How to Format a Write–Protected Pen Drive?

When you receive the error “The disk is write-protected“, it means you tried formatting your Pendrive but were not able to. This may be due to external software or encryption that was probably used to lock the contents of the Pendrive and the contents within the drive are read-only. In this case, the computer does not allow you to format, edit, or modify contents of the Pendrive in any way.

Here are some ways to get around this problem and completely erase the contents of the Pendrive. Also, once you finish the necessary process, the Pendrive will be empty and open to modification and editing of all kinds. Before proceeding further, please check if your Pendrive has a switch at the side to enable its lock protection. If so, simply toggle the switch to “off” and the write protection is gone! However, if you’re using a normal USB Pendrive with no such switch, read on. There are 2 CMD based methods you can use, let’s see them one by one:

Method 1: Using Registry Edits

For this method, make sure you are logged in as an administrator on your system and follow the steps given below:

Step 1: Click “Start” or the windows icon on the bottom left corner, type: Regedit in the search box, click “Regedit.exe” to open the Registry editor when you see it is displayed at the top of the list.


 
Step 2: Then navigate to the following key:



Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies


 
Please note, if you can’t find the StorageDevicePolicies Folder, then right-click the “Control” folder and create a new policy by right-clicking it. Name it “StorageDevicePolicies” (without spaces) and create a new DWORD as “WriteProtect”. Make sure the value data field is marked as “0”.

Step 3: Now double-click to open it and change the value data to “0”. Now quit this screen and your Pendrive is ready to format like you normally do – using right-click–>format.

Method 2: Using diskpart

For this method, make sure you are logged in as an administrator on your system and follow the steps given below:

Step 1: Firstly, connect the USB drive to the system and launch the Command Prompt application from the Start menu. Once it is launched, enter the “Diskpart” command to launch the utility tool.

Step 2: Enter the “list disk” command to view the attached drives. From here, identify the disk identifier from the list.

Step 3: Now, you need to pick your USB drive using the “select” command followed by its identifier. The identifier is the name of the disk as recognized by your PC. If you’re not sure what this is, go to My Computer and check the name. Let’s assume the name of your disk is disk 1, here’s how your cmd window should look by now:


 
Proceed to the next step only if you can see the message drive-name is now the selected disk.

Step 4: Then, type the “attributes disk clear read-only” command, press enter. This will clear the read-only feature from the USB drive.

Step 5: Once you see the message “Disk attributes cleared successfully“, your drive permissions are reset and you can exit the Command Prompt and format the Pendrive like you normally do – using right-click–>format.

Please note it is also possible to use some third party Softwares like EaseUs to format a write-protected Pendrive; However, they are not recommended as they can sometimes cause corruption of the Pendrive and you’ll not only lose all your data but be unable to safely store information on your Pendrive anymore.

My Personal Notes arrow_drop_up

Check out this Author's contributed articles.

If you like GeeksforGeeks and would like to contribute, you can also write an article using contribute.geeksforgeeks.org or mail your article to contribute@geeksforgeeks.org. See your article appearing on the GeeksforGeeks main page and help other Geeks.

Please Improve this article if you find anything incorrect by clicking on the "Improve Article" button below.


Article Tags :

1


Please write to us at contribute@geeksforgeeks.org to report any issue with the above content.