p5.js quadraticVertex() Function

The quadraticVertex() function in p5.js is used to specify the vertex coordinates used to draw a quadratic bezier curve. Every call to this function defines the position of one control point and one anchor point of the bezier curve.

This function can only be used between beginShape() and endShape(). It must be prefaced with a call to the vertex() function to set the first anchor point when called with beginShape() for the first time.

The function expects four parameters in 2D mode and six parameters (which includes z coordinates) in 3D mode. Both the 2D and 3D modes can be used for drawing in the WebGL mode.

Syntax:

quadraticVertex( cx, cy, x3, y3 )

OR

quadraticVertex( cx, cy, cz, x3, y3, z3 )

Parameters: This function accepts six parameters as mentioned above and described below:

• cx: It is a number that specifies the x-coordinate of the control point.
• cy: It is a number that specifies the y-coordinate of the control point.
• x3: It is a number that specifies the x-coordinate of the anchor point.
• y3: It is a number that specifies the y-coordinate of the anchor point.
• cz: It is a number that specifies the z-coordinate of the control point. It is used in the WebGL mode.
• z3: It is a number that specifies the z-coordinate of the anchor point. It is used in the WebGL mode.

The examples below illustrates the quadraticVertex() function in p5.js:

Example 1:

function setup() {
  createCanvas(500, 300);
  textSize(16);
}

function draw() {
  background("green");
  fill("black");
  text(
    "The bezier below is made using bezierVertex()"+
    " function in Canvas",
    10,
    20
  );
  text("Red fill color is used to denote anchor"+
       " points", 10, 40);
  text("Blue fill color is used to denote control"+
       " points", 10, 60);

  // Define the points
  // First Anchor Point
  let p1 = { x: 80, y: 240 };

  // First Control Point
  let p2 = { x: 200, y: 100 };

  // Second Anchor Point
  let p3 = { x: 300, y: 200 };

  // Second Control Point
  let p4 = { x: 400, y: 200 };

  // Third Anchor Point
  let p5 = { x: 400, y: 100 };

  noFill();

  // Start the quadratic bezier
  beginShape();

  // Specify the first anchor point
  // using vertex()
  vertex(p1.x, p1.y);

  // Use the quadraticVertex() function
  // to define the rest of the points
  quadraticVertex(p2.x, p2.y, p3.x, p3.y);
  quadraticVertex(p4.x, p4.y, p5.x, p5.y);
  endShape();

  // Draw circles for demonstration
  fill("red");
  circle(p1.x, p1.y, 10);

  fill("blue");
  circle(p2.x, p2.y, 10);

  fill("red");
  circle(p3.x, p3.y, 10);

  fill("blue");
  circle(p4.x, p4.y, 10);

  fill("red");
  circle(p5.x, p5.y, 10);
}

Output:

Example 2:

let newFont;

function preload() {
  newFont = loadFont("fonts/Montserrat.otf");
}

function setup() {
  createCanvas(500, 300, WEBGL);
  textFont(newFont, 14);
}

function draw() {
  translate(-width / 2, -height / 2);

  background("green");
  fill("black");
  text(
    "The bezier below is made using bezierVertex()"+
    " function in Canvas",
    10,
    20
  );

  // Define the points
  // First Anchor Point
  let p1 = { x: 80, y: 240, z: 10 };

  // First Control Point
  let p2 = { x: 250, y: 100, z: 100 };

  // Second Anchor Point
  let p3 = { x: 300, y: 200, z: 10 };

  // Second Control Point
  let p4 = { x: 300, y: 250, z: 200 };

  // Third Anchor Point
  let p5 = { x: 400, y: 100, z: 10 };

  // Start the quadratic bezier
  beginShape();

  // Specify the first anchor point
  // using vertex()
  vertex(p1.x, p1.y, p1.z);

  // Use the quadraticVertex() function
  // to define the rest of the points
  quadraticVertex(p2.x, p2.y, p2.z, p3.x, p3.y, p3.z);
  quadraticVertex(p4.x, p4.y, p4.z, p5.x, p5.y, p5.z);
  endShape();
}

Output:

Online editor: https://editor.p5js.org/

Environment Setup: https://www.geeksforgeeks.org/p5-js-soundfile-object-installation-and-methods/amp/

Reference: https://p5js.org/reference/#/p5/quadraticVertex