Following questions have been asked in GATE CS 2008 exam.
1) Which of the following system calls results in the sending of SYN packets?
socket() creates a new socket of a certain socket type, identified by an integer number, and allocates system resources to it.
bind() is typically used on the server side, and associates a socket with a socket address structure, i.e. a specified local port number and IP address.
listen() is used on the server side, and causes a bound TCP socket to enter listening state.
connect() is used on the client side, and assigns a free local port number to a socket. In case of a TCP socket, it causes an attempt to establish a new TCP connection.
When connect() is called by client, following three way handshake happens to establish the connection in TCP.
1) The client requests a connection by sending a SYN (synchronize) message to the server.
2) The server acknowledges this request by sending SYN-ACK back to the client.
3) The client responds with an ACK, and the connection is established.
2) In the slow start phase of the TCP congestion control algorithm, the size of the congestion window
(A) does not increase
(B) increases linearly
(C) increases quadratically
(D) increases exponentially
Although the name is slow start, during the slow start phase, window size is increased by the number of segments acknowledged, which means window size grows exponentially. This happens until either an acknowledgment is not received for some segment or a predetermined threshold value is reached. See this for more details.
3) If a class B network on the Internet has a subnet mask of 255.255.248.0, what is the maximum number of hosts per subnet?
The binary representation of subnet mask is 11111111.11111111.11111000.00000000. There are 21 bits set in subnet. So 11 (32-21) bits are left for host ids. Total possible values of host ids is 2^11 = 2048. Out of these 2048 values, 2 addresses are reserved. The address with all bits as 1 is reserved as broadcast address and address with all host id bits as 0 is used as network address of subnet.
In general, the number of addresses usable for addressing specific hosts in each network is always 2^N – 2 where N is the number of bits for host id.
Please see GATE Corner for all previous year paper/solutions/explanations, syllabus, important dates, notes, etc.
Please write comments if you find any of the answers/explanations incorrect, or you want to share more information about the topics discussed above
Attention reader! Don’t stop learning now. Get hold of all the important CS Theory concepts for SDE interviews with the CS Theory Course at a student-friendly price and become industry ready.
- Computer Networks | Set 1
- Computer Networks | Set 2
- Computer Networks | Set 5
- Computer Networks | Set 3
- Computer Networks | Set 4
- Computer Networks | Set 12
- Computer Networks | Set 6
- Computer Networks | Set 8
- Computer Networks | Set 9
- Computer Networks | Set 10
- Computer Networks | Set 11
- Commonly asked Computer Networks Interview Questions | Set 1
- Computer Networks | Set 14
- Computer Networks | Set 13
- Last Minute Notes - Computer Networks
- Congestion Control in Computer Networks
- Error Detection in Computer Networks
- Computer Networks | IP Addressing | Question 5
- Computer Networks | IP Addressing | Question 6
- Line Configuration in Computer Networks