Prerequisite – Ethernet Frame Format
- Topology – Ring topology
- Transmission – Unidirectional
- Encoding – Differential Manchester encoding
- Access control – Token passing
- Data rates – 4 Mbps, 16 Mbps
Token Ring Frame format:
- Start frame delimiter (SFD) – Alerts each station for the arrival of token(or data frame) or start of the frame. It is used to synchronize clocks.
- Access control (AC) –
Priority bits and reservation bits help in implementing priority. Priority bits = reservation bits = 3. Eg:- server is given priority = 7 and client is given priority = 0.
Token bit is used to indicate presence of token frame. If token bit = 1 –> token frame and if token bit = 0 –> not a token frame.
Monitor bit helps in solving orphan packet problem. It is covered by CRC as monitor are powerful machines which can recalculate CRC when modifying monitor bit. If monitor bit = 1 –> stamped by monitor and if monitor bit = 0 –> not yet stamped by monitor.
- Frame control (FC) – First 2 bits indicates whether the frame contains data or control information. In control frames, this byte specifies the type of control information.
- Destination address (DA) and Source address (SA) – consist of two 6-byte fields which is used to indicate MAC address of source and destination.
- Data – Data length can vary from 0 to maximum token holding time (THT) according to token reservation strategy adopted. Token ring imposes no lower bound on size of data i.e. an advantage over Ethernet.
- Cyclic redundancy check (CRC) – 32 bit CRC which is used to check for errors in the frame, i.e., whether the frame is corrupted or not. If the frame is corrupted, then its discarded.
- End delimiter (ED) – It is used to mark the end of frame. In Ethernet, length field is used for this purpose. It also contains bits to indicate a damaged frame and identify the frame that is the last in a logical sequence.
- Frame status (FS) – It Is a 1-byte field terminating a data frame.
It makes use of 2 copies of AC bits are used as a error detection mechanism (100% redundancy) as CRC does not cover FS byte so that destination does not have to recalculate CRC when modifying AC bits.
- Computer Network | Efficiency Of Token Ring
- Computer Network | Ethernet Frame Format
- Computer Networks | Problems with Token Ring
- Computer Networks | Minimum length of Token Ring
- Computer Network | Token Bus (IEEE 802.4)
- Computer Network | Simple network management protocol (SNMP)
- Computer Network | Integrated services digital network (ISDN)
- Computer Network | Synchronous Optical Network (SONET)
- Computer Network | Types of Network address translation (NAT)
- Computer Network | Packet flow in different network
- Computer Network | Packet flow in the same network
- Computer Network | Network address translation (NAT)
- Computer Network | Network goals
- Computer Network | Evolution of Network
- Computer Network | Network Simulator 3
If you like GeeksforGeeks and would like to contribute, you can also write an article using contribute.geeksforgeeks.org or mail your article to firstname.lastname@example.org. See your article appearing on the GeeksforGeeks main page and help other Geeks.
Please Improve this article if you find anything incorrect by clicking on the "Improve Article" button below.