We have discussed Asymptotic Analysis, and Worst, Average and Best Cases of Algorithms. The main idea of asymptotic analysis is to have a measure of efficiency of algorithms that doesn’t depend on machine specific constants, and doesn’t require algorithms to be implemented and time taken by programs to be compared. Asymptotic notations are mathematical tools to represent time complexity of algorithms for asymptotic analysis. The following 3 asymptotic notations are mostly used to represent time complexity of algorithms.

**1) Θ Notation:** The theta notation bounds a functions from above and below, so it defines exact asymptotic behavior.

A simple way to get Theta notation of an expression is to drop low order terms and ignore leading constants. For example, consider the following expression.

3n^{3} + 6n^{2} + 6000 = Θ(n^{3})

Dropping lower order terms is always fine because there will always be a n0 after which Θ(n^{3}) has higher values than Θn^{2}) irrespective of the constants involved.

For a given function g(n), we denote Θ(g(n)) is following set of functions.

Θ(g(n)) = {f(n): there exist positive constants c1, c2 and n0 such that 0 <= c1*g(n) <= f(n) <= c2*g(n) for all n >= n0}

The above definition means, if f(n) is theta of g(n), then the value f(n) is always between c1*g(n) and c2*g(n) for large values of n (n >= n0). The definition of theta also requires that f(n) must be non-negative for values of n greater than n0.

**2) Big O Notation:** The Big O notation defines an upper bound of an algorithm, it bounds a function only from above. For example, consider the case of Insertion Sort. It takes linear time in best case and quadratic time in worst case. We can safely say that the time complexity of Insertion sort is O(n^2). Note that O(n^2) also covers linear time.

If we use Θ notation to represent time complexity of Insertion sort, we have to use two statements for best and worst cases:

1. The worst case time complexity of Insertion Sort is Θ(n^2).

2. The best case time complexity of Insertion Sort is Θ(n).

The Big O notation is useful when we only have upper bound on time complexity of an algorithm. Many times we easily find an upper bound by simply looking at the algorithm.

O(g(n)) = { f(n): there exist positive constants c and n0 such that 0 <= f(n) <= c*g(n) for all n >= n0}

**3) Ω Notation:** Just as Big O notation provides an asymptotic upper bound on a function, Ω notation provides an asymptotic lower bound.

Ω Notation can be useful when we have lower bound on time complexity of an algorithm. As discussed in the previous post, the best case performance of an algorithm is generally not useful, the Omega notation is the least used notation among all three.

For a given function g(n), we denote by Ω(g(n)) the set of functions.

Ω (g(n)) = {f(n): there exist positive constants c and n0 such that 0 <= c*g(n) <= f(n) for all n >= n0}.

Let us consider the same Insertion sort example here. The time complexity of Insertion Sort can be written as Ω(n), but it is not a very useful information about insertion sort, as we are generally interested in worst case and sometimes in average case.

Properties of Asymptotic Notations :

As we have gone through the definition of this three notations let’s now discuss some important properties of those notations.

**General Properties :**If f(n) is O(g(n)) then a*f(n) is also O(g(n)) ; where a is a constant.

Example: f(n) = 2n²+5 is O(n²)

then 7*f(n) = 7(2n²+5)

= 14n²+35 is also O(n²)Similarly this property satisfies for both Θ and Ω notation.

We can say

If f(n) is Θ(g(n)) then a*f(n) is also Θ(g(n)) ; where a is a constant.

If f(n) is Ω (g(n)) then a*f(n) is also Ω (g(n)) ; where a is a constant.**Reflexive Properties :**If f(n) is given then f(n) is O(f(n)).

Example: f(n) = n² ; O(n²) i.e O(f(n))

Similarly this property satisfies for both Θ and Ω notation.

We can say

If f(n) is given then f(n) is Θ(f(n)).

If f(n) is given then f(n) is Ω (f(n)).**Transitive Properties :**If f(n) is O(g(n)) and g(n) is O(h(n)) then f(n) = O(h(n)) .

Example: if f(n) = n , g(n) = n² and h(n)=n³

n is O(n²) and n² is O(n³)

then n is O(n³)Similarly this property satisfies for both Θ and Ω notation.

We can say

If f(n) is Θ(g(n)) and g(n) is Θ(h(n)) then f(n) = Θ(h(n)) .

If f(n) is Ω (g(n)) and g(n) is Ω (h(n)) then f(n) = Ω (h(n))**Symmetric Properties :**If f(n) is Θ(g(n)) then g(n) is Θ(f(n)) .

Example: f(n) = n² and g(n) = n²

then f(n) = Θ(n²) and g(n) = Θ(n²)**This property only satisfies for Θ notation.****Transpose Symmetric Properties :**If f(n) is O(g(n)) then g(n) is Ω (f(n)).

Example: f(n) = n , g(n) = n²

then n is O(n²) and n² is Ω (n)**This property only satisfies for O and Ω notations**.**Some More Properties :**- If f(n) = O(g(n)) and f(n) = Ω(g(n)) then f(n) = Θ(g(n))
- If f(n) = O(g(n)) and d(n)=O(e(n))

then f(n) + d(n) = O( max( g(n), e(n) ))

Example: f(n) = n i.e O(n)

d(n) = n² i.e O(n²)

then f(n) + d(n) = n + n² i.e O(n²) - If f(n)=O(g(n)) and d(n)=O(e(n))

then f(n) * d(n) = O( g(n) * e(n) )

Example: f(n) = n i.e O(n)

d(n) = n² i.e O(n²)

then f(n) * d(n) = n * n² = n³ i.e O(n³)

**Exercise:**

Which of the following statements is/are valid?

**1.** Time Complexity of QuickSort is Θ(n^2)

**2.** Time Complexity of QuickSort is O(n^2)

**3.** For any two functions f(n) and g(n), we have f(n) = Θ(g(n)) if and only if f(n) = O(g(n)) and f(n) = Ω(g(n)).

**4. ** Time complexity of all computer algorithms can be written as Ω(1)

**Important Links :**

- There are two more notations called
**little o and little omega**. Little o provides strict upper bound (equality condition is removed from Big O) and little omega provides strict lower bound (equality condition removed from big omega) - Analysis of Algorithms | Set 4 (Analysis of Loops)
- Recent Articles on analysis of algorithm.

**References:**

Lec 1 | MIT (Introduction to Algorithms)

This article is contributed by **Abhay Rathi**. Please write comments if you find anything incorrect, or you want to share more information about the topic discussed above.

Attention reader! Don’t stop learning now. Get hold of all the important DSA concepts with the **DSA Self Paced Course** at a student-friendly price and become industry ready.

## Recommended Posts:

- Analysis of Algorithms | Set 1 (Asymptotic Analysis)
- Properties of Asymptotic Notations
- Asymptotic Analysis and comparison of sorting algorithms
- Analysis of algorithms | little o and little omega notations
- Analysis of Algorithms | Set 4 (Analysis of Loops)
- Analysis of Algorithms | Big-O analysis
- Analysis of Algorithm | Set 5 (Amortized Analysis Introduction)
- Analysis of Algorithms | Set 2 (Worst, Average and Best Cases)
- Analysis of Algorithms | Set 5 (Practice Problems)
- Algorithms Sample Questions | Set 3 | Time Order Analysis
- Analysis of Algorithm | Set 4 (Solving Recurrences)
- Practice Questions on Time Complexity Analysis
- Analysis of different sorting techniques
- Time Complexity Analysis | Tower Of Hanoi (Recursion)
- Amortized analysis for increment in counter
- Complexity Analysis of Binary Search
- Difference between Posteriori and Priori analysis
- Complexity analysis of various operations of Binary Min Heap
- Algorithms | Recurrences | Set 1
- Algorithms Sample Questions | Recurrences | Set 2