DDR stands for Double Data Rate. It is a technique in computing with which a computer bus transfers data at double the rate sending data at rising and falling edges of a clock cycle. This method allows for sending 2 signals per clock cycle.
The simplest way to design an electronic circuit is to make it perform one transfer per clock cycle (SDR technique uses this). This requires the clock signal to change twice per cycle. When operating at high bandwidth, signal integrity limitations constrain the clock frequency. By using both edges of the clock, the data signals operate with the same limiting frequency but doubling the total transmitted data. It was an improved version of SDRAM which uses an SDR technique for data transmission.
This technique was an improvement over its predecessor SDR (single data rate) and has been succeeded by an improved version named QDR (quad data rate). A double data rate clock cycle looks as follows:-
Characteristics of DDR
- Transmits data twice per cycle (wave/clock), firstly at the the rising edge and tehn at falling edges of a clock cycle
- Each clock cycle has a unidirectional flow of data
- DDR SDRAM technology consumes less power than older SDRAM modules, which expended 3.3 volts compared to DDR SDRAM’s 2.6 volts.
- DDR operates at same frequency as the clock cycle.
Advantages of DDR
- Higher levels of transmission speeds are obtained
- Reduces the number of cycles required to preform a task
- Reduces the component cost required
- Allows for smaller form factor computing devices
Disadvantages of DDR
- Slower compared to QDR (quad data rate) technique
- Devices accommodating DDR technique produces more heat
Applications of DDR
This technique has widespread acceptance in applications requiring high data transfer speeds such as:
- The technique is used extensively in building Volatile components for a computer (RAM) and is commonly referred to as DDR SDRAM (double data rate synchronized dynamic random access memory). The technique found a lot of success in the field, due to which the same technique has been implemented in later iterations of the technology under the name DDR2 SDRAM, DDR3 SDRAM, DDR4 SDRAM.
- The technique is used to incorporate volatile storage capabilities in Graphics Processors (graphic cards) and is known as GDDR (graphics double data rate). Which is a technology tailored to work with video cards
- Used in analog-to-digital converters
- Used in the bus of certain microprocessors (AMD’s Athlon64 series), allowing transmission of data at faster rate to-from the CPU.
Attention reader! Don’t stop learning now. Get hold of all the important CS Theory concepts for SDE interviews with the CS Theory Course at a student-friendly price and become industry ready.
- DDR-RAM Full Form
- DDR-SDRAM Full Form
- Difference between DDR and SDRAM
- TCL Full Form
- LFU Full Form
- VPN Full Form
- DOS Full Form
- SAS Full Form
- OSI Model Full Form in Computer Networking
- HDMi Full Form
- LCD Full Form
- ZIP Full Form
- API Full Form
- RTC Full Form
- VLAN Full Form
- WPA Full Form
- DQL Full Form
- VGA Full Form
- ISP Full Form
- SGML Full Form
If you like GeeksforGeeks and would like to contribute, you can also write an article using contribute.geeksforgeeks.org or mail your article to email@example.com. See your article appearing on the GeeksforGeeks main page and help other Geeks.
Please Improve this article if you find anything incorrect by clicking on the "Improve Article" button below.