This article is a brief introduction to **TensorFlow** library using Python programming language.

**Introduction**

**TensorFlow** is an open-source software library. **TensorFlow** was originally developed by researchers and engineers working on the Google Brain Team within Google’s Machine Intelligence research organization for the purposes of conducting machine learning and deep neural networks research, but the system is general enough to be applicable in a wide variety of other domains as well!

Let us first try to understand what the word **TensorFlow** actually mean!

**TensorFlow** is basically a software library for numerical computation using **data flow graphs** where:

**nodes**in the graph represent mathematical operations.**edges**in the graph represent the multidimensional data arrays (called**tensors**) communicated between them. (Please note that**tensor**is the central unit of data in TensorFlow).

Consider the diagram given below:

Here, **add** is a node which represents addition operation. **a** and **b** are input tensors and **c** is the resultant tensor.

This flexible architecture allows you to deploy computation to one or more CPUs or GPUs in a desktop, server, or mobile device with a single API!

**TensorFlow APIs**

**TensorFlow** provides multiple APIs (Application Programming Interfaces). These can be classified into 2 major categories:

- Low level API:
- complete programming control
- recommended for machine learning researchers
- provides fine levels of control over the models
**TensorFlow Core**is the low level API of TensorFlow.

- High level API:
- built on top of
**TensorFlow Core** - easier to learn and use than
**TensorFlow Core** - make repetitive tasks easier and more consistent between different users
**tf.contrib.learn**is an example of a high level API.

- built on top of

In this article, we first discuss the basics of **TensorFlow Core** and then explore the higher level API, **tf.contrib.learn**.

**TensorFlow Core**

**1. Installing TensorFlow**

An easy to follow guide for **TensorFlow** installation is available here:

Installing TensorFlow.

Once installed, you can ensure a successful installation by running this command in python interpreter:

import tensorflow as tf

**2. The Computational Graph**

Any **TensorFlow Core** program can be divided into two discrete sections:

- Building the computational graph.A
**computational graph**is nothing but a series of TensorFlow operations arranged into a graph of nodes.

- Running the computational graph.To actually evaluate the nodes, we must run the computational graph within a
**session**. A session encapsulates the control and state of the TensorFlow runtime.

Now, let us write our very first **TensorFlow** program to understand above concept:

`# importing tensorflow ` `import` `tensorflow as tf ` ` ` `# creating nodes in computation graph ` `node1 ` `=` `tf.constant(` `3` `, dtype` `=` `tf.int32) ` `node2 ` `=` `tf.constant(` `5` `, dtype` `=` `tf.int32) ` `node3 ` `=` `tf.add(node1, node2) ` ` ` `# create tensorflow session object ` `sess ` `=` `tf.Session() ` ` ` `# evaluating node3 and printing the result ` `print` `(` `"Sum of node1 and node2 is:"` `,sess.run(node3)) ` ` ` `# closing the session ` `sess.close() ` |

*chevron_right*

*filter_none*

Output:

Sum of node1 and node2 is: 8

Let us try to understand above code:

**Step 1 : Create a computational graph**By creating computational graph, we mean defining the nodes. Tensorflow provides different types of nodes for a variety of tasks. Each node takes zero or more tensors as inputs and produces a tensor as an output.

- In above program, the nodes
**node1**and**node2**are of**tf.constant**type. A**constant**node takes no inputs, and it outputs a value it stores internally. Note that we can also specify the data type of output tensor using**dtype**argument.node1 = tf.constant(3, dtype=tf.int32) node2 = tf.constant(5, dtype=tf.int32)

**node3**is of**tf.add**type. It takes two tensors as input and returns their sum as output tensor.node3 = tf.add(node1, node2)

- In above program, the nodes
**Step 2 : Run the computational graph**In order to run the computational graph, we need to create a

**session**. To create a session, we simply do:

sess = tf.Session()

Now, we can invoke the

**run**method of session object to perform computations on any node:print("Sum of node1 and node2 is:",sess.run(node3))

Here,

**node3**gets evaluated which further invokes**node1**and**node2**. Finally, we close the session using:sess.close()

**Note:** Another(and better) method of working with sessions is to use **with block** like this:

with tf.Session() as sess: print("Sum of node1 and node2 is:",sess.run(node3))

The benefit of this approach is that you do not need to close the session explicitly as it gets automatically closed once control goes out of the scope of **with** block.

**3. Variables**

TensorFlow has **Variable** nodes too which can hold variable data. They are mainly used to hold and update parameters of a training model.

Variables are **in-memory buffers** containing tensors. They must be explicitly initialized and can be saved to disk during and after training. You can later restore saved values to exercise or analyze the model.

An important difference to note between a **constant** and **Variable** is:

A constant’s value is stored in the graph and its value is replicated wherever the graph is loaded. A variable is stored separately, and may live on a parameter server.

Given below is an example using **Variable**:

`# importing tensorflow ` `import` `tensorflow as tf ` ` ` `# creating nodes in computation graph ` `node ` `=` `tf.Variable(tf.zeros([` `2` `,` `2` `])) ` ` ` `# running computation graph ` `with tf.Session() as sess: ` ` ` ` ` `# initialize all global variables ` ` ` `sess.run(tf.global_variables_initializer()) ` ` ` ` ` `# evaluating node ` ` ` `print` `(` `"Tensor value before addition:\n"` `,sess.run(node)) ` ` ` ` ` `# elementwise addition to tensor ` ` ` `node ` `=` `node.assign(node ` `+` `tf.ones([` `2` `,` `2` `])) ` ` ` ` ` `# evaluate node again ` ` ` `print` `(` `"Tensor value after addition:\n"` `, sess.run(node)) ` |

*chevron_right*

*filter_none*

Output:

Tensor value before addition: [[ 0. 0.] [ 0. 0.]] Tensor value after addition: [[ 1. 1.] [ 1. 1.]]

In above program:

- We define a node of type
**Variable**and assign it some initial value.node = tf.Variable(tf.zeros([2,2]))

- To initialize the variable node in current session’s scope, we do:
sess.run(tf.global_variables_initializer())

- To assign a new value to a variable node, we can use
**assign**method like this:node = node.assign(node + tf.ones([2,2]))

**4. Placeholders**

A graph can be parameterized to accept external inputs, known as **placeholders**. A placeholder is a promise to provide a value later.

While evaluating the graph involving **placeholder** nodes, a **feed_dict** parameter is passed to the session’s **run** method to specify Tensors that provide concrete values to these placeholders.

Consider the example given below:

`# importing tensorflow ` `import` `tensorflow as tf ` ` ` `# creating nodes in computation graph ` `a ` `=` `tf.placeholder(tf.int32, shape` `=` `(` `3` `,` `1` `)) ` `b ` `=` `tf.placeholder(tf.int32, shape` `=` `(` `1` `,` `3` `)) ` `c ` `=` `tf.matmul(a,b) ` ` ` `# running computation graph ` `with tf.Session() as sess: ` ` ` `print` `(sess.run(c, feed_dict` `=` `{a:[[` `3` `],[` `2` `],[` `1` `]], b:[[` `1` `,` `2` `,` `3` `]]})) ` |

*chevron_right*

*filter_none*

Output:

[[3 6 9] [2 4 6] [1 2 3]]

Let us try to understand above program:

- We define placeholder nodes
**a**and**b**like this:a = tf.placeholder(tf.int32, shape=(3,1)) b = tf.placeholder(tf.int32, shape=(1,3))

The first argument is the data type of the tensor and one of the optional argument is shape of the tensor.

- We define another node
**c**which does the operation of matrix multiplication (**matmul**). We pass the two placeholder nodes as argument.c = tf.matmul(a,b)

- Finally, when we run the session, we pass the value of placeholder nodes in
**feed_dict**argument of**sess.run**:print(sess.run(c, feed_dict={a:[[3],[2],[1]], b:[[1,2,3]]}))

Consider the diagrams shown below to clear the concept:

- Initially:

- After sess.run:

#### 5. An example : Linear Regression model

Given below is an implementation of a **Linear Regression model** using TensorFlow Core API.

`# importing the dependencies ` `import` `tensorflow as tf ` `import` `numpy as np ` `import` `matplotlib.pyplot as plt ` ` ` `# Model Parameters ` `learning_rate ` `=` `0.01` `training_epochs ` `=` `2000` `display_step ` `=` `200` ` ` `# Training Data ` `train_X ` `=` `np.asarray([` `3.3` `,` `4.4` `,` `5.5` `,` `6.71` `,` `6.93` `,` `4.168` `,` `9.779` `,` `6.182` `,` `7.59` `,` `2.167` `, ` ` ` `7.042` `,` `10.791` `,` `5.313` `,` `7.997` `,` `5.654` `,` `9.27` `,` `3.1` `]) ` `train_y ` `=` `np.asarray([` `1.7` `,` `2.76` `,` `2.09` `,` `3.19` `,` `1.694` `,` `1.573` `,` `3.366` `,` `2.596` `,` `2.53` `,` `1.221` `, ` ` ` `2.827` `,` `3.465` `,` `1.65` `,` `2.904` `,` `2.42` `,` `2.94` `,` `1.3` `]) ` `n_samples ` `=` `train_X.shape[` `0` `] ` ` ` `# Test Data ` `test_X ` `=` `np.asarray([` `6.83` `, ` `4.668` `, ` `8.9` `, ` `7.91` `, ` `5.7` `, ` `8.7` `, ` `3.1` `, ` `2.1` `]) ` `test_y ` `=` `np.asarray([` `1.84` `, ` `2.273` `, ` `3.2` `, ` `2.831` `, ` `2.92` `, ` `3.24` `, ` `1.35` `, ` `1.03` `]) ` ` ` `# Set placeholders for feature and target vectors ` `X ` `=` `tf.placeholder(tf.float32) ` `y ` `=` `tf.placeholder(tf.float32) ` ` ` `# Set model weights and bias ` `W ` `=` `tf.Variable(np.random.randn(), name` `=` `"weight"` `) ` `b ` `=` `tf.Variable(np.random.randn(), name` `=` `"bias"` `) ` ` ` `# Construct a linear model ` `linear_model ` `=` `W` `*` `X ` `+` `b ` ` ` `# Mean squared error ` `cost ` `=` `tf.reduce_sum(tf.square(linear_model ` `-` `y)) ` `/` `(` `2` `*` `n_samples) ` ` ` `# Gradient descent ` `optimizer ` `=` `tf.train.GradientDescentOptimizer(learning_rate).minimize(cost) ` ` ` `# Initializing the variables ` `init ` `=` `tf.global_variables_initializer() ` ` ` `# Launch the graph ` `with tf.Session() as sess: ` ` ` `# Load initialized variables in current session ` ` ` `sess.run(init) ` ` ` ` ` `# Fit all training data ` ` ` `for` `epoch ` `in` `range` `(training_epochs): ` ` ` ` ` `# perform gradient descent step ` ` ` `sess.run(optimizer, feed_dict` `=` `{X: train_X, y: train_y}) ` ` ` ` ` `# Display logs per epoch step ` ` ` `if` `(epoch` `+` `1` `) ` `%` `display_step ` `=` `=` `0` `: ` ` ` `c ` `=` `sess.run(cost, feed_dict` `=` `{X: train_X, y: train_y}) ` ` ` `print` `(` `"Epoch:{0:6} \t Cost:{1:10.4} \t W:{2:6.4} \t b:{3:6.4}"` `. ` ` ` `format` `(epoch` `+` `1` `, c, sess.run(W), sess.run(b))) ` ` ` ` ` `# Print final parameter values ` ` ` `print` `(` `"Optimization Finished!"` `) ` ` ` `training_cost ` `=` `sess.run(cost, feed_dict` `=` `{X: train_X, y: train_y}) ` ` ` `print` `(` `"Final training cost:"` `, training_cost, ` `"W:"` `, sess.run(W), ` `"b:"` `, ` ` ` `sess.run(b), ` `'\n'` `) ` ` ` ` ` `# Graphic display ` ` ` `plt.plot(train_X, train_y, ` `'ro'` `, label` `=` `'Original data'` `) ` ` ` `plt.plot(train_X, sess.run(W) ` `*` `train_X ` `+` `sess.run(b), label` `=` `'Fitted line'` `) ` ` ` `plt.legend() ` ` ` `plt.show() ` ` ` ` ` `# Testing the model ` ` ` `testing_cost ` `=` `sess.run(tf.reduce_sum(tf.square(linear_model ` `-` `y)) ` `/` `(` `2` `*` `test_X.shape[` `0` `]), ` ` ` `feed_dict` `=` `{X: test_X, y: test_y}) ` ` ` ` ` `print` `(` `"Final testing cost:"` `, testing_cost) ` ` ` `print` `(` `"Absolute mean square loss difference:"` `, ` `abs` `(training_cost ` `-` `testing_cost)) ` ` ` ` ` `# Display fitted line on test data ` ` ` `plt.plot(test_X, test_y, ` `'bo'` `, label` `=` `'Testing data'` `) ` ` ` `plt.plot(train_X, sess.run(W) ` `*` `train_X ` `+` `sess.run(b), label` `=` `'Fitted line'` `) ` ` ` `plt.legend() ` ` ` `plt.show() ` |

*chevron_right*

*filter_none*

Epoch: 200 Cost: 0.1715 W: 0.426 b:-0.4371 Epoch: 400 Cost: 0.1351 W:0.3884 b:-0.1706 Epoch: 600 Cost: 0.1127 W:0.3589 b:0.03849 Epoch: 800 Cost: 0.09894 W:0.3358 b:0.2025 Epoch: 1000 Cost: 0.09047 W:0.3176 b:0.3311 Epoch: 1200 Cost: 0.08526 W:0.3034 b:0.4319 Epoch: 1400 Cost: 0.08205 W:0.2922 b:0.5111 Epoch: 1600 Cost: 0.08008 W:0.2835 b:0.5731 Epoch: 1800 Cost: 0.07887 W:0.2766 b:0.6218 Epoch: 2000 Cost: 0.07812 W:0.2712 b: 0.66 Optimization Finished! Final training cost: 0.0781221 W: 0.271219 b: 0.65996 Final testing cost: 0.0756337 Absolute mean square loss difference: 0.00248838

Let us try to understand the above code.

- First of all, we define some parameters for training our model, like:
learning_rate = 0.01 training_epochs = 2000 display_step = 200

- Then we define placeholder nodes for feature and target vector.
X = tf.placeholder(tf.float32) y = tf.placeholder(tf.float32)

- Then, we define variable nodes for weight and bias.
W = tf.Variable(np.random.randn(), name="weight") b = tf.Variable(np.random.randn(), name="bias")

**linear_model**is an operational node which calculates the hypothesis for the linear regression model.linear_model = W*X + b

- Loss (or cost) per gradient descent is calculated as the mean squared error and its node is defined as:
cost = tf.reduce_sum(tf.square(linear_model - y)) / (2*n_samples)

- Finally, we have the
**optimizer**node which implements the Gradient Descent Algorithm.optimizer = tf.train.GradientDescentOptimizer(learning_rate).minimize(cost)

- Now, the training data is fit into the linear model by applying the Gradient Descent Algorithm. The task is repeated
**training_epochs**number of times. In each epoch, we perform the gradient descent step like this:sess.run(optimizer, feed_dict={X: train_X, y: train_y})

- After every
**display_step**number of epochs, we print the value of current loss which is found using:c = sess.run(cost, feed_dict={X: train_X, y: train_y})

- The model is evaluated on test data and
**testing_cost**is calculated using:testing_cost = sess.run(tf.reduce_sum(tf.square(linear_model - y)) / (2 * test_X.shape[0]), feed_dict={X: test_X, y: test_y})

**tf.contrib.learn**

**tf.contrib.learn** is a high-level TensorFlow library that simplifies the mechanics of machine learning, including the following:

- running training loops
- running evaluation loops
- managing data sets
- managing feeding

Let us try to see the implementation of Linear regression on same data we used above using **tf.contrib.learn**.

`# importing the dependencies ` `import` `tensorflow as tf ` `import` `numpy as np ` ` ` `# declaring list of features ` `features ` `=` `[tf.contrib.layers.real_valued_column(` `"X"` `)] ` ` ` `# creating a linear regression estimator ` `estimator ` `=` `tf.contrib.learn.LinearRegressor(feature_columns` `=` `features) ` ` ` `# training and test data ` `train_X ` `=` `np.asarray([` `3.3` `,` `4.4` `,` `5.5` `,` `6.71` `,` `6.93` `,` `4.168` `,` `9.779` `,` `6.182` `,` `7.59` `,` `2.167` `, ` ` ` `7.042` `,` `10.791` `,` `5.313` `,` `7.997` `,` `5.654` `,` `9.27` `,` `3.1` `]) ` `train_y ` `=` `np.asarray([` `1.7` `,` `2.76` `,` `2.09` `,` `3.19` `,` `1.694` `,` `1.573` `,` `3.366` `,` `2.596` `,` `2.53` `,` `1.221` `, ` ` ` `2.827` `,` `3.465` `,` `1.65` `,` `2.904` `,` `2.42` `,` `2.94` `,` `1.3` `]) ` `test_X ` `=` `np.asarray([` `6.83` `, ` `4.668` `, ` `8.9` `, ` `7.91` `, ` `5.7` `, ` `8.7` `, ` `3.1` `, ` `2.1` `]) ` `test_y ` `=` `np.asarray([` `1.84` `, ` `2.273` `, ` `3.2` `, ` `2.831` `, ` `2.92` `, ` `3.24` `, ` `1.35` `, ` `1.03` `]) ` ` ` `# function to feed dict of numpy arrays into the model for training ` `input_fn ` `=` `tf.contrib.learn.io.numpy_input_fn({` `"X"` `:train_X}, train_y, ` ` ` `batch_size` `=` `4` `, num_epochs` `=` `2000` `) ` ` ` `# function to feed dict of numpy arrays into the model for testing ` `test_input_fn ` `=` `tf.contrib.learn.io.numpy_input_fn({` `"X"` `:test_X}, test_y) ` ` ` `# fit training data into estimator ` `estimator.fit(input_fn` `=` `input_fn) ` ` ` `# print value of weight and bias ` `W ` `=` `estimator.get_variable_value(` `'linear/X/weight'` `)[` `0` `][` `0` `] ` `b ` `=` `estimator.get_variable_value(` `'linear/bias_weight'` `)[` `0` `] ` `print` `(` `"W:"` `, W, ` `"\tb:"` `, b) ` ` ` `# evaluating the final loss ` `train_loss ` `=` `estimator.evaluate(input_fn` `=` `input_fn)[` `'loss'` `] ` `test_loss ` `=` `estimator.evaluate(input_fn` `=` `test_input_fn)[` `'loss'` `] ` `print` `(` `"Final training loss:"` `, train_loss) ` `print` `(` `"Final testing loss:"` `, test_loss) ` |

*chevron_right*

*filter_none*

W: 0.252928 b: 0.802972 Final training loss: 0.153998 Final testing loss: 0.0777036

Let us try to understand the above code.

- The shape and type of feature matrix is declared using a list. Each element of the list defines the structure of a column. In above example, we have only 1 feature which stores real values and has been given a name
**X**.features = [tf.contrib.layers.real_valued_column("X")]

- Then, we need an estimator. An estimator is nothing but a pre-defined model with many useful methods and parameters. In above example, we use a Linear Regression model estimator.
estimator = tf.contrib.learn.LinearRegressor(feature_columns=features)

- For training purpose, we need to use an input function which is responsible for feeding data to estimator while training. It takes the feature column values as dictionary. Many other parameters like batch size, number of epochs, etc can be specified.
input_fn = tf.contrib.learn.io.numpy_input_fn({"X":train_X}, train_y, batch_size=4, num_epochs=2000)

- To fit training data to estimator, we simply use
**fit**method of estimator in which input function is passed as an argument.estimator.fit(input_fn=input_fn)

- Once training is complete, we can get the value of different variables using
**get_variable_value**method of estimator. You can get a list of all variables using**get_variable_names**method.W = estimator.get_variable_value('linear/X/weight')[0][0] b = estimator.get_variable_value('linear/bias_weight')[0]

- The mean squared error/loss can be computed as:
train_loss = estimator.evaluate(input_fn=input_fn)['loss'] test_loss = estimator.evaluate(input_fn=test_input_fn)['loss']

This brings us to the end of this **Introduction to TensorFlow** article!

From here, you can try to explore this tutorial: MNIST For ML Beginners.

This article is contributed by **Nikhil Kumar**. If you like GeeksforGeeks and would like to contribute, you can also write an article using contribute.geeksforgeeks.org or mail your article to contribute@geeksforgeeks.org. See your article appearing on the GeeksforGeeks main page and help other Geeks.

Please write comments if you find anything incorrect, or you want to share more information about the topic discussed above.

Attention geek! Strengthen your foundations with the **Python Programming Foundation** Course and learn the basics.

To begin with, your interview preparations Enhance your Data Structures concepts with the **Python DS** Course.

## Recommended Posts:

- Introduction to Tensor with Tensorflow
- Python | Classify Handwritten Digits with Tensorflow
- Softmax Regression using TensorFlow
- Python | Tensorflow cos() method
- Linear Regression Using Tensorflow
- Python | Tensorflow nn.sigmoid()
- Python | Tensorflow nn.relu() and nn.leaky_relu()
- Python | Tensorflow nn.softplus()
- Python | Tensorflow nn.tanh()
- Python | Creating tensors using different functions in Tensorflow
- ML | Logistic Regression using Tensorflow
- Python | Tensorflow sin() method
- Python | Tensorflow atan() method
- Python | Tensorflow tan() method
- Python | Tensorflow cosh() method
- Python | Tensorflow sinh() method
- Python | Tensorflow asin() method
- Python | Tensorflow acos() method
- Python | Tensorflow reciprocal() method
- Python | Tensorflow exp() method