Prerequisite – Wireless Communication | Set 1
Basic Service Set :
We know that wireless communication takes place over the Air. To regulate connection to devices, we need to make every wireless service area a closed group of mobile devices that form around a fixed device. Before mobile devices start data communication, they must advertise their capabilities, and then permission to join should be granted. There is a term defined to such arrangement, IEEE calls this standard a Basic service set (BSS).
At the center of every BSS, there is an access point (AP), it provides services that are necessary to form the infrastructure of Wireless communication. The AP operates in an infrastructure mode and uses a single wireless channel. All devices that want to connect to AP must use that same channel.
Because the operation of BSS depends on AP, BSS is bounded to the area covered by the AP i.e, the area up to which AP’s signal is reachable. This area is called the Basic Service Area (BSA) or cell. The cell is usually a circular shape with the center as AP. The AP serves as a single point of contact for the BSS. The AP uses a unique BSS identifier (BSSID) based on its own MAC address to advertise it’s existence to all devices in the cell.
The AP also advertises a human-readable text string called Service Set identifier (SSID) to uniquely identify the AP. You can say BSSID as a machine-readable unique tag to identify a wireless service and SSID a human-readable service tag.
Membership of mobile devices with BSS is called Association. Once associated, the device becomes a BSS client or an 802.11 station (STA). As long as devices are connected to AP, all data communication passes through AP using BSSID as a source and destination address. You can think why all traffic must pass through AP? They can simply communicate with other devices directly without AP as a middleman. If we don’t do so then the whole point of wireless service will go in vain. Sending data through AP make it stable and controllable
An AP in wireless infrastructure usually connected back to the switched networks. BSS has a limited signal coverage area, (BSA). To extend the signal coverage, we can add additional AP but in some scenarios, it is not possible to add additional AP. The solution in such a situation is a Repeater. The repeater is just an AP configured in Repeater mode. A wireless repeater takes a signal as an input and retransmits signals in a new cell around Repeater. The repeater uses two transmitters and receiver to keep the original and repeated signals isolated on a different channel.
Attention reader! Don’t stop learning now. Get hold of all the important CS Theory concepts for SDE interviews with the CS Theory Course at a student-friendly price and become industry ready.
- Wireless Communication | Set 1
- Wireless Communication | Set 3
- Differences between Wireless Adhoc Network and Wireless Sensor Network
- Traditional wireless mobile communication
- Advantages and disadvantages of Wireless Communication
- Generations of wireless communication
- Difference between Satellite Communication and Optical Communication
- Difference between Analog Communication and Digital Communication
- Wireless Security | Set 1
- Collision Avoidance in wireless networks
- Modes of Wireless Connectivity
- Types of Wireless and Mobile Device Attacks
- Wireless Local Loop
- Wireless Application Protocol
- Securing wireless and mobile devices
- Wireless Sensor Network (WSN)
- Selective forwarding Attack in wireless Sensor Network
- Wormhole Attack in Wireless Sensor Networks
- Wireless Body Area Network
- Sinkhole Attack in Wireless Sensor Networks
If you like GeeksforGeeks and would like to contribute, you can also write an article using contribute.geeksforgeeks.org or mail your article to firstname.lastname@example.org. See your article appearing on the GeeksforGeeks main page and help other Geeks.
Please Improve this article if you find anything incorrect by clicking on the "Improve Article" button below.