**What is Recursion?**

The process in which a function calls itself directly or indirectly is called recursion and the corresponding function is called as recursive function. Using recursive algorithm, certain problems can be solved quite easily. Examples of such problems are Towers of Hanoi (TOH), Inorder/Preorder/Postorder Tree Traversals, DFS of Graph, etc.

**A Mathematical Interpretation**

Let us consider a problem that a programmer have to determine the sum of first n natural numbers, there are several ways of doing that but the simplest approach is simply add the numbers starting from 1 to n. So the function simply looks like,

approach(1) – Simply adding one by one

f(n) = 1 + 2 + 3 +……..+ n

but there is another mathematical approach of representing this,

approach(2) – Recursive adding

f(n) = 1 n=1

f(n) = n + f(n-1) n>1

There is a simple difference between the approach (1) and approach(2) and that is in **approach(2)** the function “** f( ) **” itself is being called inside the function, so this phenomenon is named as recursion and the function containing recursion is called recursive function, at the end this is a great tool in the hand of the programmers to code some problems in a lot easier and efficient way.

**What is base condition in recursion?**

In the recursive program, the solution to the base case is provided and the solution of the bigger problem is expressed in terms of smaller problems.

int fact(int n) { if (n < = 1) // base case return 1; else return n*fact(n-1); }

In the above example, base case for n < = 1 is defined and larger value of number can be solved by converting to smaller one till base case is reached.

**How a particular problem is solved using recursion?**

The idea is to represent a problem in terms of one or more smaller problems, and add one or more base conditions that stop the recursion. For example, we compute factorial n if we know factorial of (n-1). The base case for factorial would be n = 0. We return 1 when n = 0.

**Why Stack Overflow error occurs in recursion?**

If the base case is not reached or not defined, then the stack overflow problem may arise. Let us take an example to understand this.

int fact(int n) { // wrong base case (it may cause // stack overflow). if (n == 100) return 1; else return n*fact(n-1); }

If fact(10) is called, it will call fact(9), fact(8), fact(7) and so on but the number will never reach 100. So, the base case is not reached. If the memory is exhausted by these functions on the stack, it will cause a stack overflow error.

**What is the difference between direct and indirect recursion?**

A function fun is called direct recursive if it calls the same function fun. A function fun is called indirect recursive if it calls another function say fun_new and fun_new calls fun directly or indirectly. Difference between direct and indirect recursion has been illustrated in Table 1.

// An example of direct recursionvoid directRecFun() { // Some code.... directRecFun(); // Some code... }// An example of indirect recursionvoid indirectRecFun1() { // Some code... indirectRecFun2(); // Some code... } void indirectRecFun2() { // Some code... indirectRecFun1(); // Some code... }

**What is difference between tailed and non-tailed recursion?**

A recursive function is tail recursive when recursive call is the last thing executed by the function. Please refer tail recursion article for details.

**How memory is allocated to different function calls in recursion?**

When any function is called from main(), the memory is allocated to it on the stack. A recursive function calls itself, the memory for a called function is allocated on top of memory allocated to calling function and different copy of local variables is created for each function call. When the base case is reached, the function returns its value to the function by whom it is called and memory is de-allocated and the process continues.

Let us take the example how recursion works by taking a simple function.

`// A C++ program to demonstrate working of` `// recursion` `#include <bits/stdc++.h>` `using` `namespace` `std;`
`void` `printFun(` `int` `test)`
`{` ` ` `if` `(test < 1)`
` ` `return` `;`
` ` `else` `{`
` ` `cout << test << ` `" "` `;`
` ` `printFun(test - 1); ` `// statement 2`
` ` `cout << test << ` `" "` `;`
` ` `return` `;`
` ` `}`
`}` `// Driver Code` `int` `main()`
`{` ` ` `int` `test = 3;`
` ` `printFun(test);`
`}` |

*chevron_right*

*filter_none*

`// A Java program to demonstrate working of` `// recursion` `class` `GFG {`
` ` `static` `void` `printFun(` `int` `test)`
` ` `{`
` ` `if` `(test < ` `1` `)`
` ` `return` `;`
` ` `else` `{`
` ` `System.out.printf(` `"%d "` `, test);`
` ` `printFun(test - ` `1` `); ` `// statement 2`
` ` `System.out.printf(` `"%d "` `, test);`
` ` `return` `;`
` ` `}`
` ` `}`
` ` `// Driver Code`
` ` `public` `static` `void` `main(String[] args)`
` ` `{`
` ` `int` `test = ` `3` `;`
` ` `printFun(test);`
` ` `}`
`}` `// This code is contributed by` `// Smitha Dinesh Semwal` |

*chevron_right*

*filter_none*

`# A Python 3 program to` `# demonstrate working of` `# recursion` `def` `printFun(test):`
` ` `if` `(test < ` `1` `):`
` ` `return`
` ` `else` `:`
` ` `print` `(test, end` `=` `" "` `)`
` ` `printFun(test` `-` `1` `) ` `# statement 2`
` ` `print` `(test, end` `=` `" "` `)`
` ` `return`
`# Driver Code` `test ` `=` `3`
`printFun(test)` `# This code is contributed by` `# Smitha Dinesh Semwal` |

*chevron_right*

*filter_none*

`// A C# program to demonstrate` `// working of recursion` `using` `System;`
`class` `GFG {`
` ` `// function to demonstrate`
` ` `// working of recursion`
` ` `static` `void` `printFun(` `int` `test)`
` ` `{`
` ` `if` `(test < 1)`
` ` `return` `;`
` ` `else` `{`
` ` `Console.Write(test + ` `" "` `);`
` ` `// statement 2`
` ` `printFun(test - 1);`
` ` `Console.Write(test + ` `" "` `);`
` ` `return` `;`
` ` `}`
` ` `}`
` ` `// Driver Code`
` ` `public` `static` `void` `Main(String[] args)`
` ` `{`
` ` `int` `test = 3;`
` ` `printFun(test);`
` ` `}`
`}` `// This code is contributed by Anshul Aggarwal.` |

*chevron_right*

*filter_none*

`<?php` `// PHP program to demonstrate ` `// working of recursion` `// function to demonstrate ` `// working of recursion` `function` `printFun(` `$test` `)`
`{` ` ` `if` `(` `$test` `< 1)`
` ` `return` `;`
` ` `else`
` ` `{`
` ` `echo` `(` `"$test "` `);`
` ` ` ` `// statement 2`
` ` `printFun(` `$test` `-1); `
` ` ` ` `echo` `(` `"$test "` `);`
` ` `return` `;`
` ` `}`
`}` `// Driver Code` `$test` `= 3;`
`printFun(` `$test` `);`
`// This code is contributed by` `// Smitha Dinesh Semwal.` `?>` |

*chevron_right*

*filter_none*

**Output : **

3 2 1 1 2 3

When **printFun(3)** is called from main(), memory is allocated to **printFun(3)** and a local variable test is initialized to 3 and statement 1 to 4 are pushed on the stack as shown in below diagram. It first prints ‘3’. In statement 2, **printFun(2)** is called and memory is allocated to **printFun(2)** and a local variable test is initialized to 2 and statement 1 to 4 are pushed in the stack. Similarly, **printFun(2)** calls **printFun(1)** and **printFun(1)** calls **printFun(0)**. **printFun(0)** goes to if statement and it return to **printFun(1)**. Remaining statements of **printFun(1) **are executed and it returns to **printFun(2)** and so on. In the output, value from 3 to 1 are printed and then 1 to 3 are printed. The memory stack has been shown in below diagram.

Now, let’s discuss a few practical problems which can be solved by using recursion and understand its basic working. For basic understanding please read the following articles.

Basic understanding of Recursion.**Problem 1: **Write a program and recurrence relation to find the Fibonacci series of n where n>2 . *Mathematical Equation:*

n if n == 0, n == 1; fib(n) = fib(n-1) + fib(n-2) otherwise;

*Recurrence Relation:*

T(n) = T(n-1) + T(n-2) + O(1)

**Recursive program:**

Input:n = 5Output:Fibonacci series of 5 numbers is : 0 1 1 2 3

**Implementation:**

`// C code to implement Fibonacci series` `#include <stdio.h>` `// Function for fibonacci` `int` `fib(` `int` `n)`
`{` ` ` `// Stop condition`
` ` `if` `(n == 0)`
` ` `return` `0;`
` ` `// Stop condition`
` ` `if` `(n == 1 || n == 2)`
` ` `return` `1;`
` ` `// Recursion function`
` ` `else`
` ` `return` `(fib(n - 1) + fib(n - 2));`
`}` `// Driver Code` `int` `main()`
`{` ` ` `// Initialize variable n.`
` ` `int` `n = 5;`
` ` `printf` `(` `"Fibonacci series "`
` ` `"of %d numbers is: "` `,`
` ` `n);`
` ` `// for loop to print the fiboancci series.`
` ` `for` `(` `int` `i = 0; i < n; i++) {`
` ` `printf` `(` `"%d "` `, fib(i));`
` ` `}`
` ` `return` `0;`
`}` |

*chevron_right*

*filter_none*

**Output:**

Fibonacci series of 5 numbers is : 0 1 1 2 3

Here is the recursive tree for input 5 which shows a clear picture of how a big problem can be solved into smaller ones.

fib(n) is a Fibonacci function. The time complexity of the given program can depend on the function call.

fib(n) -> level CBT (UB) -> 2^n-1 nodes -> 2^n function call -> 2^n*O(1) -> T(n) = O(2^n)

For Best Case.

T(n) = θ(2^n\2)

**Working:**

**Problem 2:** Write a program and recurrence relation to find the Factorial of n where n>2 . **Mathematical Eqution:**

1 if n == 0 or n == 1; f(n) = n*f(n-1) if n> 1;

**Recurrence Relation:**

T(n) = 1 for n = 0 T(n) = 1 + T(n-1) for n > 0

**Recursive Program:** **Input:** n = 5 **Output:**

factorial of 5 is: 120**Implementation:**

`// C code to implement factorial` `#include <stdio.h>` `// Factorial function` `int` `f(` `int` `n)`
`{` ` ` `// Stop condition`
` ` `if` `(n == 0 || n == 1)`
` ` `return` `1;`
` ` `// Recursive condition`
` ` `else`
` ` `return` `n * f(n - 1);`
`}` `// Driver code` `int` `main()`
`{` ` ` `int` `n = 5;`
` ` `printf` `(` `"factorial of %d is: %d"` `, n, f(n));`
` ` `return` `0;`
`}` |

*chevron_right*

*filter_none*

**Output:**

factorial of 5 is: 120

**Working:**

**What are the disadvantages of recursive programming over iterative programming?**

Note that both recursive and iterative programs have the same problem-solving powers, i.e., every recursive program can be written iteratively and vice versa is also true. The recursive program has greater space requirements than iterative program as all functions will remain in the stack until the base case is reached. It also has greater time requirements because of function calls and returns overhead.

**What are the advantages of recursive programming over iterative programming?**

Recursion provides a clean and simple way to write code. Some problems are inherently recursive like tree traversals, Tower of Hanoi, etc. For such problems, it is preferred to write recursive code. We can write such codes also iteratively with the help of a stack data structure. For example refer Inorder Tree Traversal without Recursion, Iterative Tower of Hanoi.

**Output based practice problems for beginners:**

Practice Questions for Recursion | Set 1

Practice Questions for Recursion | Set 2

Practice Questions for Recursion | Set 3

Practice Questions for Recursion | Set 4

Practice Questions for Recursion | Set 5

Practice Questions for Recursion | Set 6

Practice Questions for Recursion | Set 7**Quiz on Recursion** **Coding Practice on Recursion:** **All Articles on Recursion**

Recursive Practice Problems with Solutions

This article is contributed by **Sonal Tuteja**. If you like GeeksforGeeks and would like to contribute, you can also write an article using contribute.geeksforgeeks.org or mail your article to contribute@geeksforgeeks.org. See your article appearing on the GeeksforGeeks main page and help other Geeks.

Please write comments if you find anything incorrect, or you want to share more information about the topic discussed above

Attention reader! Don’t stop learning now. Get hold of all the important DSA concepts with the **DSA Self Paced Course** at a student-friendly price and become industry ready.

## Recommended Posts:

- Practice questions for Linked List and Recursion
- Practice Questions for Recursion | Set 3
- Practice Questions for Recursion | Set 2
- Practice Questions for Recursion | Set 4
- Practice Questions for Recursion | Set 5
- Practice Questions for Recursion | Set 6
- Practice Questions for Recursion | Set 7
- Print 1 to 100 in C++, without loop and recursion
- Tail Recursion
- Tail Recursion for Fibonacci
- Print numbers 1 to N using Indirect recursion
- Mutual Recursion with example of Hofstadter Female and Male sequences
- Remove duplicates from a sorted linked list using recursion
- Reverse a Doubly linked list using recursion
- Sum of natural numbers using recursion
- Decimal to binary number using recursion
- Sum of digit of a number using recursion
- Binary to Gray code using recursion
- Product of 2 Numbers using Recursion
- Print alternate nodes of a linked list using recursion