Open In App

Insertion in an AVL Tree

Improve
Improve
Improve
Like Article
Like
Save Article
Save
Share
Report issue
Report

 AVL Tree:

AVL tree is a self-balancing Binary Search Tree (BST) where the difference between heights of left and right subtrees cannot be more than one for all nodes. 

Example of AVL Tree:
 

The above tree is AVL because the differences between the heights of left and right subtrees for every node are less than or equal to 1.

Example of a Tree that is NOT an AVL Tree:

The above tree is not AVL because the differences between the heights of the left and right subtrees for 8 and 12 are greater than 1.

Why AVL Trees? 

Most of the BST operations (e.g., search, max, min, insert, delete.. etc) take O(h) time where h is the height of the BST. The cost of these operations may become O(n) for a skewed Binary tree. If we make sure that the height of the tree remains O(log(n)) after every insertion and deletion, then we can guarantee an upper bound of O(log(n)) for all these operations. The height of an AVL tree is always O(log(n)) where n is the number of nodes in the tree.

Insertion in AVL Tree:

To make sure that the given tree remains AVL after every insertion, we must augment the standard BST insert operation to perform some re-balancing. 
Following are two basic operations that can be performed to balance a BST without violating the BST property (keys(left) < key(root) < keys(right)). 

  • Left Rotation 
  • Right Rotation
T1, T2 and T3 are subtrees of the tree, rooted with y (on the left side) or x (on the right side)     
      
     y                               x
    / \     Right Rotation          /  \
   x   T3   - - - - - - - >        T1   y 
  / \       < - - - - - - -            / \
 T1  T2     Left Rotation            T2  T3
 
Keys in both of the above trees follow the following order 
keys(T1) < key(x) < keys(T2) < key(y) < keys(T3)
So BST property is not violated anywhere.
Recommended Practice

Steps to follow for insertion:

Let the newly inserted node be w 

  • Perform standard BST insert for w
  • Starting from w, travel up and find the first unbalanced node. Let z be the first unbalanced node, y be the child of z that comes on the path from w to z and x be the grandchild of z that comes on the path from w to z
  • Re-balance the tree by performing appropriate rotations on the subtree rooted with z. There can be 4 possible cases that need to be handled as x, y and z can be arranged in 4 ways.
  • Following are the possible 4 arrangements: 
    • y is the left child of z and x is the left child of y (Left Left Case) 
    • y is the left child of z and x is the right child of y (Left Right Case) 
    • y is the right child of z and x is the right child of y (Right Right Case) 
    • y is the right child of z and x is the left child of y (Right Left Case)

Following are the operations to be performed in above mentioned 4 cases. In all of the cases, we only need to re-balance the subtree rooted with z and the complete tree becomes balanced as the height of the subtree (After appropriate rotations) rooted with z becomes the same as it was before insertion.

1. Left Left Case 

T1, T2, T3 and T4 are subtrees.
         z                                      y 
        / \                                   /   \
       y   T4      Right Rotate (z)          x      z
      / \          - - - - - - - - ->      /  \    /  \ 
     x   T3                               T1  T2  T3  T4
    / \
  T1   T2

2. Left Right Case 

     z                               z                           x
    / \                            /   \                        /  \ 
   y   T4  Left Rotate (y)        x    T4  Right Rotate(z)    y      z
  / \      - - - - - - - - ->    /  \      - - - - - - - ->  / \    / \
T1   x                          y    T3                    T1  T2 T3  T4
    / \                        / \
  T2   T3                    T1   T2

3. Right Right Case 

  z                                y
 /  \                            /   \ 
T1   y     Left Rotate(z)       z      x
    /  \   - - - - - - - ->    / \    / \
   T2   x                     T1  T2 T3  T4
       / \
     T3  T4

4. Right Left Case 

   z                            z                            x
  / \                          / \                          /  \ 
T1   y   Right Rotate (y)    T1   x      Left Rotate(z)   z      y
    / \  - - - - - - - - ->     /  \   - - - - - - - ->  / \    / \
   x   T4                      T2   y                  T1  T2  T3  T4
  / \                              /  \
T2   T3                           T3   T4

Illustration of Insertion at AVL Tree

avlinsert1

 

avlinsert2-jpg

 

avlinsert3

 

avlinsert4

 

avlinsert5

Approach:

The idea is to use recursive BST insert, after insertion, we get pointers to all ancestors one by one in a bottom-up manner. So we don’t need a parent pointer to travel up. The recursive code itself travels up and visits all the ancestors of the newly inserted node. 

Follow the steps mentioned below to implement the idea:

  • Perform the normal BST insertion. 
  • The current node must be one of the ancestors of the newly inserted node. Update the height of the current node. 
  • Get the balance factor (left subtree height – right subtree height) of the current node. 
  • If the balance factor is greater than 1, then the current node is unbalanced and we are either in the Left Left case or left Right case. To check whether it is left left case or not, compare the newly inserted key with the key in the left subtree root
  • If the balance factor is less than -1, then the current node is unbalanced and we are either in the Right Right case or Right-Left case. To check whether it is the Right Right case or not, compare the newly inserted key with the key in the right subtree root.    

Below is the implementation of the above approach:

C++14




// C++ program to insert a node in AVL tree 
#include<bits/stdc++.h>
using namespace std;
  
// An AVL tree node 
class Node 
    public:
    int key; 
    Node *left; 
    Node *right; 
    int height; 
}; 
  
// A utility function to get the 
// height of the tree 
int height(Node *N) 
    if (N == NULL) 
        return 0; 
    return N->height; 
  
// A utility function to get maximum
// of two integers 
int max(int a, int b) 
    return (a > b)? a : b; 
  
/* Helper function that allocates a 
   new node with the given key and 
   NULL left and right pointers. */
Node* newNode(int key) 
    Node* node = new Node();
    node->key = key; 
    node->left = NULL; 
    node->right = NULL; 
    node->height = 1; // new node is initially
                      // added at leaf 
    return(node); 
  
// A utility function to right
// rotate subtree rooted with y 
// See the diagram given above. 
Node *rightRotate(Node *y) 
    Node *x = y->left; 
    Node *T2 = x->right; 
  
    // Perform rotation 
    x->right = y; 
    y->left = T2; 
  
    // Update heights 
    y->height = max(height(y->left),
                    height(y->right)) + 1; 
    x->height = max(height(x->left),
                    height(x->right)) + 1; 
  
    // Return new root 
    return x; 
  
// A utility function to left 
// rotate subtree rooted with x 
// See the diagram given above. 
Node *leftRotate(Node *x) 
    Node *y = x->right; 
    Node *T2 = y->left; 
  
    // Perform rotation 
    y->left = x; 
    x->right = T2; 
  
    // Update heights 
    x->height = max(height(x->left),    
                    height(x->right)) + 1; 
    y->height = max(height(y->left), 
                    height(y->right)) + 1; 
  
    // Return new root 
    return y; 
  
// Get Balance factor of node N 
int getBalance(Node *N) 
    if (N == NULL) 
        return 0; 
    return height(N->left) - height(N->right); 
  
// Recursive function to insert a key
// in the subtree rooted with node and
// returns the new root of the subtree. 
Node* insert(Node* node, int key) 
    /* 1. Perform the normal BST insertion */
    if (node == NULL) 
        return(newNode(key)); 
  
    if (key < node->key) 
        node->left = insert(node->left, key); 
    else if (key > node->key) 
        node->right = insert(node->right, key); 
    else // Equal keys are not allowed in BST 
        return node; 
  
    /* 2. Update height of this ancestor node */
    node->height = 1 + max(height(node->left), 
                        height(node->right)); 
  
    /* 3. Get the balance factor of this ancestor 
        node to check whether this node became 
        unbalanced */
    int balance = getBalance(node); 
  
    // If this node becomes unbalanced, then 
    // there are 4 cases 
  
    // Left Left Case 
    if (balance > 1 && key < node->left->key) 
        return rightRotate(node); 
  
    // Right Right Case 
    if (balance < -1 && key > node->right->key) 
        return leftRotate(node); 
  
    // Left Right Case 
    if (balance > 1 && key > node->left->key) 
    
        node->left = leftRotate(node->left); 
        return rightRotate(node); 
    
  
    // Right Left Case 
    if (balance < -1 && key < node->right->key) 
    
        node->right = rightRotate(node->right); 
        return leftRotate(node); 
    
  
    /* return the (unchanged) node pointer */
    return node; 
  
// A utility function to print preorder 
// traversal of the tree. 
// The function also prints height 
// of every node 
void preOrder(Node *root) 
    if(root != NULL) 
    
        cout << root->key << " "
        preOrder(root->left); 
        preOrder(root->right); 
    
  
// Driver Code
int main() 
    Node *root = NULL; 
      
    /* Constructing tree given in 
    the above figure */
    root = insert(root, 10); 
    root = insert(root, 20); 
    root = insert(root, 30); 
    root = insert(root, 40); 
    root = insert(root, 50); 
    root = insert(root, 25); 
      
    /* The constructed AVL Tree would be 
                30 
            / \ 
            20 40 
            / \ \ 
        10 25 50 
    */
    cout << "Preorder traversal of the "
            "constructed AVL tree is \n"
    preOrder(root); 
      
    return 0; 
  
// This code is contributed by
// rathbhupendra


C




// C program to insert a node in AVL tree
#include<stdio.h>
#include<stdlib.h>
  
// An AVL tree node
struct Node
{
    int key;
    struct Node *left;
    struct Node *right;
    int height;
};
  
// A utility function to get the height of the tree
int height(struct Node *N)
{
    if (N == NULL)
        return 0;
    return N->height;
}
  
// A utility function to get maximum of two integers
int max(int a, int b)
{
    return (a > b)? a : b;
}
  
/* Helper function that allocates a new node with the given key and
    NULL left and right pointers. */
struct Node* newNode(int key)
{
    struct Node* node = (struct Node*)
                        malloc(sizeof(struct Node));
    node->key   = key;
    node->left   = NULL;
    node->right  = NULL;
    node->height = 1;  // new node is initially added at leaf
    return(node);
}
  
// A utility function to right rotate subtree rooted with y
// See the diagram given above.
struct Node *rightRotate(struct Node *y)
{
    struct Node *x = y->left;
    struct Node *T2 = x->right;
  
    // Perform rotation
    x->right = y;
    y->left = T2;
  
    // Update heights
    y->height = max(height(y->left),
                    height(y->right)) + 1;
    x->height = max(height(x->left),
                    height(x->right)) + 1;
  
    // Return new root
    return x;
}
  
// A utility function to left rotate subtree rooted with x
// See the diagram given above.
struct Node *leftRotate(struct Node *x)
{
    struct Node *y = x->right;
    struct Node *T2 = y->left;
  
    // Perform rotation
    y->left = x;
    x->right = T2;
  
    //  Update heights
    x->height = max(height(x->left),   
                    height(x->right)) + 1;
    y->height = max(height(y->left),
                    height(y->right)) + 1;
  
    // Return new root
    return y;
}
  
// Get Balance factor of node N
int getBalance(struct Node *N)
{
    if (N == NULL)
        return 0;
    return height(N->left) - height(N->right);
}
  
// Recursive function to insert a key in the subtree rooted
// with node and returns the new root of the subtree.
struct Node* insert(struct Node* node, int key)
{
    /* 1.  Perform the normal BST insertion */
    if (node == NULL)
        return(newNode(key));
  
    if (key < node->key)
        node->left  = insert(node->left, key);
    else if (key > node->key)
        node->right = insert(node->right, key);
    else // Equal keys are not allowed in BST
        return node;
  
    /* 2. Update height of this ancestor node */
    node->height = 1 + max(height(node->left),
                        height(node->right));
  
    /* 3. Get the balance factor of this ancestor
          node to check whether this node became
          unbalanced */
    int balance = getBalance(node);
  
    // If this node becomes unbalanced, then
    // there are 4 cases
  
    // Left Left Case
    if (balance > 1 && key < node->left->key)
        return rightRotate(node);
  
    // Right Right Case
    if (balance < -1 && key > node->right->key)
        return leftRotate(node);
  
    // Left Right Case
    if (balance > 1 && key > node->left->key)
    {
        node->left =  leftRotate(node->left);
        return rightRotate(node);
    }
  
    // Right Left Case
    if (balance < -1 && key < node->right->key)
    {
        node->right = rightRotate(node->right);
        return leftRotate(node);
    }
  
    /* return the (unchanged) node pointer */
    return node;
}
  
// A utility function to print preorder traversal
// of the tree.
// The function also prints height of every node
void preOrder(struct Node *root)
{
    if(root != NULL)
    {
        printf("%d ", root->key);
        preOrder(root->left);
        preOrder(root->right);
    }
}
  
/* Driver program to test above function*/
int main()
{
  struct Node *root = NULL;
  
  /* Constructing tree given in the above figure */
  root = insert(root, 10);
  root = insert(root, 20);
  root = insert(root, 30);
  root = insert(root, 40);
  root = insert(root, 50);
  root = insert(root, 25);
  
  /* The constructed AVL Tree would be
            30
           /  \
         20   40
        /  \     \
       10  25    50
  */
  
  printf("Preorder traversal of the constructed AVL"
         " tree is \n");
  preOrder(root);
  
  return 0;
}


Java




// Java program for insertion in AVL Tree
class Node {
    int key, height;
    Node left, right;
  
    Node(int d) {
        key = d;
        height = 1;
    }
}
  
class AVLTree {
  
    Node root;
  
    // A utility function to get the height of the tree
    int height(Node N) {
        if (N == null)
            return 0;
  
        return N.height;
    }
  
    // A utility function to get maximum of two integers
    int max(int a, int b) {
        return (a > b) ? a : b;
    }
  
    // A utility function to right rotate subtree rooted with y
    // See the diagram given above.
    Node rightRotate(Node y) {
        Node x = y.left;
        Node T2 = x.right;
  
        // Perform rotation
        x.right = y;
        y.left = T2;
  
        // Update heights
        y.height = max(height(y.left), height(y.right)) + 1;
        x.height = max(height(x.left), height(x.right)) + 1;
  
        // Return new root
        return x;
    }
  
    // A utility function to left rotate subtree rooted with x
    // See the diagram given above.
    Node leftRotate(Node x) {
        Node y = x.right;
        Node T2 = y.left;
  
        // Perform rotation
        y.left = x;
        x.right = T2;
  
        //  Update heights
        x.height = max(height(x.left), height(x.right)) + 1;
        y.height = max(height(y.left), height(y.right)) + 1;
  
        // Return new root
        return y;
    }
  
    // Get Balance factor of node N
    int getBalance(Node N) {
        if (N == null)
            return 0;
  
        return height(N.left) - height(N.right);
    }
  
    Node insert(Node node, int key) {
  
        /* 1.  Perform the normal BST insertion */
        if (node == null)
            return (new Node(key));
  
        if (key < node.key)
            node.left = insert(node.left, key);
        else if (key > node.key)
            node.right = insert(node.right, key);
        else // Duplicate keys not allowed
            return node;
  
        /* 2. Update height of this ancestor node */
        node.height = 1 + max(height(node.left),
                              height(node.right));
  
        /* 3. Get the balance factor of this ancestor
              node to check whether this node became
              unbalanced */
        int balance = getBalance(node);
  
        // If this node becomes unbalanced, then there
        // are 4 cases Left Left Case
        if (balance > 1 && key < node.left.key)
            return rightRotate(node);
  
        // Right Right Case
        if (balance < -1 && key > node.right.key)
            return leftRotate(node);
  
        // Left Right Case
        if (balance > 1 && key > node.left.key) {
            node.left = leftRotate(node.left);
            return rightRotate(node);
        }
  
        // Right Left Case
        if (balance < -1 && key < node.right.key) {
            node.right = rightRotate(node.right);
            return leftRotate(node);
        }
  
        /* return the (unchanged) node pointer */
        return node;
    }
  
    // A utility function to print preorder traversal
    // of the tree.
    // The function also prints height of every node
    void preOrder(Node node) {
        if (node != null) {
            System.out.print(node.key + " ");
            preOrder(node.left);
            preOrder(node.right);
        }
    }
  
    public static void main(String[] args) {
        AVLTree tree = new AVLTree();
  
        /* Constructing tree given in the above figure */
        tree.root = tree.insert(tree.root, 10);
        tree.root = tree.insert(tree.root, 20);
        tree.root = tree.insert(tree.root, 30);
        tree.root = tree.insert(tree.root, 40);
        tree.root = tree.insert(tree.root, 50);
        tree.root = tree.insert(tree.root, 25);
  
        /* The constructed AVL Tree would be
             30
            /  \
          20   40
         /  \     \
        10  25    50
        */
        System.out.println("Preorder traversal" +
                        " of constructed tree is : ");
        tree.preOrder(tree.root);
    }
}
// This code has been contributed by Mayank Jaiswal


Python3




# Python code to insert a node in AVL tree
  
# Generic tree node class
class TreeNode(object):
    def __init__(self, val):
        self.val = val
        self.left = None
        self.right = None
        self.height = 1
  
# AVL tree class which supports the 
# Insert operation
class AVL_Tree(object):
  
    # Recursive function to insert key in 
    # subtree rooted with node and returns
    # new root of subtree.
    def insert(self, root, key):
      
        # Step 1 - Perform normal BST
        if not root:
            return TreeNode(key)
        elif key < root.val:
            root.left = self.insert(root.left, key)
        else:
            root.right = self.insert(root.right, key)
  
        # Step 2 - Update the height of the 
        # ancestor node
        root.height = 1 + max(self.getHeight(root.left),
                           self.getHeight(root.right))
  
        # Step 3 - Get the balance factor
        balance = self.getBalance(root)
  
        # Step 4 - If the node is unbalanced, 
        # then try out the 4 cases
        # Case 1 - Left Left
        if balance > 1 and key < root.left.val:
            return self.rightRotate(root)
  
        # Case 2 - Right Right
        if balance < -1 and key > root.right.val:
            return self.leftRotate(root)
  
        # Case 3 - Left Right
        if balance > 1 and key > root.left.val:
            root.left = self.leftRotate(root.left)
            return self.rightRotate(root)
  
        # Case 4 - Right Left
        if balance < -1 and key < root.right.val:
            root.right = self.rightRotate(root.right)
            return self.leftRotate(root)
  
        return root
  
    def leftRotate(self, z):
  
        y = z.right
        T2 = y.left
  
        # Perform rotation
        y.left = z
        z.right = T2
  
        # Update heights
        z.height = 1 + max(self.getHeight(z.left),
                         self.getHeight(z.right))
        y.height = 1 + max(self.getHeight(y.left),
                         self.getHeight(y.right))
  
        # Return the new root
        return y
  
    def rightRotate(self, z):
  
        y = z.left
        T3 = y.right
  
        # Perform rotation
        y.right = z
        z.left = T3
  
        # Update heights
        z.height = 1 + max(self.getHeight(z.left),
                        self.getHeight(z.right))
        y.height = 1 + max(self.getHeight(y.left),
                        self.getHeight(y.right))
  
        # Return the new root
        return y
  
    def getHeight(self, root):
        if not root:
            return 0
  
        return root.height
  
    def getBalance(self, root):
        if not root:
            return 0
  
        return self.getHeight(root.left) - self.getHeight(root.right)
  
    def preOrder(self, root):
  
        if not root:
            return
  
        print("{0} ".format(root.val), end="")
        self.preOrder(root.left)
        self.preOrder(root.right)
  
  
# Driver program to test above function
myTree = AVL_Tree()
root = None
  
root = myTree.insert(root, 10)
root = myTree.insert(root, 20)
root = myTree.insert(root, 30)
root = myTree.insert(root, 40)
root = myTree.insert(root, 50)
root = myTree.insert(root, 25)
  
"""The constructed AVL Tree would be
            30
           /  \
         20   40
        /  \     \
       10  25    50"""
  
# Preorder Traversal
print("Preorder traversal of the",
      "constructed AVL tree is")
myTree.preOrder(root)
print()
  
# This code is contributed by Ajitesh Pathak


C#




// C# program for insertion in AVL Tree 
using System;
  
class Node 
    public int key, height; 
    public Node left, right; 
  
    public Node(int d)
    
        key = d; 
        height = 1; 
    
  
public class AVLTree 
  
    Node root; 
  
    // A utility function to get
    // the height of the tree 
    int height(Node N) 
    
        if (N == null
            return 0; 
  
        return N.height; 
    
  
    // A utility function to get
    // maximum of two integers 
    int max(int a, int b) 
    
        return (a > b) ? a : b; 
    
  
    // A utility function to right 
    // rotate subtree rooted with y 
    // See the diagram given above. 
    Node rightRotate(Node y) 
    
        Node x = y.left; 
        Node T2 = x.right; 
  
        // Perform rotation 
        x.right = y; 
        y.left = T2; 
  
        // Update heights 
        y.height = max(height(y.left),
                    height(y.right)) + 1; 
        x.height = max(height(x.left),
                    height(x.right)) + 1; 
  
        // Return new root 
        return x; 
    
  
    // A utility function to left
    // rotate subtree rooted with x 
    // See the diagram given above. 
    Node leftRotate(Node x) 
    
        Node y = x.right; 
        Node T2 = y.left; 
  
        // Perform rotation 
        y.left = x; 
        x.right = T2; 
  
        // Update heights 
        x.height = max(height(x.left), 
                    height(x.right)) + 1; 
        y.height = max(height(y.left), 
                    height(y.right)) + 1; 
  
        // Return new root 
        return y; 
    
  
    // Get Balance factor of node N 
    int getBalance(Node N)
    
        if (N == null
            return 0; 
  
        return height(N.left) - height(N.right); 
    
  
    Node insert(Node node, int key) 
    
  
        /* 1. Perform the normal BST insertion */
        if (node == null
            return (new Node(key)); 
  
        if (key < node.key) 
            node.left = insert(node.left, key); 
        else if (key > node.key) 
            node.right = insert(node.right, key); 
        else // Duplicate keys not allowed 
            return node; 
  
        /* 2. Update height of this ancestor node */
        node.height = 1 + max(height(node.left), 
                            height(node.right)); 
  
        /* 3. Get the balance factor of this ancestor 
            node to check whether this node became 
            unbalanced */
        int balance = getBalance(node); 
  
        // If this node becomes unbalanced, then there 
        // are 4 cases Left Left Case 
        if (balance > 1 && key < node.left.key) 
            return rightRotate(node); 
  
        // Right Right Case 
        if (balance < -1 && key > node.right.key) 
            return leftRotate(node); 
  
        // Left Right Case 
        if (balance > 1 && key > node.left.key) 
        
            node.left = leftRotate(node.left); 
            return rightRotate(node); 
        
  
        // Right Left Case 
        if (balance < -1 && key < node.right.key) 
        
            node.right = rightRotate(node.right); 
            return leftRotate(node); 
        
  
        /* return the (unchanged) node pointer */
        return node; 
    
  
    // A utility function to print preorder traversal 
    // of the tree. 
    // The function also prints height of every node 
    void preOrder(Node node) 
    
        if (node != null)
        
            Console.Write(node.key + " "); 
            preOrder(node.left); 
            preOrder(node.right); 
        
    
  
    // Driver code
    public static void Main(String[] args) 
    
        AVLTree tree = new AVLTree(); 
  
        /* Constructing tree given in the above figure */
        tree.root = tree.insert(tree.root, 10); 
        tree.root = tree.insert(tree.root, 20); 
        tree.root = tree.insert(tree.root, 30); 
        tree.root = tree.insert(tree.root, 40); 
        tree.root = tree.insert(tree.root, 50); 
        tree.root = tree.insert(tree.root, 25); 
  
        /* The constructed AVL Tree would be 
            30 
            / \ 
        20 40 
        / \ \ 
        10 25 50 
        */
        Console.Write("Preorder traversal"
                        " of constructed tree is : "); 
        tree.preOrder(tree.root); 
    
  
// This code has been contributed
// by PrinciRaj1992


Javascript




<script>
  
      // JavaScript program for insertion in AVL Tree
      class Node {
        constructor(d) {
          this.key = d;
          this.height = 1;
          this.left = null;
          this.right = null;
        }
      }
  
      class AVLTree {
        constructor() {
          this.root = null;
        }
  
        // A utility function to get
        // the height of the tree
        height(N) {
          if (N == null) return 0;
  
          return N.height;
        }
  
        // A utility function to get
        // maximum of two integers
        max(a, b) {
          return a > b ? a : b;
        }
  
        // A utility function to right
        // rotate subtree rooted with y
        // See the diagram given above.
        rightRotate(y) {
          var x = y.left;
          var T2 = x.right;
  
          // Perform rotation
          x.right = y;
          y.left = T2;
  
          // Update heights
          y.height = this.max(this.height(y.left), 
          this.height(y.right)) + 1;
          x.height = this.max(this.height(x.left), 
          this.height(x.right)) + 1;
  
          // Return new root
          return x;
        }
  
        // A utility function to left
        // rotate subtree rooted with x
        // See the diagram given above.
        leftRotate(x) {
          var y = x.right;
          var T2 = y.left;
  
          // Perform rotation
          y.left = x;
          x.right = T2;
  
          // Update heights
          x.height = this.max(this.height(x.left), 
          this.height(x.right)) + 1;
          y.height = this.max(this.height(y.left), 
          this.height(y.right)) + 1;
  
          // Return new root
          return y;
        }
  
        // Get Balance factor of node N
        getBalance(N) {
          if (N == null) return 0;
  
          return this.height(N.left) - this.height(N.right);
        }
  
        insert(node, key) {
          /* 1. Perform the normal BST insertion */
          if (node == null) return new Node(key);
  
          if (key < node.key) 
          node.left = this.insert(node.left, key);
          else if (key > node.key) 
          node.right = this.insert(node.right, key);
          // Duplicate keys not allowed
          else return node;
  
          /* 2. Update height of this ancestor node */
          node.height =
            1 + this.max(this.height(node.left),
                this.height(node.right));
  
          /* 3. Get the balance factor of this ancestor
            node to check whether this node became
            unbalanced */
          var balance = this.getBalance(node);
  
          // If this node becomes unbalanced, then there
          // are 4 cases Left Left Case
          if (balance > 1 && key < node.left.key)
          return this.rightRotate(node);
  
          // Right Right Case
          if (balance < -1 && key > node.right.key)
            return this.leftRotate(node);
  
          // Left Right Case
          if (balance > 1 && key > node.left.key) {
            node.left = this.leftRotate(node.left);
            return this.rightRotate(node);
          }
  
          // Right Left Case
          if (balance < -1 && key < node.right.key) {
            node.right = this.rightRotate(node.right);
            return this.leftRotate(node);
          }
  
          /* return the (unchanged) node pointer */
          return node;
        }
  
        // A utility function to print preorder traversal
        // of the tree.
        // The function also prints height of every node
        preOrder(node) {
          if (node != null) {
            document.write(node.key + " ");
            this.preOrder(node.left);
            this.preOrder(node.right);
          }
        }
      }
      // Driver code
      var tree = new AVLTree();
  
      /* Constructing tree given in the above figure */
      tree.root = tree.insert(tree.root, 10);
      tree.root = tree.insert(tree.root, 20);
      tree.root = tree.insert(tree.root, 30);
      tree.root = tree.insert(tree.root, 40);
      tree.root = tree.insert(tree.root, 50);
      tree.root = tree.insert(tree.root, 25);
  
      /* The constructed AVL Tree would be
            30
            / \
           20 40
          / \   \
         10 25  50
        */
      document.write(
      "Preorder traversal of the " + "constructed AVL tree is <br>"
      );
      tree.preOrder(tree.root);
        
</script>


Output

Preorder traversal of the constructed AVL tree is 
30 20 10 25 40 50 

Complexity Analysis

Time Complexity: O(log(n)), For Insertion
Auxiliary Space: O(1)

The rotation operations (left and right rotate) take constant time as only a few pointers are being changed there. Updating the height and getting the balance factor also takes constant time. So the time complexity of the AVL insert remains the same as the BST insert which is O(h) where h is the height of the tree. Since the AVL tree is balanced, the height is O(Logn). So time complexity of AVL insert is O(Logn).

Comparison with Red Black Tree:

The AVL tree and other self-balancing search trees like Red Black are useful to get all basic operations done in O(log n) time. The AVL trees are more balanced compared to Red-Black Trees, but they may cause more rotations during insertion and deletion. So if your application involves many frequent insertions and deletions, then Red Black trees should be preferred. And if the insertions and deletions are less frequent and search is the more frequent operation, then the AVL tree should be preferred over Red Black Tree.

Following is the post for deletion in AVL Tree:
AVL Tree | Set 2 (Deletion)



Last Updated : 03 Oct, 2023
Like Article
Save Article
Previous
Next
Share your thoughts in the comments
Similar Reads