Synchronous Data Link Control (SDLC) is generally discipline for serial-by-bit information transmission over channel of data communication. Whether switched or non-switched, physical communication channel is always considered to be constant once it is been established or developed. Communication channel over this transition channel is basically assumed to be not permanent. On this communication channel, there are basically three different types of transmission state that can be present or exist.
SDLC might exist in one of these transmission states as given below :
Let us understand in detail :
- Transient State –
This state usually arises when station is preparing itself to transfer and not yet reached steady state. This state also follows the poll of secondary station and come before the actual transfer of control data or information. This state also exists before and after initial transmission and also after each line turnaround.
- Idle State –
The circuit is basically considered to be in Idle state by secondary station just after 15 or more consecutive logic 1s that must have been received. There is also no transmission of control information or data during this state. A link connection configuration that is being used is required to determine and identify the particular link station action in this state as given below :
Link Connection Primary Link Station Secondary Link Station Half-duplex point-to-point Carrier off Carrier off Duplex point-to-point AIl 1’s AIl 1’s Half-duplex multipoint Carrier off Carrier off Duplex multipoint AIl 1’s Carrier off
- Active State –
It is a non-idle, non-transient state. In this state, there is possibility of transmission of control information and data. This state basically presents whether primary or one of the secondary stations is transferring information or control signals. In the following figure, it is clear that there is no exchange of information or data, but the line is held in this state.
Attention reader! Don’t stop learning now. Get hold of all the important CS Theory concepts for SDE interviews with the CS Theory Course at a student-friendly price and become industry ready.
- Transmission Modes in Computer Networks (Simplex, Half-Duplex and Full-Duplex)
- Types of Transmission Media
- Difference between Serial and Parallel Transmission
- Difference between Simplex, Half duplex and Full Duplex Transmission Modes
- Difference between Synchronous and Asynchronous Transmission
- Difference between Terrestrial Microwave and Satellite Microwave Transmission System
- What is MTU(Maximum Transmission Unit)?
- Types of Transmission Technology
- Synchronous Data Link Control (SDLC) Loop Operation
- SDLC Types and Topologies
- Derivative Protocols used in SDLC
- Basic Frame Structure of SDLC
- Open Shortest Path First (OSPF) protocol States
- PPP Automaton States
- Packet flow in different Network
- Working Of Different layers in Computer Network
- How world-wide-web (www) is different from the Internet ?
- Different Ways to Prepare an IT Network for IoT
- Different versions of Bluetooth
- Different types of CAPTCHAs
If you like GeeksforGeeks and would like to contribute, you can also write an article using contribute.geeksforgeeks.org or mail your article to firstname.lastname@example.org. See your article appearing on the GeeksforGeeks main page and help other Geeks.
Please Improve this article if you find anything incorrect by clicking on the "Improve Article" button below.