IIR stands for Infinite Impulse Response, It is one of the striking features of many linear-time invariant systems that are distinguished by having an impulse response h(t)/h(n) which does not become zero after some point but instead continues infinitely.
What is IIR Chebyshev Filter?
IIR Chebyshev is a filter that is linear-time invariant filter just like the Butterworth however, it has a steeper roll off compared to the Butterworth Filter. Chebyshev Filter is further classified as Chebyshev Type-I and Chebyshev Type-II according to the parameters such as pass band ripple and stop ripple.
How is Chebyshev Filter different from Butterworth?
Chebyshev Filter has a steeper roll-off compared to the Butterworth Filter.
What is Chebyshev Type-I Filter?
Chebyshev Type-I minimizes the absolute difference between the ideal and actual frequency response over the entire passband by incorporating an equal ripple in the passband.
The specifications are as follows:
- Pass band frequency: 1400-2100 Hz
- Stop band frequency: 1050-24500 Hz
- Pass band ripple: 0.4dB
- Stop band attenuation: 50 dB
- Sampling frequency: 7 kHz
We will plot the magnitude, phase, impulse, step response of the filter.
Step-by-step Approach:
Step 1: Importing all the necessary libraries.
import numpy as np
import scipy.signal as signal
import matplotlib.pyplot as plt
|
Step 2:Defining the user defined functions such as mfreqz() and impz().
def mfreqz(b, a, Fs):
# Compute frequency response of the filter
# using signal.freqz function
wz, hz = signal.freqz(b, a)
# Calculate Magnitude from hz in dB
Mag = 20 * np.log10( abs (hz))
# Calculate phase angle in degree from hz
Phase = np.unwrap(np.arctan2(np.imag(hz), np.real(hz))) * ( 180 / np.pi)
# Calculate frequency in Hz from wz
Freq = wz * Fs / ( 2 * np.pi)
# Plot filter magnitude and phase responses using subplot.
fig = plt.figure(figsize = ( 10 , 6 ))
# Plot Magnitude response
sub1 = plt.subplot( 2 , 1 , 1 )
sub1.plot(Freq, Mag, 'r' , linewidth = 2 )
sub1.axis([ 1 , Fs / 2 , - 100 , 5 ])
sub1.set_title( 'Magnitude Response' , fontsize = 20 )
sub1.set_xlabel( 'Frequency [Hz]' , fontsize = 20 )
sub1.set_ylabel( 'Magnitude [dB]' , fontsize = 20 )
sub1.grid()
# Plot phase angle
sub2 = plt.subplot( 2 , 1 , 2 )
sub2.plot(Freq, Phase, 'g' , linewidth = 2 )
sub2.set_ylabel( 'Phase (degree)' , fontsize = 20 )
sub2.set_xlabel(r 'Frequency (Hz)' , fontsize = 20 )
sub2.set_title(r 'Phase response' , fontsize = 20 )
sub2.grid()
plt.subplots_adjust(hspace = 0.5 )
fig.tight_layout()
plt.show()
# Define impz(b,a) to calculate impulse response # and step response of a system # input: b= an array containing numerator coefficients, #a= an array containing denominator coefficients def impz(b, a):
# Define the impulse sequence of length 60
impulse = np.repeat( 0. , 60 )
impulse[ 0 ] = 1.
x = np.arange( 0 , 60 )
# Compute the impulse response
response = signal.lfilter(b, a, impulse)
# Plot filter impulse and step response:
fig = plt.figure(figsize = ( 10 , 6 ))
plt.subplot( 211 )
plt.stem(x, response, 'm' , use_line_collection = True )
plt.ylabel( 'Amplitude' , fontsize = 15 )
plt.xlabel(r 'n (samples)' , fontsize = 15 )
plt.title(r 'Impulse response' , fontsize = 15 )
plt.subplot( 212 )
step = np.cumsum(response)
# Compute step response of the system
plt.stem(x, step, 'g' , use_line_collection = True )
plt.ylabel( 'Amplitude' , fontsize = 15 )
plt.xlabel(r 'n (samples)' , fontsize = 15 )
plt.title(r 'Step response' , fontsize = 15 )
plt.subplots_adjust(hspace = 0.5 )
fig.tight_layout()
plt.show()
|
Step 3:Define variables with the given specifications of the filter.
# Given specification Fs = 7000 # Sampling frequency in Hz
fp = np.array([ 1400 , 2100 ]) # Pass band frequency in Hz
fs = np.array([ 1050 , 2450 ]) # Stop band frequency in Hz
Ap = 0.4 # Pass band ripple in dB
As = 50 # stop band attenuation in dB
|
Step 4: Computing the cut-off frequency
# Compute pass band and stop band edge frequencies wp = fp / (Fs / 2 ) # Normalized passband edge frequencies w.r.t. Nyquist rate
ws = fs / (Fs / 2 ) # Normalized stopband edge frequencies
|
Step 5: Compute cut-off frequency & order
# Compute order of the Chebyshev type-1 filter using signal.cheb1ord N, wc = signal.cheb1ord(wp, ws, Ap, As)
# Print the order of the filter and cutoff frequencies print ( 'Order of the filter=' , N)
print ( 'Cut-off frequency=' , wc)
|
Output:
Step 6: Compute the filter co-efficient
# Design digital Chebyshev type-1 filter # using signal.cheby1 function z, p = signal.cheby1(N, Ap, wc, 'bandpass' )
# Print numerator and denomerator coefficients # of the filter print ( 'Numerator Coefficients:' , z)
print ( 'Denominator Coefficients:' , p)
|
Output:
Step 7: Plotting the Magnitude & Phase Response
# Call mfreqz to plot the magnitude and phase response mfreqz(z, p, Fs) |
Output:
Step 8: Plotting the Impulse and Step Response
# Call impz function to plot impulse # and step response of the filter impz(z,p) |
Output:
Full Code:
# import required library import numpy as np
import scipy.signal as signal
import matplotlib.pyplot as plt
def mfreqz(b, a, Fs):
# Compute frequency response of the filter
# using signal.freqz function
wz, hz = signal.freqz(b, a)
# Calculate Magnitude from hz in dB
Mag = 20 * np.log10( abs (hz))
# Calculate phase angle in degree from hz
Phase = np.unwrap(np.arctan2(np.imag(hz), np.real(hz))) * ( 180 / np.pi)
# Calculate frequency in Hz from wz
Freq = wz * Fs / ( 2 * np.pi)
# Plot filter magnitude and phase responses using subplot.
fig = plt.figure(figsize = ( 10 , 6 ))
# Plot Magnitude response
sub1 = plt.subplot( 2 , 1 , 1 )
sub1.plot(Freq, Mag, 'r' , linewidth = 2 )
sub1.axis([ 1 , Fs / 2 , - 100 , 5 ])
sub1.set_title( 'Magnitude Response' , fontsize = 20 )
sub1.set_xlabel( 'Frequency [Hz]' , fontsize = 20 )
sub1.set_ylabel( 'Magnitude [dB]' , fontsize = 20 )
sub1.grid()
# Plot phase angle
sub2 = plt.subplot( 2 , 1 , 2 )
sub2.plot(Freq, Phase, 'g' , linewidth = 2 )
sub2.set_ylabel( 'Phase (degree)' , fontsize = 20 )
sub2.set_xlabel(r 'Frequency (Hz)' , fontsize = 20 )
sub2.set_title(r 'Phase response' , fontsize = 20 )
sub2.grid()
plt.subplots_adjust(hspace = 0.5 )
fig.tight_layout()
plt.show()
# Define impz(b,a) to calculate impulse response # and step response of a system # input: b= an array containing numerator coefficients, # a= an array containing denominator coefficients def impz(b, a):
# Define the impulse sequence of length 60
impulse = np.repeat( 0. , 60 )
impulse[ 0 ] = 1.
x = np.arange( 0 , 60 )
# Compute the impulse response
response = signal.lfilter(b, a, impulse)
# Plot filter impulse and step response:
fig = plt.figure(figsize = ( 10 , 6 ))
plt.subplot( 211 )
plt.stem(x, response, 'm' , use_line_collection = True )
plt.ylabel( 'Amplitude' , fontsize = 15 )
plt.xlabel(r 'n (samples)' , fontsize = 15 )
plt.title(r 'Impulse response' , fontsize = 15 )
plt.subplot( 212 )
step = np.cumsum(response) # Compute step response of the system
plt.stem(x, step, 'g' , use_line_collection = True )
plt.ylabel( 'Amplitude' , fontsize = 15 )
plt.xlabel(r 'n (samples)' , fontsize = 15 )
plt.title(r 'Step response' , fontsize = 15 )
plt.subplots_adjust(hspace = 0.5 )
fig.tight_layout()
plt.show()
# Given specification Fs = 7000 # Sampling frequency in Hz
fp = np.array([ 1400 , 2100 ]) # Pass band frequency in Hz
fs = np.array([ 1050 , 2450 ]) # Stop band frequency in Hz
Ap = 0.4 # Pass band ripple in dB
As = 50 # stop band attenuation in dB
# Compute pass band and stop band edge frequencies wp = fp / (Fs / 2 ) # Normalized passband edge frequencies w.r.t. Nyquist rate
ws = fs / (Fs / 2 ) # Normalized stopband edge frequencies
# Compute order of the Chebyshev type-1 # filter using signal.cheb1ord N, wc = signal.cheb1ord(wp, ws, Ap, As)
# Print the order of the filter and cutoff frequencies print ( 'Order of the filter=' , N)
print ( 'Cut-off frequency=' , wc)
# Design digital Chebyshev type-1 filter using # signal.cheby1 function z, p = signal.cheby1(N, Ap, wc, 'bandpass' )
# Print numerator and denomerator coefficients of the filter print ( 'Numerator Coefficients:' , z)
print ( 'Denominator Coefficients:' , p)
# Call mfreqz to plot the magnitude and phase response mfreqz(z, p, Fs) # Call impz function to plot impulse and # step response of the filter impz(z, p) |
Output: