bits of the number to the left and fills 0 on voids right as a result. Similar effect as of multiplying the number with some power of two.
Example 1: a = 5 = 0000 0101 (Binary) a << 1 = 0000 1010 = 10 a << 2 = 0001 0100 = 20 Example 2: b = -10 = 1111 0110 (Binary) b << 1 = 1110 1100 = -20 b << 2 = 1101 1000 = -40
a = 5
b = -10
# print bitwise left shift operator
print("a << 1 =", a << 1)
print("b << 1 =", b << 1)
Output:
a << 1 = 10
b << 1 = -20Bitwise Operator Overloading
Operator Overloading means giving extended meaning beyond their predefined operational meaning. For example operator + is used to add two integers as well as join two strings and merge two lists. It is achievable because the ‘+’ operator is overloaded by int class and str class. You might have noticed that the same built-in operator or function shows different behavior for objects of different classes, this is called Operator Overloading.
Below is a simple example of Bitwise operator overloading.
# Python program to demonstrate
# operator overloading
class Geek():
def __init__(self, value):
self.value = value
def __and__(self, obj):
print("And operator overloaded")
if isinstance(obj, Geek):
return self.value & obj.value
else:
raise ValueError("Must be a object of class Geek")
def __or__(self, obj):
print("Or operator overloaded")
if isinstance(obj, Geek):
return self.value | obj.value
else:
raise ValueError("Must be a object of class Geek")
def __xor__(self, obj):
print("Xor operator overloaded")
if isinstance(obj, Geek):
return self.value ^ obj.value
else:
raise ValueError("Must be a object of class Geek")
def __lshift__(self, obj):
print("lshift operator overloaded")
if isinstance(obj, Geek):
return self.value << obj.value
else:
raise ValueError("Must be a object of class Geek")
def __rshift__(self, obj):
print("rshift operator overloaded")
if isinstance(obj, Geek):
return self.value >> obj.value
else:
raise ValueError("Must be a object of class Geek")
def __invert__(self):
print("Invert operator overloaded")
return ~self.value
# Driver's code
if __name__ == "__main__":
a = Geek(10)
b = Geek(12)
print(a & b)
print(a | b)
print(a ^ b)
print(a << b)
print(a >> b)
print(~a)
Output:
And operator overloaded
8
Or operator overloaded
14
Xor operator overloaded
8
lshift operator overloaded
40960
rshift operator overloaded
8
Invert operator overloaded
-11Note: To know more about operator overloading click here.