Prerequisite – Error Detection in Computer Networks
Checksum is the error detection method used by upper layer protocols and is considered to be more reliable than LRC, VRC and CRC. This method makes the use of Checksum Generator on Sender side and Checksum Checker on Receiver side.
At the Sender side, the data is divided into equal subunits of n bit length by the checksum generator. This bit is generally of 16-bit length. These subunits are then added together using one’s compliment method. This sum is of n bits. The resultant bit is then complimented. This complimented sum which is called checksum is appended to the end of original data unit and is then transmitted to Receiver.
The Receiver after receiving data + checksum passes it to checksum checker. Checksum checker divides this data unit into various subunits of equal length and adds all these subunits. These subunits also contain checksum as one of the subunits. The resultant bit is then complemented. If the complemented result is zero, it means the data is error-free. If the result is non-zero it means the data contains an error and Receiver rejects it.
If the data unit to be transmitted is 10101001 00111001, the following procedure is used at Sender site and Receiver site.
Sender Site :
10101001 subunit 1 00111001 subunit 2 11100010 sum (using 1s complement) 00011101 checksum (complement of sum)
Data transmitted to Receiver is –
Receiver Site :
10101001 subunit 1 00111001 subunit 2 00011101 checksum 11111111 sum 00000000 sum's complement Result is zero, it means no error.
The checksum detects all the errors involving an odd number of bits as well as the error involving an even number of bits.
The main problem is that the error goes undetected if one or more bits of a subunit is damaged and the corresponding bit or bits of a subunit are damaged and the corresponding bit or bits of opposite value in second subunit are also damaged. This is because the sum of those columns remains unchanged.
If the data transmitted along with checksum is 10101001 00111001 00011101. But the data received at destination is 00101001 10111001 00011101.
Receiver Site :
00101001 1st bit of subunit 1 is damaged 10111001 1st bit of subunit 2 is damaged 00011101 checksum 11111111 sum 00000000 Ok 1's complement
Although data is corrupted, the error is undetected.
Attention reader! Don’t stop learning now. Get hold of all the important CS Theory concepts for SDE interviews with the CS Theory Course at a student-friendly price and become industry ready.