Before talking about wireless medium, we need to talk about the wired medium. Wired network is a bounded medium. Data travel over a path that a wire or cable takes.In modern era of advanced and enormous no of devices, wired medium of communication imposes a restriction on fluent communication. There are various problems with wired networks. Consider a situation, you want to connect to 10 or more devices around you.
You need exact same no of ports to be able to connect to devices but large no of ports seems to be impractical but with wireless network, it can be easily done
As its name, wireless network eliminates needs to be tethered with wire or cable. Convenience and Mobility becomes its main characteristics. Many different wireless devices can connect to network easily and seamlessly. As wireless data travel through air, there must be some constraints within which wireless communication takes place.
- All wireless devices must follow a common standard i.e, IEEE 802.11
- Wireless coverage must be there where devices are expected to use.
- Wired network comes under IEEE standard 802.3
- wireless network comes under IEEE standard 802.11
IEEE stands for “Institute of Electrical and Electronics Engineers”, is an organization composed of engineers that issues and manages standards for electrical and electronic devices.
Basics of Wireless Communication :
Wireless communication takes places over free space through RF (radio frequency), one device, Transmitter send signal to other device, Receiver. Two devices (transmitter and receiver) must use same frequency (or channel) to be able to communicate with each other. If a large number of wireless devices communicate at same time, radio frequency can cause interference with each other.Interference increases as no of devices increases.
Wireless devices share airtime just like wired devices connect to shared media and share common bandwidth. For effective use of media, all wireless devices operate in half duplex mode to avoid collision or interference. Before the transmission begins, devices following IEEE 802.11 standard must check whether channel is available and clear.
Wireless communication is always half duplex as transmission uses same frequency or channel. To achieve full duplex mode, devices uses different frequency or channel of transmission and
receiving of signals. You can say that wireless communication is Full-duplex but technically it is not.
Radio Frequency :
In free space, the sender (transmitter) send an alternating current into a section of wire (an antenna). This sets up a moving electric and magnetic field that away as travelling waves. The electric and magnetic field moves along each other at a right angle to each other as shown. The signal must keep changing or alternating by cycle up and down to keep electric and magnetic field cyclic and pushing forward. The no of cycles a wave taking in a second is called Frequency of the wave.
frequency = no of cycles per second
Electromagnetic waves do not travel in a straight line. they travel by expanding in all direction away from antenna. Like you have seen waves travelling in water when you drop or throw a stone in a water body.
Frequency Unit Names :
|Hertz||Hz||Cycles per second|
|Megahertz||MHz||1, 000, 000 Hz|
|Gigahertz||GHz||1, 000, 000, 000 Hz|
Attention reader! Don’t stop learning now. Get hold of all the important CS Theory concepts for SDE interviews with the CS Theory Course at a student-friendly price and become industry ready.
- Wireless Communication | Set 3
- Wireless Communication | Set 2
- Differences between Wireless Adhoc Network and Wireless Sensor Network
- Traditional wireless mobile communication
- Advantages and disadvantages of Wireless Communication
- Generations of wireless communication
- Difference between Satellite Communication and Optical Communication
- Difference between Analog Communication and Digital Communication
- Wireless Security | Set 1
- Collision Avoidance in wireless networks
- Modes of Wireless Connectivity
- Types of Wireless and Mobile Device Attacks
- Wireless Local Loop
- Wireless Application Protocol
- Securing wireless and mobile devices
- Wireless Sensor Network (WSN)
- Selective forwarding Attack in wireless Sensor Network
- Wormhole Attack in Wireless Sensor Networks
- Wireless Body Area Network
- Sinkhole Attack in Wireless Sensor Networks
If you like GeeksforGeeks and would like to contribute, you can also write an article using contribute.geeksforgeeks.org or mail your article to firstname.lastname@example.org. See your article appearing on the GeeksforGeeks main page and help other Geeks.
Please Improve this article if you find anything incorrect by clicking on the "Improve Article" button below.