Open In App

How to make a Python auto clicker?

Improve
Improve
Like Article
Like
Save
Share
Report

In this article, we will see how to create an auto-clicker using Python. The code will take input from the keyboard when the user clicks on the start key and terminates auto clicker when the user clicks on exit key, the auto clicker starts clicking wherever the pointer is placed on the screen. We are going to use the pynput module here. 

What is Auto Clicker?

Auto-Clicker is a script where you can auto control mouse and keyboard as many numbers of times as you want. It is controlled using user-defined keys. It works on various platforms like Windows, Mac and Linux. Auto clicker is present in pywin32 module.

Approach:

In this project, we will use a cross-platform module pynput to control the mouse and monitor the keyboard at the same time to create simple auto-clicker. To check for mouse events we will install pynput module (used to control the mouse) for this execute, pip install pynput in cmd. 

Note: If you’re stuck on how to set up python-pip package on your system then click here

Installation of pynput module

Verify whether the pynput module has been successfully installed into your working environment for this, open IDLE on the system that is cmd or Python Shell. Execute the command import pynput, after executing this the output should give zero errors which means your module is successfully installed. 

Verifying module installation

Implementation:

Let’s now proceed with the code that is required to build an Auto-clicker using Python. Follow the below steps to create an auto-clicker:

Step 1: Import time and threading then import Button and Controller from pynput.mouse module. Import Listener and KeyCode from pynput.keyboard.

Python3




# importing time and threading
import time
import threading
from pynput.mouse import Button, Controller
  
# pynput.keyboard is used to watch events of
# keyboard for start and stop of auto-clicker
from pynput.keyboard import Listener, KeyCode


Step 2: Create four variables  as mentioned below,

  • delay: Delay between each click (in seconds)
  • button: Button is used to click in whatever direction you want to.  Button.left | Button.middle | Button.right
  • start_stop_key: The key used for start and stop of the click while you run the program for executing the auto clicker. It should be from a key class or set using KeyCode.
  • exit_key: The key used to terminate the auto clicker that is being executed. This should be from the key class or set using KeyCode.

Python3




# four variables are created to
# control the auto-clicker
delay = 0.001
button = Button.right
start_stop_key = KeyCode(char='a')
stop_key = KeyCode(char='b')


Step 3: Create a class extending threading.Thread. Pass delay and button to the class that have two flags to check if the program is executed or not.

Python3




# threading.Thread is used 
# to control clicks
class ClickMouse(threading.Thread):
    
  # delay and button is passed in class 
  # to check execution of auto-clicker
    def __init__(self, delay, button):
        super(ClickMouse, self).__init__()
        self.delay = delay
        self.button = button
        self.running = False
        self.program_running = True


Step 4: Add methods to control the threads externally.

Python3




def start_clicking(self):
        self.running = True
  
def stop_clicking(self):
        self.running = False
  
def exit(self):
        self.stop_clicking()
        self.program_running = False


 

Step 5: A method is created when the thread starts, the program_running runs on loop until the value comes out to be true and also create another loop inside the existing loop where it checks if running is set to true or not. In case, we are inside both loops, it will click on the set button and sleep for the set delay.

Python3




# method to check and run loop until 
# it is true another loop will check 
# if it is set to true or not, 
# for mouse click it set to button 
# and delay.
def run(self):
    while self.program_running:
        while self.running:
            mouse.click(self.button)
            time.sleep(self.delay)
        time.sleep(0.1)


Step 6: Creating an instance for the mouse controller, then create ClickMouse thread. Start the instance to move into the loop inside the run method.

Python3




# instance of mouse controller is created
mouse = Controller()
click_thread = ClickMouse(delay, button)
click_thread.start()


 

Step 7: Create a method on_press which takes a key as an argument and sets up a keyboard listener. The start_stop_key matches with a start key (a) when it is executed. Then the click is to be terminated when running flag is set to True in the thread. Exit method is called in the method if the exit key (b) is executed and stop the listener.

Python3




# on_press method takes
# key as argument
  
  
def on_press(key):
  
  # start_stop_key will stop clicking
  # if running flag is set to true
    if key == start_stop_key:
        if click_thread.running:
            click_thread.stop_clicking()
        else:
            click_thread.start_clicking()
  
    # here exit method is called and when
    # key is pressed it terminates auto clicker
    elif key == stop_key:
        click_thread.exit()
        listener.stop()
  
  
with Listener(on_press=on_press) as listener:
    listener.join()


After the code is run we can see in the output as shown below, it shows the number of clicks the auto-clicker has made after the code is implemented. It is compatible with Windows, Mac and Linux. Auto-Clicker is helpful software for the systems as it let’s save a reasonable amount of time that is spent on repeated amount of clicks. 

Below is the complete program:

Python3




# importing time and threading
import time
import threading
from pynput.mouse import Button, Controller
  
# pynput.keyboard is used to watch events of 
# keyboard for start and stop of auto-clicker
from pynput.keyboard import Listener, KeyCode
  
  
# four variables are created to 
# control the auto-clicker
delay = 0.001
button = Button.right
start_stop_key = KeyCode(char='a')
stop_key = KeyCode(char='b')
  
# threading.Thread is used 
# to control clicks
class ClickMouse(threading.Thread):
    
  # delay and button is passed in class 
  # to check execution of auto-clicker
    def __init__(self, delay, button):
        super(ClickMouse, self).__init__()
        self.delay = delay
        self.button = button
        self.running = False
        self.program_running = True
  
    def start_clicking(self):
        self.running = True
  
    def stop_clicking(self):
        self.running = False
  
    def exit(self):
        self.stop_clicking()
        self.program_running = False
  
    # method to check and run loop until 
    # it is true another loop will check 
    # if it is set to true or not, 
    # for mouse click it set to button 
    # and delay.
    def run(self):
        while self.program_running:
            while self.running:
                mouse.click(self.button)
                time.sleep(self.delay)
            time.sleep(0.1)
  
  
# instance of mouse controller is created
mouse = Controller()
click_thread = ClickMouse(delay, button)
click_thread.start()
  
  
# on_press method takes 
# key as argument
def on_press(key):
    
  # start_stop_key will stop clicking 
  # if running flag is set to true
    if key == start_stop_key:
        if click_thread.running:
            click_thread.stop_clicking()
        else:
            click_thread.start_clicking()
              
    # here exit method is called and when 
    # key is pressed it terminates auto clicker
    elif key == stop_key:
        click_thread.exit()
        listener.stop()
  
  
with Listener(on_press=on_press) as listener:
    listener.join()


Now let’s execute the python program we’ve written and then press the start (a) and stop (a) keys in order to initiate the auto clicker. 

Output:



Last Updated : 19 Jan, 2021
Like Article
Save Article
Previous
Next
Share your thoughts in the comments
Similar Reads