**Negative Number Representation**

**Sign Magnitude**

Sign magnitude is a very simple representation of negative numbers. In sign magnitude the first bit is dedicated to represent the sign and hence it is called sign bit.

Sign bit ‘1’ represents negative sign.

Sign bit ‘0’ represents positive sign.

In sign magnitude representation of a n – bit number, the first bit will represent sign and rest n-1 bits represent magnitude of number.

For example,

- +25 = 011001

Where 11001 = 25

And 0 for ‘+’

- -25 = 111001

Where 11001 = 25

And 1 for ‘-‘.

**Range of number represented by sign magnitude method **= -(2^{n-1}-1) to +(2^{n-1}-1) (for n bit number)

But there is one problem in sign magnitude and that is we have two representations of 0

+0 = 000000

– 0 = 100000

**2’s complement method**

To represent a negative number in this form, first we need to take the 1’s complement of the number represented in simple positive binary form and then add 1 to it.

For example:

(-8)10 = (1000)2

1’s complement of 1000 = 0111

Adding 1 to it, 0111 + 1 = 1000

So, (-8)10 = (1000)2

Please don’t get confused with (8)10 =1000 and (-8)10=1000 as with 4 bits, we can’t represent a positive number more than 7. So, 1000 is representing -8 only.

**Range of number represented by 2’s complement =** (-2^{n-1} to 2^{n-1} – 1)

**Floating point representation of numbers**

**32-bit representation floating point numbers IEEE standard**

- Floating point numbers are usually normalized
- Exponent is adjusted so that leading bit (MSB) of mantissa is 1
- Since it is always 1 there is no need to store it
- Scientific notation where numbers are normalized to give a single digit before the decimal point like in decimal system e.g. 3.123 x 10
^{3}

For example, we represent 3.625 in 32 bit format.

Changing 3 in binary=11

Changing .625 in binary

.625 X 2 1

.25 X 2 0

.5 X 2 1

Writing in binary exponent form

3.625=11.101 X 2^{0}

On normalizing

11.101 X 2^{0}=1.1101 X 2^{1}

On biasing exponent = 127 + 1 = 128

(128)10=(10000000) 2

**For getting significand**

Digits after decimal = 1101

Expanding to 23 bit = 11010000000000000000000

**Setting sign bit**

As it is a positive number, sign bit = 0

Finally we arrange according to representation

```
Sign bit exponent significand
0 10000000 11010000000000000000000
```

**64-bit representation floating point numbers IEEE standard**

Again we follow the same procedure upto normalization. After that, we add 1023 to bias the exponent.

For example, we represent -3.625 in 64 bit format.

Changing 3 in binary = 11

Changing .625 in binary

.625 X 2 1 .25 X 2 0 .5 X 2 1

Writing in binary exponent form

3.625 = 11.101 X 2^{0}

On normalizing

11.101 X 2^{0 }= 1.1101 X 2^{1}

On biasing exponent 1023 + 1 = 1024

(1024)10 = (10000000000)2

So 11 bit exponent = 10000000000

52 bit significand = 110100000000 …………. making total 52 bits

Setting sign bit = 1 (number is negative)

So, final representation

1 10000000000 110100000000 …………. making total 52 bits by adding further 0’s

**Converting floating point into decimal**

Let’s convert a FP number into decimal

1 01111100 11000000000000000000000

The decimal value of an IEEE number is given by the formula:

**(1 -2s) * (1 + f) * 2 ^{( e – bias )}**

where

- s, f and e fields are taken as decimal here.
- (1 -2s) is 1 or -1, depending upon sign bit 0 and 1
- add an implicit 1 to the significand (fraction field f), as in formula

Again, the bias is either 127 or 1023, for single or double precision respectively.

First convert each individual field to decimal.

- The sign bit s is 1
- The e field contains 01111100 = (124)10
- The mantissa is 0.11000 … = (0.75)10

Putting these values in formula

(1 – 2) * (1 + 0.75) * 2124 – 127 = ( – 1.75 * 2^{-3} ) = – 0.21875

This article has been contributed by Anuj Batham.

Please write comments if you find anything incorrect, or you want to share more information about the topic discussed above

Attention reader! Don’t stop learning now. Get hold of all the important DSA concepts with the **DSA Self Paced Course** at a student-friendly price and become industry ready.

## Recommended Posts:

- Cache Memory in Computer Organization
- Computer Arithmetic | Set - 2
- Computer Organization and Architecture | Pipelining | Set 1 (Execution, Stages and Throughput)
- Computer Organization and Architecture | Pipelining | Set 3 (Types and Stalling)
- Computer Organization and Architecture | Pipelining | Set 2 (Dependencies and Data Hazard)
- Computer Organization | Amdahl's law and its proof
- Computer Organization | Hardwired v/s Micro-programmed Control Unit
- Computer Architecture | Flynn's taxonomy
- Clusters In Computer Organisation
- Generations of Computer
- Simplified Instructional Computer (SIC)
- Computer Organization | Micro-Operation
- Computer Organization | Different Instruction Cycles
- Computer Organization | Booth's Algorithm
- Computer Organization | Basic Computer Instructions
- Arithmetic instructions in 8085 microprocessor
- Computer Organization | Instruction Formats (Zero, One, Two and Three Address Instruction)
- Arithmetic instructions in 8086 microprocessor
- Computer Organization | Problem Solving on Instruction Format
- Computer Organization | Von Neumann architecture