A system is a set of related components that work as a whole to achieve a goal. A system contains inputs, behavior and outputs.
Behavior is a function that translates inputs to output.
Components are electronics blocks – digital, analog, or mixed signal. Digital System is a system in which signals have a finite number of discrete values. Analog System has values from a continuous set and Mixed Signal System has both Digital and Analog parts.
Generally, signals are represented by two methods, i.e., Digital and Analog System. Digital Signal is limited to only a few possible values, generally represented by Binary logic 0 (0 – 0.8 volts) and logic 1 (2.0 – 5.0 volts). Whereas Analog Signal varies continuously.
Attention reader! Don’t stop learning now. Get hold of all the important DSA concepts with the DSA Self Paced Course at a student-friendly price and become industry ready.
- LMN - Digital Electronics
- Digital Signature Standard (DSS)
- Implementation of Digital System
- Encoder in Digital Logic
- Digital to Analog Conversion
- Specification of Digital System
- Difference between SOP and POS in Digital Logic
- What is Scrambling in Digital Electronics ?
- BCD Adder in Digital Logic
- Digital Design Process
- What is DVM(Digital Volt Meter)?
- Latches in Digital Logic
- What is DSU(Digital Service Unit)?
- Analog to Digital Conversion
- What is DAT(Digital Audio Tape)?
- 5 variable K-Map in Digital Logic
- Counters in Digital Logic
- Multiplexers in Digital Logic
- Non-binary Counter in Digital Logic
- Switch Debounce in Digital Circuits
If you like GeeksforGeeks and would like to contribute, you can also write an article using contribute.geeksforgeeks.org or mail your article to email@example.com. See your article appearing on the GeeksforGeeks main page and help other Geeks.
Please Improve this article if you find anything incorrect by clicking on the "Improve Article" button below.