Open In App

Resistors in Series and Parallel Combinations

Improve
Improve
Like Article
Like
Save
Share
Report

Resistors are devices that obstruct the flow of electric current in the circuit. They provide the hindrance to the path of the current which flows in the circuit. Resistors consume the current in any circuit and convert them to other forms of energy as required. Various resistors can be added to the circuits as per our requirements. Two or more resistors can easily be added in particular sequences. The addition of resistors can be achieved using any of the two methods i.e. Series Combination and Parallel Combination. In this article, we will learn about the arrangement of Resistors in Series and Parallel combinations and others in detail.

What is Resistor

Resistors are defined as electric devices that obstruct the free flow of electrons and hence hinder the flow of current.

What is Resistance

Resistance is the property of a device to obstructs the flow of current in the circuit. It is measured in the unit Ohm represented by Ω. Resistance of a material is directly proportional to its length and inversely proportional to its thickness or cross-sectional area.

Components of a Circuit

An electric circuit is made up of various components, some of the various components of the electric circuit are,

  • Conductors (wires)
  • Power Source
  • Load
  • Switch

Generally, copper wires are used as a conductor. Switch are components that control the entry and exit of the current in the circuit. used to make or break a circuit. Resistors are used to control the flow of the electric current in a circuit. Loads are devices that are used in a circuit that consumes electrical energy and converts it into other forms of energy like light, heat, sound, etc. Examples of load include bulbs, speakers, heaters, etc.

Need for a Combination Circuit

In an electric circuit, resistive networks are made by combining various components of circuits together. They can be connected in two ways either in series combination or in parallel combination or in both, i.e. in any electric circuit, we can use both combinations also. These combinations are made to form various complex circuits which are then used for various purposes. We have to make sure that in the end, we must know the total resistance of the circuit to solve our problem.

Now let us learn about resistors, resistance, and their combination in detail below in this article.

Combination of Resistors

Resistors are electrical devices that restrict the flow of current in a circuit. It is an ohmic device, which means that it follows Ohm’s Law V = IR. Most of the circuits have only one resistor, but sometimes more than one resistor can be present in the circuit. In that case, the current flowing through the circuit depends on the equivalent resistance of the combination. These combinations can be arbitrarily complex, but they can be divided into two basic types: 

  • Series Combination
  • Parallel Combination

Resistors in Series

In the figure given below, three resistors are connected in series with the battery of voltage V. In this type of combination, resistors are usually connected in a sequential manner one after another. In Series Combination, the resistors are connected in an end-to-end manner with each other.

 The current through each resistor is the same. The figure on the right side shows the equivalent resistance of the three resistances. In the case of the series combination of resistances, the equivalent resistance is given by the algebraic sum of the individual resistances. The diagram given below shows the resistor added in a series combination.

Resistors in Series

 

The derivation of equivalent resistance for resistors in series is discussed below:

Let V1, V2, and V3 be the voltages across all three resistances. It is known that the current flowing through them is the same. 

V = V1  + V2 + V3 

Expanding the equation, 

IR = IR1  + IR2 + IR3 

IR = I(R1 + R2 + R3)

Equivalent Series Resistance

Thus the equivalent resistance in series is given by the formula mentioned below:

R = R1 + R2 + R3

Resistors in Parallel

In the figure given below, three resistors are shown which are connected in parallel with a battery of voltage V. In this type of connection, the resistors are usually connected on parallel wires originating from a common point. In this case, the voltage through each resistor is the same. The figure on the right side shows the equivalent resistance of the three resistances. The diagram given below shows the resistor added in parallel combination.

Resistors in Parallel

 

The derivation of equivalent resistance for resistors in parallel is discussed below:

The relation between voltage and current is given by, 

V = IR

It can be rewritten as, 

I = V/R

The voltages across individual resistors will be, 

I1 = V/R1 , I2 = V/R2, I3 = V/R3

The total current across all the resistances will be, 

I = I1 + I2 + I3

Substituting the expressions for individual voltages, 

I = V/R1 + V/R2  + V/R3

Let the equivalent resistance be R, 

V/R = V/R1 +V/R2  + V/R3

Upon Simplifying the above equation, the relation becomes, 

\frac{1}{R} = \frac{1}{R_1} +  \frac{1}{R_2} +  \frac{1}{R_3}

In general for resistance R1, R2, R3,…

Equivalent Parallel Resistance

Thus the equivalent resistance in parallel combination is given below:

\frac{1}{R} = \frac{1}{R_1} +  \frac{1}{R_2} +  \frac{1}{R_3} + ....

Points To Remember

Various points to remember from the above discussion include,

A circuit consists of conductors (wires), power sources, loads, resistors, and switches.

  • The entry and exit of the current in the circuit are controlled by the switches.
  • The flow of the electric current in the circuit is managed by the resistors.
  • In a series combination of circuits same current flows in all the resistors. The total or equivalent resistance can be given by,

Rtotal = R1 + R2 + ….. + Rn

  • In a parallel combination of circuits, the voltage is similar in all the resistors. The total or equivalent resistance can be given by,

1 / Rtotal = 1 / R1 + 1 / R2 + ….. + 1 / Rn

Read, More

Solved Examples on Resistors in Series and Parallel Combinations

Example 1: Three resistances of 3, 5, and 10 ohms are connected in series. Find the equivalent resistance for the system. 

Solution: 

The formula for series resistance is given by,

R = R1 + R2 + R3

Given: R1 = 3, R2  = 5 and R3 = 10 

Substituting these values in the equation, 

R = R1 + R2 + R3

 R = 3 + 5 + 10 

 R = 18 Ω

Example 2: Three resistances of 2, 2, and 4 ohms are connected in parallel. Find the equivalent resistance for the system. 

Solution: 

The formula for parallel resistance is given by,

\frac{1}{R} = \frac{1}{R_1} +  \frac{1}{R_2} +  \frac{1}{R_3}

Given: R1 = 2, R2  = 2 and R3 = 4 

Substituting these values in the equation, 

\frac{1}{R} = \frac{1}{R_1} +  \frac{1}{R_2} +  \frac{1}{R_3}

 \frac{1}{R} = \frac{1}{R_1} +  \frac{1}{R_2} +  \frac{1}{R_3}

 \frac{1}{R} = \frac{2 + 2 + 1}{4}

 R = \frac{4}{5}     Ω

Example 3: Find the equivalent resistance for the system shown in the figure below. 

Example 3 of combination of resistors

 

Solution: 

The formula for parallel resistance is given by,

\frac{1}{R} = \frac{1}{R_1} +  \frac{1}{R_2} +  \frac{1}{R_3} + ....

And the formula for series resistance is given by, 

R = R1 + R2 + R3  + ….

This is combination of both parallel and series resistances. 

Substituting these values in the equation, 

R1 = 10 Ω, R2  = 2.5 Ω

R= R1 + R2

R = 10 + 2.5 

R = 12.5

\frac{1}{R} = \frac{1}{R_1} +  \frac{1}{R_2}

 \frac{1}{R} = \frac{1}{12.5} +  \frac{1}{50}

 \frac{1}{R} = \frac{4+1}{50}

 R = 10 Ω

Example 4: Find the equivalent resistance for the system shown in the figure below. 

Example 4 of combination of resistors

 

Solution: 

The formula for parallel resistance is given by,

\frac{1}{R} = \frac{1}{R_1} +  \frac{1}{R_2} +  \frac{1}{R_3} + ....

And the formula for series resistance is given by, 

R = R1 + R2 + R3  + ….

This is combination of both parallel and series resistances. 

Substituting these values in the equation, 

R1 = 8 Ω, R2 = 16 Ω

R= R1 + R2

R = 8 + 16

R = 24

\frac{1}{R} = \frac{1}{R_1} +  \frac{1}{R_2}

 \frac{1}{R} = \frac{1}{24} +  \frac{1}{4}

 \frac{1}{R} = \frac{1 + 6}{24}

 R = 24 / 7 Ω

Example 5: Find the equivalent resistance for the system shown in the figure below. 

Example 5 of combination of resistors

 

Solution:

The formula for parallel resistance is given by,

\frac{1}{R} = \frac{1}{R_1} +  \frac{1}{R_2} +  \frac{1}{R_3} + ....

And the formula for series resistance is given by, 

R = R1 + R2 + R3  + …

The circuit in above diagram has both type of combination

Substituting these values in the parallel combination,

R1 = 20 Ω, R2  = 20 Ω

\frac{1}{R} = \frac{1}{R_1} +  \frac{1}{R_2}

\frac{1}{R} = \frac{1}{20} +  \frac{1}{20}

\frac{1}{R} = \frac{2}{20}

R = \frac{20}{2}

R = 10

R = R1 + R2

R = 10 + 5 

R = 15 Ω

FAQs on Resistors in Series and Parallel Combinations

Q1: What is a Resistor?

Answer:

A resistor is a component of an electric circuit which controls the flow of the current in the electric circuit.

Q2: What is Formula to Calculate the Total Resistance in a Series Combination?

The total resistance in a series combination can be calculated by using the formula discussed below,

Let’s take n resistor R1, R2,….., Rn then their total resistance in series combination (Rtotal) is given as,

Rtotal = R1 + R2 + ,….., + Rn

Q3: What is Formula to Calculate the Total Resistance in a Parallel Combination?

Answer:

The total resistance in a parallel combination can be calculated by using the formula discussed below,

Let’s take n resistor R1, R2,….., Rn then their total resistance in parallel combination (Rtotal) is given as,

1 / Rtotal = 1 / R1 +1 /  R2 + ,….., + 1 / Rn

Q4: What is the Difference between a Series and a Parallel Circuit?

Answer:

For the series circuit, the current in the circuit is uniform and the voltage is linearly divided whereas, for the parallel circuit, the voltage is uniform in the circuit and the current is linearly divided.

Q5: What is the Unit of Resistance?

Answer:

The SI unit for measuring the electric resistance is the ohm. It is represented by the greek symbol, Ω. 1 Ω = 1 V/A

Q6: What is the Current of Resistors in Series?

Answer:

In a series combination, the current passing through each resistor is the same.



Last Updated : 04 Feb, 2024
Like Article
Save Article
Previous
Next
Share your thoughts in the comments
Similar Reads