SSC JE Syllabus 2024: The Staff Selection Commission will released the SSC JE Syllabus and Exam Pattern 2024 through the official notification. There will be two papers i.e. Paper 1 and Paper 2 conducted by the Staff Selection Commission. The Paper 1 will be conducted in May-June 2024. Candidates must be familiar with the SSC Junior Engineer Syllabus PDF to prepare only the topics important from the exam perspective.
Apart from the syllabus, they should also check the SSC JE Exam Pattern 2024 to get an idea of the exam format, types of questions asked and marking scheme. This will help them to cover all the aspects of the upcoming SSC JE 2024 Exam. Scroll down the page to get complete details of the SSC JE Syllabus 2024 for all the subjects and revised exam patterns and marking scheme.
Table of Content
SSC JE Syllabus 2024 – Overview
The SSC JE Syllabus 2024 is divided into two papers, i.e. Paper I and Paper II. Paper I and Paper II comprises objective-type multiple-choice questions only and will be held online. Here is the quick overview of the SSC JE Syllabus 2024 shared below for the reference of the candidates.
|
SSC JE Syllabus 2024 Overview |
|
|---|---|
|
Exam Conducting Body |
Staff Selection Commission |
|
Post Name |
Junior Engineer (Civil, Mechanical, and Electrical) |
|
Selection Process |
Paper I, Paper II, and Document Verification |
|
Mode of Exam |
Computer Based Examination |
|
Number of Questions |
|
|
Maximum Marks |
|
|
Negative Marking |
|
|
Salary |
Rs 35400-Rs 112400 |
|
Job Location |
Anywhere in India |
SSC JE Syllabus 2024 for Paper I
The SSC JE Syllabus 2024 for Paper I is divided into three subjects i.e. General Intelligence & Reasoning, General Awareness, and General Engineering (Civil & Structural/Electrical/Mechanical). Here is the SSC JE Paper I Syllabus shared below for the reference of the aspirants.
SSC JE Syllabus 2024 for General Intelligence & Reasoning
The SSC JE Paper I syllabus for General Intelligence and Reasoning covers both verbal and non-verbal type questions. The following topics are covered in the SSC JE Syllabus 2024 for reasoning section.
- Analogies
- Similarities
- Differences
- Space visualization
- Problem solving
- Analysis
- Judgment
- Decision making
- Visual memory
- Discrimination
- Observation
- Relationship concepts
- Arithmetical Reasoning
- Verbal and figure classification
- Arithmetical number series, etc.
SSC JE Syllabus 2024 for General Awareness
The SSC JE Paper I Syllabus for General Awareness assess the candidate’s general awareness of the environment around them and its application to the society. The following topics are included in the SSC JE Syllabus 2024 for General Awareness are shared below. Questions will be related to:
- India and its neighbouring countries
- History
- Culture
- Geography
- Economics
- General Polity
- Scientific Research, etc
SSC JE Syllabus 2024 for General Engineering
The SSC JE Paper I Syllabus 2024 for General Engineering is divided into three parts i.e. Civil & Structural Engineering, Electrical Engineering, Mechanical Engineering. Here are the topics covered in each section of the SSC JE Syllabus 2024 for general engineering shared below.
|
SSC JE Syllabus 2024 for General Engineering |
|
|---|---|
|
Part |
Important Topics |
|
Part-A (Civil Engineering) |
Building Materials, Estimating, Costing and Valuation, Surveying, Soil Mechanics, Hydraulics, Irrigation Engineering, Transportation Engineering, Environmental Engineering. Structural Engineering: Theory of Structures, Concrete Technology, RCC Design, Steel Design. |
|
Part-B (Electrical Engineering) |
Basic concepts, Circuit law, Magnetic Circuit, AC Fundamentals, Measurement and Measuring instruments, Electrical Machines, Fractional Kilowatt Motors and single phase induction Motors, Synchronous Machines, Generation, Transmission and Distribution, Estimation and Costing, Utilization and Electrical Energy, Basic Electronics. |
|
Part-C Mechanical Engineering |
Theory of Machines and Machine Design, Engineering Mechanics and Strength of Materials, Properties of Pure Substances, 1st Law of Thermodynamics, 2nd Law of Thermodynamics, Air standard Cycles for IC Engines, IC Engine Performance, IC Engines Combustion, IC Engine Cooling & Lubrication, Rankine cycle of System, Boilers, Classification, Specification, Fitting & Accessories, Air Compressors & their cycles, Refrigeration cycles, Principle of Refrigeration Plant, Nozzles & Steam Turbines. Properties & Classification of Fluids, Fluid Statics, Measurement of Fluid Pressure, Fluid kinematics, Dynamics of Ideal fluids, Measurement of Flow rate, basic principles, Hydraulic Turbines, Centrifugal Pumps, Classification of steel. |
SSC JE Syllabus 2024 for Paper II
The SSC JE Paper II Syllabus 2024 is divided into three parts i.e. Part A: (Civil & Structural Engineering), Part B: (Electrical Engineering) and Part C: (Mechanical Engineering). Here is the SSC JE Syllabus 2024 for Paper II are shared below for the reference of the aspirants.
SSC JE Paper II Syllabus for Part A (Civil & Structural Engineering)
Here is the SSC JE Syllabus 2024 for Civil & Structural Engineering are shared below for the ease of the aspirants.
- Building Materials: Physical and Chemical properties, classification, standard tests, uses and manufacture/quarrying of materials e.g. building stones, silicate based materials, cement (Portland), asbestos products, timber and wood based products, laminates, bituminous materials, paints, varnishes.
- Estimating, Costing and Valuation: estimate, glossary of technical terms, analysis of rates, methods and unit of measurement, Items of work – earthwork, Brick work (Modular & Traditional bricks), RCC work, Shuttering, Timber work, Painting, Flooring, Plastering, Boundary wall, Brick building, Water Tank, Septic tank, Bar bending schedule, Centre line method, Midsection formula, Trapezoidal formula, Simpson’s rule, Cost estimate of Septic tank, flexible pavements, Tube well, isolates and combined footings, Steel Truss, Piles and pile-caps. Valuation – Value and cost, scrap value, salvage value, assessed value, sinking fund, depreciation and obsolescence, methods of valuation.
- Surveying: Principles of surveying, measurement of distance, chain surveying, working of prismatic compass, compass traversing, bearings, local attraction, plane table surveying, theodolite traversing, adjustment of theodolite, Levelling, Definition of terms used in levelling, contouring, curvature and refraction corrections, temporary and permanent adjustments of dumpy level, methods of contouring, uses of contour map, tachometric survey, curve setting, earth work calculation, advanced surveying equipment
- Soil Mechanics: Origin of soil, phase diagram, Definitions-void ratio, porosity, degree of saturation, water content, specific gravity of soil grains, unit weights, density index and interrelationship of different parameters, Grain size distribution curves and their uses Index properties of soils, Atterberg’s limits, ISI soil classification and plasticity chart Permeability of soil, coefficient of permeability, determination of coefficient of permeability, Unconfined and confined aquifers, etc.
- Hydraulics: Fluid properties, hydrostatics, measurements of flow, Bernoulli’s theorem and its application, flow through pipes, flow in open channels, weirs, flumes, spillways, pumps and turbines
- Irrigation Engineering: Definition, necessity, benefits, 2II effects of irrigation, types and methods of irrigation, Hydrology – Measurement of rainfall, run off coefficient, rain gauge, losses from precipitation – evaporation, infiltration, etc Water requirement of crops, duty, delta and base period, Kharif and Rabi Crops, Command area, Time factor, Crop ratio, Overlap allowance, Irrigation efficiencies Different type of canals, types of canal irrigation, loss of water in canals, etc.
- Transportation Engineering: Highway Engineering – cross sectional elements, geometric design, types of pavements, pavement materials – aggregates and bitumen, different tests, Design of flexible and rigid pavements – Water Bound Macadam (WBM) and Wet Mix Macadam (WMM), Gravel Road, Bituminous construction, Rigid pavement joint, pavement maintenance, Highway drainage, Railway Engineering, etc.
- Environmental Engineering: Quality of water, source of water supply, purification of water, distribution of water, need of sanitation, sewerage systems, circular sewer, oval sewer, sewer appurtenances, sewage treatments Surface water drainage Solid waste management – types, effects, engineered management system Air pollution – pollutants, causes, effects, control Noise pollution – cause, health effects, control, etc.
- Structural Engineering: Theory of structures: Elasticity constants, types of beams – determinate and indeterminate, bending moment and shear force diagrams of simply supported, cantilever and overhanging beams Moment of area and moment of inertia for rectangular & circular sections, bending moment and shear stress for tee, channel and compound sections, chimneys, dams and retaining walls, eccentric loads, slope deflection of simply supported and cantilever beams, critical load and columns, Torsion of circular section
- Concrete Technology: Properties, Advantages and uses of concrete, cement aggregates, importance of water quality, water cement ratio, workability, mix design, storage, batching, mixing, placement, compaction, finishing and curing of concrete, quality control of concrete, hot weather and cold weather concreting, repair and maintenance of concrete structures
- RCC Design: RCC beams-flexural strength, shear strength, bond strength, design of singly reinforced and doubles reinforced beams cantilever beams T-beams, lintels One way and two way slabs, isolated footings Reinforced brick works, columns, staircases, retaining wall, water tanks (RCC design questions may be based on both Limit State and Working Stress methods)
- Steel Design: Steel design and construction of steel columns, beams roof trusses plate girders
SSC JE Paper II Syllabus for Part B (Electrical Engineering)
Here is the SSC JE Syllabus 2024 for Electrical Engineering are shared below for the ease of the aspirants.
- Basic concepts: Concepts of resistance, inductance, capacitance, and various factors affecting them Concepts of current, voltage, power, energy and their units
- Circuit law: Kirchhoff’s law, Simple Circuit solution using network theorems
- Magnetic Circuit: Concepts of flux, mmf, reluctance, Different kinds of magnetic materials, Magnetic calculations for conductors of different configuration e.g. straight, circular, solenoidal, etc Electromagnetic induction, self and mutual induction
- AC Fundamentals: Instantaneous, peak, RMS and average values of alternating waves, Representation of sinusoidal waveform, simple series and parallel AC Circuits consisting of RL and C, Resonance, Tank Circuit Polyphase system – star and delta connection, 3 phase power, DC and sinusoidal response of R-Land R-Circuit
- Measurement and measuring instruments: Measurement of power (1 phase and 3 phase, both active and reactive) and energy, 2 wattmeter method of 3 phase power measurement, Measurement of frequency and phase angle Ammeter and voltmeter (both moving oil and moving iron type), extension of range wattmeter, Multimeters, Megger, Energy meter AC Bridges Use of CRO, Signal Generator, CT, PT and their uses Earth Fault detection
- Electrical Machines : (a) DC Machine – Construction, Basic Principles of DC motors and generators, their characteristics, speed control and starting of DC Motors Method of braking motor, Losses and efficiency of DC Machines (b) 1 phase and 3 phase transformers – Construction, Principles of operation, equivalent circuit, voltage regulation, OC and SC Tests, Losses and efficiency Effect of voltage, frequency and wave form on losses Parallel operation of 1 phase /3 phase transformers Auto transformers (c) 3 phase induction motors, rotating magnetic field, principle of operation, equivalent circuit, torque-speed characteristics, starting and speed control of 3 phase induction motors Methods of braking, effect of voltage and frequency variation on torque speed characteristics. Fractional Kilowatt Motors and Single Phase Induction Motors: Characteristics and applications
- Synchronous Machines – Generation of 3-phase emf armature reaction, voltage regulation, parallel operation of two alternators, synchronizing, control of active and reactive power Starting and applications of synchronous motors
- Generation, Transmission and Distribution – Different types of power stations, Load factor, diversity factor, demand factor, cost of generation, inter-connection of power stations Power factor improvement, various types of tariffs, types of faults, short circuit current for symmetrical faults Switchgears – rating of circuit breakers, Principles of arc extinction by oil and air, HRC Fuses, Protection against earth leakage / over current, etc. Buchholz relay, Merz-Price system of protection of generators & transformers, protection of feeders and bus bars Lightning arresters, various transmission and distribution system, comparison of conductor materials, efficiency of different system Cable – Different type of cables, cable rating and derating factor
- Estimation and costing : Estimation of lighting scheme, electric installation of machines and relevant IE rules Earthing practices and IE Rules
- Utilization of Electrical Energy : Illumination, Electric heating, Electric welding, Electroplating, Electric drives and motors
- Basic Electronics : Working of various electronic devices e.g. P N Junction diodes, Transistors (NPN and PNP type), BJT and JFET Simple circuits using these devices.
SSC JE Paper II Syllabus for Part C (Mechanical Engineering)
Here is the SSC JE Syllabus 2024 for Mechanical Engineering are shared below for the ease of the aspirants.
- Theory of Machines and Machine Design: Concept of simple machine, Four bar linkage and link motion, Flywheels and fluctuation of energy, Power transmission by belts – V-belts and Flat belts, Clutches – Plate and Conical clutch, Gears – Type of gears, gear profile and gear ratio calculation, Governors – Principles and classification, Riveted joint, Cams, Bearings, Friction in collars and pivots
- Engineering Mechanics and Strength of Materials: Equilibrium of Forces, Law of motion, Friction, Concepts of stress and strain, Elastic limit and elastic constants, Bending moments and shear force diagram, Stress in composite bars, Torsion of circular shafts, Buckling of columns–Euler’s and Rankine’s theories, Thin walled pressure vessels
- Thermal Engineering: Properties of Pure Substances: p-v & P-T diagrams of pure substance like H2O, Introduction of steam table with respect to steam generation process; definition of saturation, wet & superheated status Definition of dryness fraction of steam, degree of superheat of steam H-s chart of steam (Mollier Chart)
- 1st Law of Thermodynamics: Definition of stored energy & internal energy, 1st Law of Thermodynamics of cyclic process, Non Flow Energy Equation, Flow Energy & Definition of Enthalpy, Conditions for Steady State Steady Flow; Steady State Steady Flow Energy Equation.
- 2nd Law of Thermodynamics: Definition of Sink, Source Reservoir of Heat, Heat Engine, Heat Pump & Refrigerator; Thermal Efficiency of Heat Engines & co-efficient of performance of Refrigerators, Kelvin – Planck & Clausius Statements of 2nd Law of Thermodynamics, Absolute or Thermodynamic Scale of temperature, Clausius Integral, Entropy, Entropy change calculation of ideal gas processes Carnot Cycle & Carnot Efficiency, PMM-2; definition & its impossibility
- Air standard Cycles for IC engines: Otto cycle; plot on P-V, T-S Planes; Thermal Efficiency, Diesel Cycle; Plot on P-V, T-S planes; Thermal efficiency. IC Engine Performance, IC Engine Combustion, IC Engine Cooling & Lubrication
- Rankine cycle of steam: Simple Rankine cycle plot on P-V, T-S, h-s planes, Rankine cycle efficiency with & without pump work Boilers; Classification; Specification; Fittings & Accessories: Fire Tube & Water Tube Boilers. Air Compressors & their cycles; Refrigeration cycles; Principle of a Refrigeration Plant; Nozzles & Steam Turbines
- Fluid Mechanics & Machinery:
- Properties & Classification of Fluid: ideal & real fluids, Newton’s law of viscosity, Newtonian and Non-Newtonian fluids, compressible and incompressible fluids
- Fluid Statics: Pressure at a point Measurement of Fluid Pressure: Manometers, U-tube, Inclined tube
- Fluid Kinematics: Streamline, laminar & turbulent flow, external & internal flow, continuity equation
- Dynamics of ideal fluids: Bernoulli’s equation, Total head; Velocity head;
- Pressure head: Application of Bernoulli’s equitation
- Measurement of Flow rate Basic Principles: Venturimeter, Pilot tube, Orifice meter
- Hydraulic Turbines: Classifications, Principles Centrifugal Pumps: Classifications, Principles, Performance Production Engineering:
- Classification of Steels : mild steel & alloy steel, Heat treatment of steel, Welding – Arc Welding, Gas Welding, Resistance Welding, Special Welding Techniques i.e. TIG, MIG, etc (Brazing & Soldering), Welding Defects & Testing; NDT, Foundry & Casting – methods, defects, different casting processes, Forging, Extrusion, etc, Metal cutting principles, cutting tools, Basic Principles of machining with (i) Lathe (ii) Milling (iii) Drilling (iv) Shaping (v) Grinding, Machines, tools & manufacturing processes
Weightage of SSC JE Syllabus 2024
SSC has released revised SSC JE Exam Pattern 2024 through the official notification. Candidates must be familiar with the SSC JE revised exam pattern 2024 to know the paper format, question type, number of section, and marking scheme. Check the weightage of SSC JE Syllabus 2024 for Paper I and Paper II shared below.
- The SSC JE Paper I and II will be conducted in online mode i.e. Computer Based Test.
- The Paper I & II comprises objective type multiple choice questions only.
- The medium of exam will be Hindi & English.
- There shall be negative marking of 0.25 marks for every wrong answer in Paper I and 1 mark in Paper II for every incorrect answer.
|
Paper |
Mode of Exam |
Subject |
Number of Question |
Maximum Marks |
Duration |
|---|---|---|---|---|---|
|
Paper I |
Computer Based Examination |
General Intelligence and Reasoning |
50 |
50 |
2 Hours (2 Hour and 40 minutes for the scribe candidates) |
|
General Awareness |
50 |
50 |
|||
|
Part A: General Engineering (Civil & Structural Engineering) Part B: General Engineering (Electrical Engineering) Part C: General Engineering (Mechanical Engineering) |
100 |
100 |
|||
|
Paper II |
Computer Based Exam |
Part A: General Engineering (Civil & Structural Engineering) Or Part B: General Engineering (Electrical Engineering) Or Part C: General Engineering (Mechanical Engineering) |
100 |
300 |
2 Hours (2 Hour and 40 minutes for the scribe candidates) |
SSC JE Syllabus 2024: Download Free PDF
Below mentioned is the revised Syllabus for SSC JE exam in the PDF (FREE Download):
|
SSC JE Syllabus 2024 PDF |
|---|
SSC JE Preparation Books
Listed below are the preparation books and their author’s name:
|
Books |
Author |
|---|---|
|
SSC (CPWD/CWC/MES) General Intelligence & Reasoning General Awareness for Junior Engineers Guide |
GKP |
|
SSC Junior Engineers (Mechanical) Exam Guide (Popular Master Guide) |
RPH Editorial Board |
|
SSC Junior Engineer Civil & Structural Recruitment Exam Guide 3rd Edition |
Disha Experts |
|
SSC JE Electrical Engineering for Junior Engineers Previous Year Solved Papers (2008-18), 2018-19 for Paper I |
GKP |
|
General Knowledge |
Manohar Pandey |
Conclusion
Hope you are well aware of the SSC JE Syllabus 2024 now. To know more about such exams, its preparation, study material and more, stay tuned with us.
FAQs on SSC JE Syllabus
1. What is the SSC JE Exam?
The SSC JE Exam is conducted by the Staff Selection Commission for recruitment of Junior Engineers in various engineering disciplines.
2. What are the subjects covered in the SSC JE Syllabus for Paper I?
Paper I includes General Intelligence & Reasoning, General Awareness, and General Engineering (Civil & Structural/Electrical/Mechanical).
3. What is the format of the SSC JE Paper I?
Paper I is a computer-based exam consisting of objective-type multiple-choice questions.
4. Are there any negative markings in the SSC JE Exam?
Yes, in Paper I, there is a negative marking of 0.25 marks for each wrong answer.
5. What topics are included in the General Engineering section of Paper I?
The General Engineering section is divided into Civil & Structural Engineering, Electrical Engineering, and Mechanical Engineering, each covering specific topics related to the field.
6. What is the structure of SSC JE Paper II?
Paper II is a descriptive paper specific to the candidate’s chosen engineering discipline, focusing on in-depth knowledge of the subject.
7. How can candidates prepare for the SSC JE Exam?
Candidates should thoroughly study the syllabus, practice previous years’ question papers, and refer to recommended preparation books.
8. Where can candidates find more information and updates about the SSC JE Exam?
Candidates can visit the official SSC website or follow reliable educational platforms for the latest updates and study materials.