# Bitmasking and Dynamic Programming | Set 1 (Count ways to assign unique cap to every person)

Consider the below problems statement.

There are 100 different types of caps each having a unique id from 1 to 100. Also, there are ‘n’ persons each having a collection of a variable number of caps. One day all of these persons decide to go in a party wearing a cap but to look unique they decided that none of them will wear the same type of cap. So, count the total number of arrangements or ways such that none of them is wearing the same type of cap.

Constraints: 1 <= n <= 10 Example:

The first line contains the value of n, next n lines contain collections of all the n persons. Input: 3 5 100 1 // Collection of the first person. 2 // Collection of the second person. 5 100 // Collection of the third person. Output: 4 Explanation: All valid possible ways are (5, 2, 100), (100, 2, 5), (1, 2, 5) and (1, 2, 100)

Since, number of ways could be large, so output modulo 1000000007

**We strongly recommend you to minimize your browser and try this yourself first.**

A **Simple Solution** is to try all possible combinations. Start by picking the first element from the first set, marking it as visited and recur for remaining sets. It is basically a Backtracking based solution.

A **better solution is to use Bitmasking and DP**. Let us first introduce Bitmasking.

**What is Bitmasking?**

Suppose we have a collection of elements which are numbered from 1 to N. If we want to represent a subset of this set then it can be encoded by a sequence of N bits (we usually call this sequence a “mask”). In our chosen subset the i-th element belongs to it if and only if the i-th bit of the mask is set i.e., it equals to 1. For example, the mask 10000101 means that the subset of the set [1… 8] consists of elements 1, 3 and 8. We know that for a set of N elements there are total 2^{N} subsets thus 2^{N} masks are possible, one representing each subset. Each mask is, in fact, an integer number written in binary notation.

Our main methodology is to assign a value to each mask (and, therefore, to each subset) and thus calculate the values for new masks using values of the already computed masks. Usually our main target is to calculate value/solution for the complete set i.e., for mask 11111111. Normally, to find the value for a subset X we remove an element in every possible way and use values for obtained subsets X’_{1}, X’_{2}… ,X’_{k} to compute the value/solution for X. This means that the values for X’_{i} must have been computed already, so we need to establish an ordering in which masks will be considered. It’s easy to see that the natural ordering will do: go over masks in increasing order of corresponding numbers. Also, We sometimes, start with the empty subset X and we add elements in every possible way and use the values of obtained subsets X’_{1}, X’_{2}… ,X’_{k} to compute the value/solution for X.

We mostly use the following notations/operations on masks:

bit(i, mask) – the i-th bit of mask

count(mask) – the number of non-zero bits in the mask

first(mask) – the number of the lowest non-zero bit in the mask

set(i, mask) – set the ith bit in the mask

check(i, mask) – check the ith bit in the mask

**How is this problem solved using Bitmasking + DP?**

The idea is to use the fact that there are upto 10 persons. So we can use an integer variable as a bitmask to store which person is wearing a cap and which is not.

Let i be the current cap number (caps from 1 to i-1 are already processed). Let integer variable mask indicates that the persons w earing and not wearing caps. If i'th bit is set in mask, then i'th person is wearing a cap, else not. // consider the case when ith cap is not included // in the arrangement countWays(mask, i) = countWays(mask, i+1) + // when ith cap is included in the arrangement // so, assign this cap to all possible persons // one by one and recur for remaining persons. ∑ countWays(mask | (1 << j), i+1) for every person j that can wear cap i Note that the expression "mask | (1 << j)" sets j'th bit in mask. And a person can wear cap i if it is there in the person's cap list provided as input.

If we draw the complete recursion tree, we can observe that many subproblems are solved again and again. So we use Dynamic Programming. A table dp[][] is used such that in every entry dp[i][j], i is mask and j is cap number.

Since we want to access all persons that can wear a given cap, we use an array of vectors, capList[101]. A value capList[i] indicates the list of persons that can wear cap i.

Below is the implementation of above idea.

## C/C++

`// C++ program to find number of ways to wear hats ` `#include<bits/stdc++.h> ` `#define MOD 1000000007 ` `using` `namespace` `std; ` ` ` `// capList[i]'th vector contains the list of persons having a cap with id i ` `// id is between 1 to 100 so we declared an array of 101 vectors as indexing ` `// starts from 0. ` `vector<` `int` `> capList[101]; ` ` ` `// dp[2^10][101] .. in dp[i][j], i denotes the mask i.e., it tells that ` `// how many and which persons are wearing cap. j denotes the first j caps ` `// used. So, dp[i][j] tells the number ways we assign j caps to mask i ` `// such that none of them wears the same cap ` `int` `dp[1025][101]; ` ` ` `// This is used for base case, it has all the N bits set ` `// so, it tells whether all N persons are wearing a cap. ` `int` `allmask; ` ` ` `// Mask is the set of persons, i is cap-id (OR the ` `// number of caps processed starting from first cap). ` `long` `long` `int` `countWaysUtil(` `int` `mask, ` `int` `i) ` `{ ` ` ` `// If all persons are wearing a cap so we ` ` ` `// are done and this is one way so return 1 ` ` ` `if` `(mask == allmask) ` `return` `1; ` ` ` ` ` `// If not everyone is wearing a cap and also there are no more ` ` ` `// caps left to process, so there is no way, thus return 0; ` ` ` `if` `(i > 100) ` `return` `0; ` ` ` ` ` `// If we already have solved this subproblem, return the answer. ` ` ` `if` `(dp[mask][i] != -1) ` `return` `dp[mask][i]; ` ` ` ` ` `// Ways, when we don't include this cap in our arrangement ` ` ` `// or solution set. ` ` ` `long` `long` `int` `ways = countWaysUtil(mask, i+1); ` ` ` ` ` `// size is the total number of persons having cap with id i. ` ` ` `int` `size = capList[i].size(); ` ` ` ` ` `// So, assign one by one ith cap to all the possible persons ` ` ` `// and recur for remaining caps. ` ` ` `for` `(` `int` `j = 0; j < size; j++) ` ` ` `{ ` ` ` `// if person capList[i][j] is already wearing a cap so continue as ` ` ` `// we cannot assign him this cap ` ` ` `if` `(mask & (1 << capList[i][j])) ` `continue` `; ` ` ` ` ` `// Else assign him this cap and recur for remaining caps with ` ` ` `// new updated mask vector ` ` ` `else` `ways += countWaysUtil(mask | (1 << capList[i][j]), i+1); ` ` ` `ways %= MOD; ` ` ` `} ` ` ` ` ` `// Save the result and return it. ` ` ` `return` `dp[mask][i] = ways; ` `} ` ` ` `// Reads n lines from standard input for current test case ` `void` `countWays(` `int` `n) ` `{ ` ` ` `//----------- READ INPUT -------------------------- ` ` ` `string temp, str; ` ` ` `int` `x; ` ` ` `getline(cin, str); ` `// to get rid of newline character ` ` ` `for` `(` `int` `i=0; i<n; i++) ` ` ` `{ ` ` ` `getline(cin, str); ` ` ` `stringstream ss(str); ` ` ` ` ` `// while there are words in the streamobject ss ` ` ` `while` `(ss >> temp) ` ` ` `{ ` ` ` `stringstream s; ` ` ` `s << temp; ` ` ` `s >> x; ` ` ` ` ` `// add the ith person in the list of cap if with id x ` ` ` `capList[x].push_back(i); ` ` ` `} ` ` ` `} ` ` ` `//---------------------------------------------------- ` ` ` ` ` `// All mask is used to check whether all persons ` ` ` `// are included or not, set all n bits as 1 ` ` ` `allmask = (1 << n) - 1; ` ` ` ` ` `// Initialize all entries in dp as -1 ` ` ` `memset` `(dp, -1, ` `sizeof` `dp); ` ` ` ` ` `// Call recursive function count ways ` ` ` `cout << countWaysUtil(0, 1) << endl; ` `} ` ` ` `// Driver Program ` `int` `main() ` `{ ` ` ` `int` `n; ` `// number of persons in every test case ` ` ` `cin >> n; ` ` ` `countWays(n); ` ` ` `return` `0; ` `} ` |

*chevron_right*

*filter_none*

## Java

`// Java program to find number of ways to wear hats ` ` ` `import` `java.io.BufferedReader; ` `import` `java.io.InputStreamReader; ` `import` `java.util.Vector; ` ` ` `class` `Test ` `{ ` ` ` `static` `final` `int` `MOD = ` `1000000007` `; ` ` ` ` ` `// for input ` ` ` `static` `BufferedReader br = ` `new` `BufferedReader(` `new` `InputStreamReader(System.in)); ` ` ` ` ` `// capList[i]'th vector contains the list of persons having a cap with id i ` ` ` `// id is between 1 to 100 so we declared an array of 101 vectors as indexing ` ` ` `// starts from 0. ` ` ` `static` `Vector<Integer> capList[] = ` `new` `Vector[` `101` `]; ` ` ` ` ` ` ` `// dp[2^10][101] .. in dp[i][j], i denotes the mask i.e., it tells that ` ` ` `// how many and which persons are wearing cap. j denotes the first j caps ` ` ` `// used. So, dp[i][j] tells the number ways we assign j caps to mask i ` ` ` `// such that none of them wears the same cap ` ` ` `static` `int` `dp[][] = ` `new` `int` `[` `1025` `][` `101` `]; ` ` ` ` ` `// This is used for base case, it has all the N bits set ` ` ` `// so, it tells whether all N persons are wearing a cap. ` ` ` `static` `int` `allmask; ` ` ` ` ` `// Mask is the set of persons, i is cap-id (OR the ` ` ` `// number of caps processed starting from first cap). ` ` ` `static` `long` `countWaysUtil(` `int` `mask, ` `int` `i) ` ` ` `{ ` ` ` `// If all persons are wearing a cap so we ` ` ` `// are done and this is one way so return 1 ` ` ` `if` `(mask == allmask) ` `return` `1` `; ` ` ` ` ` `// If not everyone is wearing a cap and also there are no more ` ` ` `// caps left to process, so there is no way, thus return 0; ` ` ` `if` `(i > ` `100` `) ` `return` `0` `; ` ` ` ` ` `// If we already have solved this subproblem, return the answer. ` ` ` `if` `(dp[mask][i] != -` `1` `) ` `return` `dp[mask][i]; ` ` ` ` ` `// Ways, when we don't include this cap in our arrangement ` ` ` `// or solution set. ` ` ` `long` `ways = countWaysUtil(mask, i+` `1` `); ` ` ` ` ` `// size is the total number of persons having cap with id i. ` ` ` `int` `size = capList[i].size(); ` ` ` ` ` `// So, assign one by one ith cap to all the possible persons ` ` ` `// and recur for remaining caps. ` ` ` `for` `(` `int` `j = ` `0` `; j < size; j++) ` ` ` `{ ` ` ` `// if person capList[i][j] is already wearing a cap so continue as ` ` ` `// we cannot assign him this cap ` ` ` `if` `((mask & (` `1` `<< capList[i].get(j))) != ` `0` `) ` `continue` `; ` ` ` ` ` `// Else assign him this cap and recur for remaining caps with ` ` ` `// new updated mask vector ` ` ` `else` `ways += countWaysUtil(mask | (` `1` `<< capList[i].get(j)), i+` `1` `); ` ` ` `ways %= MOD; ` ` ` `} ` ` ` ` ` `// Save the result and return it. ` ` ` `return` `dp[mask][i] = (` `int` `) ways; ` ` ` `} ` ` ` ` ` `// Reads n lines from standard input for current test case ` ` ` `static` `void` `countWays(` `int` `n) ` `throws` `Exception ` ` ` `{ ` ` ` `//----------- READ INPUT -------------------------- ` ` ` `String str; ` ` ` `String split[]; ` ` ` `int` `x; ` ` ` ` ` `for` `(` `int` `i=` `0` `; i<n; i++) ` ` ` `{ ` ` ` `str = br.readLine(); ` ` ` `split = str.split(` `" "` `); ` ` ` ` ` `// while there are words in the split[] ` ` ` `for` `(` `int` `j = ` `0` `; j < split.length; j++) { ` ` ` `// add the ith person in the list of cap if with id x ` ` ` `x = Integer.parseInt(split[j]); ` ` ` `capList[x].add(i); ` ` ` `} ` ` ` ` ` `} ` ` ` `//---------------------------------------------------- ` ` ` ` ` `// All mask is used to check of all persons ` ` ` `// are included or not, set all n bits as 1 ` ` ` `allmask = (` `1` `<< n) - ` `1` `; ` ` ` ` ` `// Initialize all entries in dp as -1 ` ` ` `for` `(` `int` `[] is : dp) { ` ` ` `for` `(` `int` `i = ` `0` `; i < is.length; i++) { ` ` ` `is[i] = -` `1` `; ` ` ` `} ` ` ` `} ` ` ` ` ` `// Call recursive function count ways ` ` ` `System.out.println(countWaysUtil(` `0` `, ` `1` `)); ` ` ` `} ` ` ` ` ` `// Driver method ` ` ` `public` `static` `void` `main(String args[]) ` `throws` `Exception ` ` ` `{ ` ` ` `int` `n; ` `// number of persons in every test case ` ` ` ` ` `// initializing vector array ` ` ` `for` `(` `int` `i = ` `0` `; i < capList.length; i++) ` ` ` `capList[i] = ` `new` `Vector<>(); ` ` ` ` ` ` ` `n = Integer.parseInt(br.readLine()); ` ` ` `countWays(n); ` ` ` `} ` `} ` `// This code is contributed by Gaurav Miglani ` |

*chevron_right*

*filter_none*

## Python

`#Python program to find number of ways to wear hats ` `from` `collections ` `import` `defaultdict ` ` ` `class` `AssignCap: ` ` ` ` ` `# Initialize variables ` ` ` `def` `__init__(` `self` `): ` ` ` ` ` `self` `.allmask ` `=` `0` ` ` ` ` `self` `.total_caps ` `=` `100` ` ` ` ` `self` `.caps ` `=` `defaultdict(` `list` `) ` ` ` ` ` ` ` `# Mask is the set of persons, i is the current cap number. ` ` ` `def` `countWaysUtil(` `self` `,dp, mask, cap_no): ` ` ` ` ` `# If all persons are wearing a cap so we ` ` ` `# are done and this is one way so return 1 ` ` ` `if` `mask ` `=` `=` `self` `.allmask: ` ` ` `return` `1` ` ` ` ` `# If not everyone is wearing a cap and also there are no more ` ` ` `# caps left to process, so there is no way, thus return 0; ` ` ` `if` `cap_no > ` `self` `.total_caps: ` ` ` `return` `0` ` ` ` ` `# If we have already solved this subproblem, return the answer. ` ` ` `if` `dp[mask][cap_no]!` `=` `-` `1` `: ` ` ` `return` `dp[mask][cap_no] ` ` ` ` ` `# Ways, when we don't include this cap in our arrangement ` ` ` `# or solution set ` ` ` `ways ` `=` `self` `.countWaysUtil(dp, mask, cap_no ` `+` `1` `) ` ` ` ` ` `# assign ith cap one by one to all the possible persons ` ` ` `# and recur for remaining caps. ` ` ` `if` `cap_no ` `in` `self` `.caps: ` ` ` ` ` `for` `ppl ` `in` `self` `.caps[cap_no]: ` ` ` ` ` `# if person 'ppl' is already wearing a cap then continue ` ` ` `if` `mask & (` `1` `<< ppl) : ` `continue` ` ` ` ` `# Else assign him this cap and recur for remaining caps with ` ` ` `# new updated mask vector ` ` ` `ways ` `+` `=` `self` `.countWaysUtil(dp, mask | (` `1` `<< ppl), cap_no ` `+` `1` `) ` ` ` ` ` `ways ` `=` `ways ` `%` `(` `10` `*` `*` `9` `+` `7` `) ` ` ` ` ` `# Save the result and return it ` ` ` `dp[mask][cap_no] ` `=` `ways ` ` ` ` ` `return` `dp[mask][cap_no] ` ` ` ` ` ` ` ` ` `def` `countWays(` `self` `,N): ` ` ` ` ` `# Reads n lines from standard input for current test case ` ` ` `# create dictionary for cap. cap[i] = list of person having ` ` ` `# cap no i ` ` ` `for` `ppl ` `in` `range` `(N): ` ` ` ` ` `cap_possessed_by_person ` `=` `map` `(` `int` `, ` `raw_input` `().strip().split()) ` ` ` ` ` `for` `i ` `in` `cap_possessed_by_person: ` ` ` ` ` `self` `.caps[i].append(ppl) ` ` ` ` ` `# allmask is used to check if all persons ` ` ` `# are included or not, set all n bits as 1 ` ` ` `self` `.allmask ` `=` `(` `1` `<< N) ` `-` `1` ` ` ` ` `# Initialize all entries in dp as -1 ` ` ` `dp ` `=` `[[` `-` `1` `for` `j ` `in` `range` `(` `self` `.total_caps ` `+` `1` `)] ` `for` `i ` `in` `range` `(` `2` `*` `*` `N)] ` ` ` ` ` `# Call recursive function countWaysUtil ` ` ` `# result will be in dp[0][1] ` ` ` `print` `self` `.countWaysUtil(dp, ` `0` `, ` `1` `,) ` ` ` `#Driver Program ` `def` `main(): ` ` ` `No_of_people ` `=` `input` `() ` `# number of persons in every test case ` ` ` ` ` `AssignCap().countWays(No_of_people) ` ` ` ` ` `if` `__name__ ` `=` `=` `'__main__'` `: ` ` ` `main() ` ` ` `# This code is contributed by Neelam Yadav ` |

*chevron_right*

*filter_none*

Input:

3 5 100 1 2 5 100

Output:

4

This article is contributed by Gaurav Ahirwar. Please write comments if you find anything incorrect, or you want to share more information about the topic discussed above

GeeksforGeeks has prepared a complete interview preparation course with premium videos, theory, practice problems, TA support and many more features. Please refer Placement 100 for details

## Recommended Posts:

- Count the number of ways to tile the floor of size n x m using 1 x m size tiles
- Overlapping Subproblems Property in Dynamic Programming | DP-1
- Optimal Substructure Property in Dynamic Programming | DP-2
- Travelling Salesman Problem | Set 1 (Naive and Dynamic Programming)
- Generate all unique partitions of an integer
- Count all possible paths from top left to bottom right of a mXn matrix
- Count number of binary strings without consecutive 1's
- Count Possible Decodings of a given Digit Sequence
- Count all possible walks from a source to a destination with exactly k edges
- Count ways to reach the n'th stair
- Count number of ways to reach a given score in a game
- Vertex Cover Problem | Set 2 (Dynamic Programming Solution for Tree)
- Count possible ways to construct buildings
- Count numbers from 1 to n that have 4 as a digit
- Count of n digit numbers whose sum of digits equals to given sum