Booth algorithm gives a procedure for multiplying binary integers in signed 2’s complement representation in efficient way, i.e., less number of additions/subtractions required. It operates on the fact that strings of 0’s in the multiplier require no addition but just shifting and a string of 1’s in the multiplier from bit weight 2^k to weight 2^m can be treated as 2^(k+1 ) to 2^m.
As in all multiplication schemes, booth algorithm requires examination of the multiplier bits and shifting of the partial product. Prior to the shifting, the multiplicand may be added to the partial product, subtracted from the partial product, or left unchanged according to following rules:
- The multiplicand is subtracted from the partial product upon encountering the first least significant 1 in a string of 1’s in the multiplier
- The multiplicand is added to the partial product upon encountering the first 0 (provided that there was a previous ‘1’) in a string of 0’s in the multiplier.
- The partial product does not change when the multiplier bit is identical to the previous multiplier bit.
Hardware Implementation of Booths Algorithm – The hardware implementation of the booth algorithm requires the register configuration shown in the figure below.
Booth’s Algorithm Flowchart –
We name the register as A, B and Q, AC, BR and QR respectively. Qn designates the least significant bit of multiplier in the register QR. An extra flip-flop Qn+1is appended to QR to facilitate a double inspection of the multiplier.The flowchart for the booth algorithm is shown below.
AC and the appended bit Qn+1 are initially cleared to 0 and the sequence SC is set to a number n equal to the number of bits in the multiplier. The two bits of the multiplier in Qn and Qn+1are inspected. If the two bits are equal to 10, it means that the first 1 in a string has been encountered. This requires subtraction of the multiplicand from the partial product in AC. If the 2 bits are equal to 01, it means that the first 0 in a string of 0’s has been encountered. This requires the addition of the multiplicand to the partial product in AC.
When the two bits are equal, the partial product does not change. An overflow cannot occur because the addition and subtraction of the multiplicand follow each other. As a consequence, the 2 numbers that are added always have a opposite signs, a condition that excludes an overflow. The next step is to shift right the partial product and the multiplier (including Qn+1). This is an arithmetic shift right (ashr) operation which AC and QR ti the right and leaves the sign bit in AC unchanged. The sequence counter is decremented and the computational loop is repeated n times.
Example – A numerical example of booth’s algorithm is shown below for n = 4. It shows the step by step multiplication of -5 and -7.
MD = -5 = 1011, MD = 1011, MD'+1 = 0101 MR = -7 = 1001 The explanation of first step is as follows: Qn+1 AC = 0000, MR = 1001, Qn+1 = 0, SC = 4 Qn Qn+1 = 10 So, we do AC + (MD)'+1, which gives AC = 0101 On right shifting AC and MR, we get AC = 0010, MR = 1100 and Qn+1 = 1
|AC + MD’ + 1||0101||1001||0|
|AC + MR||1101||1100||1|
|AC + MD’ + 1||0010||0011||1||0|
Product is calculated as follows:
Product = AC MR Product = 0010 0011 = 35
Best Case and Worst Case Occurrence:
Best case is when there is a large block of consecutive 1’s and 0’s in the multipliers, so that there is minimum number of logical operations taking place, as in addition and subtraction.
Worst case is when there are pairs of alternate 0’s and 1’s, either 01 or 10 in the multipliers, so that maximum number of additions and subtractions are required.
GATE Practice Questions –
- GATE IT 2008 | Question 40
- GATE IT 2006 | Question 38
- GATE IT 2005 | Question 8
- GATE CS 1996 | Question 23
Attention reader! Don’t stop learning now. Get hold of all the important DSA concepts with the DSA Self Paced Course at a student-friendly price and become industry ready.
- Computer Organization | Basic Computer Instructions
- Computer Organization | Performance of Computer
- Differences between Computer Architecture and Computer Organization
- Cache Memory in Computer Organization
- Computer Organization and Architecture | Pipelining | Set 1 (Execution, Stages and Throughput)
- Computer Organization and Architecture | Pipelining | Set 3 (Types and Stalling)
- Computer Organization and Architecture | Pipelining | Set 2 (Dependencies and Data Hazard)
- Computer Organization | Amdahl's law and its proof
- Computer Organization | Hardwired v/s Micro-programmed Control Unit
- Computer Organization | Micro-Operation
- Computer Organization | Different Instruction Cycles
- Computer Organization | Instruction Formats (Zero, One, Two and Three Address Instruction)
- Computer Organization | Problem Solving on Instruction Format
- Computer Organization | Von Neumann architecture
- Computer Organization | Asynchronous input output synchronization
- Computer Organization | Locality and Cache friendly code
- Last Minute Notes Computer Organization
- Synchronous Data Transfer in Computer Organization
- BUS Arbitration in Computer Organization
- MPU Communication in Computer Organization
If you like GeeksforGeeks and would like to contribute, you can also write an article using contribute.geeksforgeeks.org or mail your article to email@example.com. See your article appearing on the GeeksforGeeks main page and help other Geeks.
Please Improve this article if you find anything incorrect by clicking on the "Improve Article" button below.