# stdev() method in Python statistics module

Statistics module in Python provides a function known as **stdev() **, which can be used to calculate the standard deviation. stdev() function only calculates standard deviation from a sample of data, rather than an entire population.

To calculate standard deviation of an entire population, another function known as **pstdev()** is used.

* Standard Deviation* is a measure of spread in Statistics. It is used to quantify the measure of spread, variation of a set of data values. It is very much similar to variance, gives the measure of deviation whereas variance provides the squared value.

A low measure of Standard Deviation indicates that the data are less spread out, whereas a high value of Standard Deviation shows that the data in a set are spread apart from their mean average values. A useful property of the standard deviation is that, unlike the variance, it is expressed in the same units as the data.

Standard Deviation is calculated by : where x1, x2, x3.....xn are observed values in sample data, is the mean value of observations and N is the number of sample observations.

Syntax :stdev( [data-set], xbar )Parameters :[data] :An iterable with real valued numbers.xbar(Optional):Takes actual mean of data-set as value.Returnype :Returns the actual standard deviation of the values passed as parameter.Exceptions :StatisticsErroris raised for data-set less than 2 values passed as parameter.Impossible/precision-less valueswhen the value provided asxbardoesn’t match actual mean of the data-set.

**Code #1 :**

## Python3

`# Python code to demonstrate stdev() function` `# importing Statistics module` `import` `statistics` `# creating a simple data - set` `sample ` `=` `[` `1` `, ` `2` `, ` `3` `, ` `4` `, ` `5` `]` `# Prints standard deviation` `# xbar is set to default value of 1` `print` `(` `"Standard Deviation of sample is % s "` ` ` `%` `(statistics.stdev(sample)))` |

**Output :**

Standard Deviation of the sample is 1.5811388300841898

**Code #2 :** Demonstrate stdev() on a varying set of data types

## Python3

`# Python code to demonstrate stdev() ` `# function on various range of datasets` `# importing the statistics module` `from` `statistics ` `import` `stdev` `# importing fractions as parameter values` `from` `fractions ` `import` `Fraction as fr` `# creating a varying range of sample sets` `# numbers are spread apart but not very much` `sample1 ` `=` `(` `1` `, ` `2` `, ` `5` `, ` `4` `, ` `8` `, ` `9` `, ` `12` `)` `# tuple of a set of negative integers` `sample2 ` `=` `(` `-` `2` `, ` `-` `4` `, ` `-` `3` `, ` `-` `1` `, ` `-` `5` `, ` `-` `6` `)` `# tuple of a set of positive and negative numbers` `# data-points are spread apart considerably` `sample3 ` `=` `(` `-` `9` `, ` `-` `1` `, ` `-` `0` `, ` `2` `, ` `1` `, ` `3` `, ` `4` `, ` `19` `)` `# tuple of a set of floating point values` `sample4 ` `=` `(` `1.23` `, ` `1.45` `, ` `2.1` `, ` `2.2` `, ` `1.9` `)` `# Print the standard deviation of ` `# following sample sets of observations` `print` `(` `"The Standard Deviation of Sample1 is % s"` ` ` `%` `(stdev(sample1)))` ` ` `print` `(` `"The Standard Deviation of Sample2 is % s"` ` ` `%` `(stdev(sample2)))` ` ` `print` `(` `"The Standard Deviation of Sample3 is % s"` ` ` `%` `(stdev(sample3)))` ` ` ` ` `print` `(` `"The Standard Deviation of Sample4 is % s"` ` ` `%` `(stdev(sample4)))` |

**Output :**

The Standard Deviation of Sample1 is 3.9761191895520196 The Standard Deviation of Sample2 is 1.8708286933869707 The Standard Deviation of Sample3 is 7.8182478855559445 The Standard Deviation of Sample4 is 0.41967844833872525

**Code #3 :**Demonstrate the difference between results of variance() and stdev()

## Python3

`# Python code to demonstrate difference` `# in results of stdev() and variance()` `# importing Statistics module` `import` `statistics` `# creating a simple data-set` `sample ` `=` `[` `1` `, ` `2` `, ` `3` `, ` `4` `, ` `5` `]` `# Printing standard deviation` `# xbar is set to default value of 1` `print` `(` `"Standard Deviation of the sample is % s "` ` ` `%` `(statistics.stdev(sample)))` `# variance is approximately the` `# squared result of what stdev is` `print` `(` `"Variance of the sample is % s"` ` ` `%` `(statistics.variance(sample)))` |

**Output :**

Standard Deviation of the sample is 1.5811388300841898 Variance of the sample is 2.5

**Code #4 :** Demonstrate the use of **xbar** parameter

## Python3

`# Python code to demonstrate use of xbar` `# parameter while using stdev() function` `# Importing statistics module` `import` `statistics` `# creating a sample list` `sample ` `=` `(` `1` `, ` `1.3` `, ` `1.2` `, ` `1.9` `, ` `2.5` `, ` `2.2` `)` `# calculating the mean of sample set` `m ` `=` `statistics.mean(sample)` `# xbar is nothing but stores` `# the mean of the sample set` `# calculating the variance of sample set` `print` `(` `"Standard Deviation of Sample set is % s"` ` ` `%` `(statistics.stdev(sample, xbar ` `=` `m)))` |

**Output :**

Standard Deviation of Sample set is 0.6047037842337906

**Code #5 :** Demonstrates StatisticsError

## Python3

`# Python code to demonstrate StatisticsError` `# importing the statistics module` `import` `statistics` `# creating a data-set with one element` `sample ` `=` `[` `1` `]` `# will raise StatisticsError` `print` `(statistics.stdev(sample))` |

**Output :**

Traceback (most recent call last): File "/home/f921f9269b061f1cc4e5fc74abf6ce10.py", line 12, in print(statistics.stdev(sample)) File "/usr/lib/python3.5/statistics.py", line 617, in stdev var = variance(data, xbar) File "/usr/lib/python3.5/statistics.py", line 555, in variance raise StatisticsError('variance requires at least two data points') statistics.StatisticsError: variance requires at least two data points

**Applications :**

- Standard Deviation is highly essential in the field of statistical maths and statistical study. It is commonly used to measure confidence in statistical calculations. For example, the margin of error in calculating marks of an exam is determined by calculating the expected standard deviation in the results if the same exam were to be conducted multiple times.
- It is very useful in the field of financial studies as well as it helps to determine the margin of profit and loss. The standard deviation is also important, where the standard deviation on the rate of return on an investment is a measure of the volatility of the investment.