apt-get is a command-line tool which helps in handling packages in Linux. Its main task is to retrieve the information and packages from the authenticated sources for installation, upgrade and removal of packages along with their dependencies. Here APT stands for the Advanced Packaging Tool.
apt-get [options] command or apt-get [options] install|remove pkg1 [pkg2 ...] or apt-get [options] source pkg1 [pkg2 ...]
Most Used Commands: You need to provide one of the commands below, if
-h option is not used.
- update : This command is used to synchronize the package index files from their sources again. You need to perform an update before you upgrade or dist-upgrade.
- upgrade : This command is used to install the latest versions of the packages currently installed on the user’s system from the sources enumerated in
/etc/apt/sources.list. The installed packages which have new packages available are retrieved and installed. You need to perform an update before the upgrade, so that apt-get knows that new versions of packages are available.
- dselect-upgrade : This is used alongwith the Debian packaging tool,
dselect. It follows the changes made by
dselectto the Status field of available packages, and performs any actions necessary to realize that state.
- dist-upgrade : This command performs the function of upgrade, and also handles changing dependencies with new versions of packages. If necessary, the
apt-getcommand will try to upgrade important packages at the expense of less important ones. It may also remove some packages in this process.
- install : This command is used to install or upgrade packages. It is followed by one or more package names the user wishes to install. All the dependencies of the desired packages will also be retrieved and installed. The user can also select the desired version by following the package name with an ‘equals’ and the desired version number. Also, the user can select a specific distribution by following the package name with a forward slash and the version or the archive name (e.g. ‘stable’, ‘testing’ or ‘unstable’). Both of these version selection methods have the potential to downgrade the packages, so must be used with care.
apt-get install [...PACKAGES]
- remove : This is similar to
install, with the difference being that it removes the packages instead of installing. It does not remove any configuration files created by the package.
apt-get remove [...PACKAGES]
- purge : This command removes the packages, and also removes any configuration files related to the packages.
apt-get purge [...PACKAGES]
check : This command is used to update the package cache and checks for broken dependencies.
download : This command is used to download the given binary package in the current directory.
apt-get download [...PACKAGES]
clean : This command is used to clear out the local repository of retrieved package files. It removes everything but not the lock file from
autoremove : Sometimes the packages which are automatically installed to satisfy the dependencies of other packages, are no longer needed then
autoremovecommand is used to remove these kind of packages.
- –no-install-recommends : By passing this option, the user lets apt-get know not to consider recommended packages as a dependency to install.
apt-get --no-install-recommends [...COMMAND]
- –install-suggests : By passing this option, the user lets apt-get know that it should consider suggested packages as dependencies to install.
apt-get --install-suggests [...COMMAND]
- -d or –download-only : By passing this option, the user specifies that apt-get should only retrieve the packages, and not unpack or install them.
apt-get -d [...COMMAND]
- -f or –fix-broken : By passing this option, the user specifies that apt-get should attempt to correct the system with broken dependencies in place.
apt-get -f [...COMMAND]
- -m or –ignore-missing or –fix-missing : By passing this option, the user specifies that apt-get should ignore the missing packages ( packages that cannot be retrieved or fail the integrity check ) and handle the result.
apt-get -m [...COMMAND]
–no-download : By passing this command, the user disables downloading for apt-get. It means that it should only use the .debs it has already downloaded.
- -q or –quiet : When this option is specified, apt-get produces output which is suitable for logging.
- -s or –simulate or –just-print or –dry-run or –recon or –no-act : This option specifies that no action should be taken, and perform a simulation of events that would occur based on the current system, but do not change the system.
apt-get -s [...COMMAND]
- -y or –yes or –assume-yes : During the execution of apt-get command, it may sometimes prompt the user for a yes/no. With this option, it is specified that it should assume ‘yes’ for all prompts, and should run without any interaction.
apt-get -y [...COMMAND]
- –assume-no : With this option, apt-get assumes ‘no’ for all prompts.
apt-get --assume-no [...COMMAND]
- –no-show-upgraded : With this option, apt-get will not show the list of all packages that are to be upgraded.
apt-get --no-show-upgraded [...COMMAND]
- -V or –verbose-versions : With this option, apt-get will show full versions for upgraded and installed packages.
apt-get -V [...COMMAND]
- –show-progress : With this option, apt-get will show user-friendly progress in the terminal window when the packages are being installed, removed or upgraded.
apt-get --show-progress [...COMMAND]
- -b or –compile or –build : With this option, apt-get will compile/build the source packages it downloads.
apt-get -b [...COMMAND]
- –no-upgrade : With this option, apt-get prevents the packages from being upgraded if they are already installed.
apt-get --no-upgrade [...COMMAND]
- –only-upgrade : With this option, apt-get will only upgrade the packages which are already installed, and not install new packages.
apt-get --only-upgrade [...COMMAND]
- –reinstall : With this option, apt-get reinstalls the packages that are already installed, at their latest versions.
apt-get --reinstall [...COMMAND]
- –auto-remove or –autoremove : When using apt-get with install or remove command, this option acts like running the autoremove command.
apt-get install/remove --autoremove [...PACKAGES]
- -h or –help : With this option, apt-get displays a short usage summary.
- -v or –version : With this option, apt-get displays it’s current version number.
Note: apt-get command will return 0 for successful executions, and decimal 100 in case of errors.
- atd command in Linux with examples
- rcp Command in Linux with examples
- apt command in linux with examples
- cd command in Linux with Examples
- df Command in Linux with examples
- tee command in Linux with examples
- gcc command in Linux with examples
- if command in linux with examples
- scp command in Linux with Examples
- help Command in Linux with examples
- ed command in Linux with examples
- last command in Linux with Examples
- cal command in Linux with Examples
- rm command in Linux with examples
- atq command in linux with examples
If you like GeeksforGeeks and would like to contribute, you can also write an article using contribute.geeksforgeeks.org or mail your article to firstname.lastname@example.org. See your article appearing on the GeeksforGeeks main page and help other Geeks.
Please Improve this article if you find anything incorrect by clicking on the "Improve Article" button below.