Skip to content
Related Articles

Related Articles

Improve Article

Know Your Sorting Algorithm | Set 2 (Introsort- C++’s Sorting Weapon)

  • Difficulty Level : Medium
  • Last Updated : 28 Jun, 2021
Geek Week

We have discussed sorting weapons used by different languages in previous article. In this article, C++’s Sorting Weapon, Introsort is discussed.

What is Introsort?
Simply putting, it is the best sorting algorithm around. It is a hybrid sorting algorithm, which means that it uses more than one sorting algorithms as a routine.

Which standard sorting algorithms are used in Introsort
Introsort being a hybrid sorting algorithm uses three sorting algorithm to minimise the running time, Quicksort, Heapsort and Insertion Sort

How does it work?
Introsort begins with quicksort and if the recursion depth goes more than a particular limit it switches to Heapsort to avoid Quicksort’s worse case O(N2) time complexity. It also uses insertion sort when the number of elements to sort is quite less.
So first it creates a partition. Three cases arises from here.

  1. If the partition size is such that there is a possibility to exceed the maximum depth limit then the Introsort switches to Heapsort. We define the maximum depth limit as 2*log(N)
  2. If the partition size is too small then Quicksort decays to Insertion Sort. We define this cutoff as 16 (due to research). So if the partition size is less than 16 then we will do insertion sort.
  3. If the partition size is under the limit and not too small (i.e- between 16 and 2*log(N)), then it performs a simple quicksort.

Why is it better than simple Quicksort or Why the need of Introsort?
Since Quicksort can have a worse case O(N2) time complexity and it also increases the recursion stack space (O(log N) if tail recursion applied), so to avoid all these, we need to switch the algorithm from Quicksort to another if there is a chance of worse case. So Introsort solves this problem by switching to Heapsort.

Also due to larger constant factor, quicksort can perform even worse than O(N2) sorting algorithm when N is small enough. So it switches to insertion sort to decrease the running time of sorting.

Also if a bad pivot-selection is done then the quicksort does no better than the bubble-sort.

Why is Insertion Sort used (and not Bubble Sort, etc)?
Insertion sort offers following advantages.

  1. It is a known and established fact that insertion sort is the most optimal comparison-based sorting algorithm for small arrays.
  2. It has a good locality of reference
  3. It is an adaptive sorting algorithm, i.e- it outperforms all the other algorithms if the array elements are partially sorted.

Why is Heapsort used (and not Mergesort etc)?
This is solely because of memory requirements. Merge sort requires O(N) space whereas Heapsort is an in-place O(1) space algorithm.

Why is Heapsort not used in place of Quicksort when the partition size is under the limit ?
This question is same as why Quicksort generally outperforms Heapsort ?

The answer is, although Heapsort also being O(N log N) in average as well as worse case and O(1) space also, we still don’t use it when the partition size is under the limit because the extra hidden constant factor in Heapsort is quite larger than that of Quicksort.

Why is cut-off 16 for switching from quick sort to insertion sort, and 2*logN for switching from quick sort to heap sort ?

These values are chosen empirically as an approximate because of various tests and researches conducted.

/* A Program to sort the array using Introsort.
  The most popular C++ STL Algorithm- sort()
  uses Introsort. */
using namespace std;
// A utility function to swap the values pointed by
// the two pointers
void swapValue(int *a, int *b)
    int *temp = a;
    a = b;
    b = temp;
/* Function to sort an array using insertion sort*/
void InsertionSort(int arr[], int *begin, int *end)
    // Get the left and the right index of the subarray
    // to be sorted
    int left = begin - arr;
    int right = end - arr;
    for (int i = left+1; i <= right; i++)
        int key = arr[i];
        int j = i-1;
       /* Move elements of arr[0..i-1], that are
          greater than key, to one position ahead
          of their current position */
        while (j >= left && arr[j] > key)
            arr[j+1] = arr[j];
            j = j-1;
        arr[j+1] = key;
// A function to partition the array and return
// the partition point
int* Partition(int arr[], int low, int high)
    int pivot = arr[high];    // pivot
    int i = (low - 1);  // Index of smaller element
    for (int j = low; j <= high- 1; j++)
        // If current element is smaller than or
        // equal to pivot
        if (arr[j] <= pivot)
            // increment index of smaller element
            swap(arr[i], arr[j]);
    swap(arr[i + 1], arr[high]);
    return (arr + i + 1);
// A function that find the middle of the
// values pointed by the pointers a, b, c
// and return that pointer
int *MedianOfThree(int * a, int * b, int * c)
    if (*a < *b && *b < *c)
        return (b);
    if (*a < *c && *c <= *b)
        return (c);
    if (*b <= *a && *a < *c)
        return (a);
    if (*b < *c && *c <= *a)
        return (c);
    if (*c <= *a && *a < *b)
        return (a);
    if (*c <= *b && *b <= *a)
        return (b);
// A Utility function to perform intro sort
void IntrosortUtil(int arr[], int * begin,
                  int * end, int depthLimit)
    // Count the number of elements
    int size = end - begin;
      // If partition size is low then do insertion sort
    if (size < 16)
        InsertionSort(arr, begin, end);
    // If the depth is zero use heapsort
    if (depthLimit == 0)
        make_heap(begin, end+1);
        sort_heap(begin, end+1);
    // Else use a median-of-three concept to
    // find a good pivot
    int * pivot = MedianOfThree(begin, begin+size/2, end);
    // Swap the values pointed by the two pointers
    swapValue(pivot, end);
   // Perform Quick Sort
    int * partitionPoint = Partition(arr, begin-arr, end-arr);
    IntrosortUtil(arr, begin, partitionPoint-1, depthLimit - 1);
    IntrosortUtil(arr, partitionPoint + 1, end, depthLimit - 1);
/* Implementation of introsort*/
void Introsort(int arr[], int *begin, int *end)
    int depthLimit = 2 * log(end-begin);
    // Perform a recursive Introsort
    IntrosortUtil(arr, begin, end, depthLimit);
// A utility function ot print an array of size n
void printArray(int arr[], int n)
   for (int i=0; i < n; i++)
       printf("%d ", arr[i]);
// Driver program to test Introsort
int main()
    int arr[] = {3, 1, 23, -9, 233, 23, -313, 32, -9};
    int n = sizeof(arr) / sizeof(arr[0]);
    // Pass the array, the pointer to the first element and
    // the pointer to the last element
    Introsort(arr, arr, arr+n-1);
    printArray(arr, n);

-313 -9 -9 1 3 23 23 32 233

Is Introsort stable ?

Since Quicksort is also not stable so Introsort is also not stable.

Time Complexity
Best Case – O(N log N)
Average Case- O(N log N)
Worse Case- O(N log N)
where, N = number of elements to be sorted.

Auxiliary Space
Just like quicksort, it may use O(log N) auxiliary recursion stack space.

Know Your Sorting Algorithm | Set 2 (Introsort- C++’s Sorting Weapon)


This article is contributed by Rachit Belwariar. If you like GeeksforGeeks and would like to contribute, you can also write an article and mail your article to See your article appearing on the GeeksforGeeks main page and help other Geeks.

Please write comments if you find anything incorrect, or you want to share more information about the topic discussed above

Attention reader! Don’t stop learning now. Get hold of all the important DSA concepts with the DSA Self Paced Course at a student-friendly price and become industry ready.  To complete your preparation from learning a language to DS Algo and many more,  please refer Complete Interview Preparation Course.

In case you wish to attend live classes with experts, please refer DSA Live Classes for Working Professionals and Competitive Programming Live for Students.

My Personal Notes arrow_drop_up
Recommended Articles
Page :